Shop
Showing 1–15 of 1015 resultsSorted by popularity
- Accessories, Boards, Modules and Accessories
Metal Film Resistors (1/4 Watt)
– High precision 1/4 Watt metal film resistors for accurate resistance control
– Low noise design ideal for audio circuits and sensitive electronics
– Stable, durable metal film construction for long-term performance
– Compact 1/4 watt package suitable for space-constrained designs
– RoHS compliant for environmental safety and regulatory compliance
– Perfect for audio systems, precision instruments, electronics projects; fast Islamabad deliverySKU: n/a - Accessories, Boards, Modules and Accessories
LED’s 5mm
– Compact 5mm LED lights ideal for tight spaces and precision circuits.
– Available in single colors (red, green, blue, white) and RGB options.
– Bright, energy-efficient 5mm LED bulbs with long lifespan.
– Clear and diffused lenses for different lighting effects.
– Perfect for Arduino, Raspberry Pi, robotics, and DIY electronics projects.
– Fast delivery in Islamabad for hobbyists and professionals.SKU: n/a - Boards, Modules and Accessories, Accessories
JST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
Boards, Modules and Accessories, AccessoriesJST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
– Compact JST male connector with 2.54mm pitch and 3-pin configuration
– Available in straight and right-angle PCB mounting styles
– Corrosion-resistant metal contacts and durable plastic housing
– Secure, stable connections for power, ground and signal lines
– Ideal for Arduino, robotics, RC models, sensors and prototyping
– Package includes 1 × JST Male Connector 2.54mm (3-Pin)SKU: n/a - Batteries, Cells and Power Supply
Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh)
- Compact 18650 cylindrical cell (18×65 mm) with high energy density for extended runtime.
- Reliable 2000mAh nominal capacity and stable 3.7V output for consistent device performance.
- Long cycle life rated for hundreds of charge/discharge cycles for durable use.
- Built-in safety protections including overcharge, over-discharge, short-circuit and overheat safeguards.
- Low self-discharge for better storage retention and less maintenance charging.
- Lightweight and versatile – suitable for consumer electronics, power tools, EV packs and renewable storage.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
HC-SR04 Ultrasonic Distance Sensor Module
– Accurate non-contact distance measurement from 2 cm to 400 cm
– High precision with up to 3 mm resolution
– Uses 40 kHz ultrasonic waves for reliable detection
– Easy 4-pin interface (VCC, Trig, Echo, GND); Arduino and Raspberry Pi compatible
– Fast response time (<10 ms) and low power consumption (15 mA)
– Compact, lightweight, and cost-effective for robotics, automation, and DIY projectsSKU: n/a - Boards, Modules and Accessories, Accessories
Tactile Push Button Switch
– Momentary tactile feedback for reliable user input
– Compact 6mm x 6mm size, ideal for tight spaces
– Durable construction rated for over 100,000 presses
– Easy to integrate with Arduino, Raspberry Pi, and other microcontrollers
– Low contact resistance for stable performance
– Available in multiple colors for visible or coded controlsSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
SG90 9g Micro Servo Motor (180 Degree Rotation)
Boards, Modules and Accessories, Motors, Drivers and WheelsSG90 9g Micro Servo Motor (180 Degree Rotation)
- Small & lightweight — fits tight spaces and lightweight projects
- Precise 180° movement for accurate positioning
- PWM control compatible with Arduino & Raspberry Pi
- Runs on 4.8V–6V (batteries, USB, or adapters)
- Durable build with standard connectors and mounting holes
- Affordable choice for students, hobbyists and educators
SKU: n/a - Accessories, Boards, Modules and Accessories
MB102 830 Tie Points Solderless Breadboard
– 830 tie-points for flexible prototyping
– Solderless design for quick, mess-free circuit building
– Built-in power rails for clean positive and negative supply wiring
– Compatible with Arduino, Raspberry Pi and standard jumper wires
– Durable, compact and portable — ideal for students, makers and engineers
– Order now from Colgroad for fast delivery in IslamabadSKU: n/a - Accessories, Boards, Modules and Accessories
Metal Film Resistors (5% 1/4 Watt) (Small Values)
– Metal film resistors with thin film technology for low noise and high stability
– 5% tolerance for balanced accuracy and value
– 1/4 watt (0.25 W) power rating for low-power designs
– Small resistance values from 1 ohm to 100 ohm for fine tuning
– Axial leads and clear etched markings for easy PCB placement
– Ideal for audio, sensors, LED drivers, and precision circuitsSKU: n/a - Integrated Circuits (ICs)
7408 Quad 2-Input AND Gate IC (DIP)
- Four independent 2-input AND gates in a single DIP-14 package
- Standard TTL 74xx family device; operates on 5V supply
- High-speed switching for dependable digital logic performance
- Inputs and outputs compatible with common TTL and CMOS devices
- Breadboard- and PCB-friendly DIP-14 package for easy prototyping
- Ideal for education, lab kits, microcontroller interfacing, and control logic
SKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs
Boards, Modules and Accessories, Accessories20cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs
- 40pcs or 20pcs male-to-male jumper wire set for breadboard and header connections.
- Each wire measures 20cm for flexible routing and neat layouts.
- Male pins on both ends for easy pin-to-pin connections.
- Assorted colors to simplify wiring and debugging.
- Durable, flexible insulated construction for repeated use.
- Perfect for Arduino, Raspberry Pi, ESP32, prototyping and DIY projects.
SKU: n/a - Boards, Modules and Accessories, Accessories
Ceramic Capacitors (Non-Polar)
- Non-polar design — works in AC and DC circuits without polarity concerns.
- High voltage rating for demanding power and industrial systems.
- Excellent high-frequency performance for RF and communication circuits.
- Temperature-stable ceramic dielectric for consistent operation across ranges.
- Durable, long-lasting construction suitable for industrial and consumer electronics.
- Compact SMD and thru-hole options for space-constrained PCB designs.
SKU: n/a - Accessories
26AWG High Quality Red Wire for DIY Projects (1meter)
- Premium 26AWG single-core red wire, 1 meter length
- Pure copper conductor for excellent conductivity and low resistance
- Durable red PVC insulation for polarity identification and protection
- Flexible and easy to route in breadboards, terminals, and small enclosures
- Ideal for Arduino, Raspberry Pi, sensors, prototyping, and STEM projects
- Beginner-friendly: easy to strip, cut, and solder for fast prototyping
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
MG90S Metal Gear Servo Motor (180 Degree Rotation)
Boards, Modules and Accessories, Motors, Drivers and WheelsMG90S Metal Gear Servo Motor (180 Degree Rotation)
- High-torque metal-gear micro servo for robust, reliable motion.
- Precision 180° rotation with accurate angular positioning.
- Wide operating voltage (4.8V–6V) and fast response (0.10s/60° @4.8V; 0.08s/60° @6V).
- Compact (22.8 × 12.2 × 28.5 mm) and lightweight (13 g) — ideal for tight spaces.
- Versatile: perfect for robotics, RC vehicles, camera gimbals, and education.
- Cost-effective, durable design with metal gears for extended use.
SKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
Boards, Modules and Accessories, Accessories20cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
– 20pcs or 40pcs male-to-female jumper wire set
– 20cm length for flexible connections
– Male pin to female socket for versatile interfacing
– Assorted colors for easy circuit identification
– Durable, insulated and reusable leads
– Compatible with Arduino, Raspberry Pi, ESP32 and moreSKU: n/a
- Accessories, Motors, Drivers and Wheels
3-Pin Servo Extension Cable Wire 30cm/50cm
– Standard 3-pin male-to-female servo extension for reliable signal and power.
– Available in two lengths: 30 cm and 50 cm to suit different layouts.
– Standard 2.54 mm pitch compatible with most servos and controllers.
– Flexible multicore insulated wire with copper conductors for durability.
– Color-coded leads for easy connection: Brown/Red/Yellow or Black/Red/White.
– No soldering required; quick plug-and-play installation for RC, Arduino, and robotics projects.SKU: n/a - Accessories
10cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs
– 10 cm male-to-male jumper wires for breadboard connections
– Standard 2.54 mm pitch, compatible with Arduino, Raspberry Pi and ESP modules
– Available in 20 or 40 piece multicolor ribbon packs
– Flexible PVC insulation with copper conductor, reusable for prototyping
– Solder-free pin-to-pin connections for fast testing and neat wiringSKU: n/a - Accessories
SOIC8 SOP8 Flash Chip IC Test Clip Adapter EEPROM Socket
– Clip-on SOIC8/SOP8 adapter for in-circuit programming and reading of 8-pin flash and EEPROM chips
– Works with most SPI flash, EEPROM, and BIOS ICs in SOIC8/SOP8 packages
– Strong spring-loaded clip ensures stable, reliable pin contact
– Solderless connection saves time and reduces risk of PCB or IC damage
– Includes flat ribbon cable for easy connection to programmers and testers
– Durable plastic body with metal contacts, reusable for repeated useSKU: n/a - Batteries, Cells and Power Supply
8V 2A Rechargeable Li-Ion Battery 7.4V Battery 18650 cell Battery
– Nominal 7.4 V Li-Ion battery pack (8.4 V fully charged)
– Rated discharge current 2 A for consistent power delivery
– Built with 18650 cells for high energy density and long run time
– Rechargeable design with long cycle life and low self discharge
– Built-in protection: overcharge, over-discharge, over-current, short circuit
– Compact, lightweight form factor for robotics, IoT, RC, and portable electronicsSKU: n/a - Batteries, Cells and Power Supply
12V 2A Rechargeable Li-Ion Battery 11.1V Battery 18650 cell Battery
Batteries, Cells and Power Supply12V 2A Rechargeable Li-Ion Battery 11.1V Battery 18650 cell Battery
– Nominal 11.1V output (12.6V fully charged) compatible with 12V systems.
– Rated continuous current: 2 A for steady power delivery.
– Built with 18650 Li-Ion cells for high energy density and low weight.
– Rechargeable pack with long cycle life and low self-discharge.
– Integrated protection against over-charge, over-discharge, and short circuits.
– Compact, portable battery pack ideal for robotics, IoT, CCTV, and DIY projects.SKU: n/a - Accessories
433MHz Antenna for LoRa Ra-02 Module
– Optimized for the 433 MHz ISM band specially for LoRa RA-02 modules
– Extends transmission and reception range over PCB or onboard antennas
– High efficiency design with low signal loss and stable radiation pattern
– Compact, lightweight and easy to integrate into small enclosures
– Plug-and-play compatibility with RA-02 antenna interface
– Durable RF conductor with insulated coating, typically black finishSKU: n/a - Accessories
25x10x3mm Mini Square Block Heavy Duty Neodymium Magnets
– Compact 25x10x3mm rectangular neodymium block magnet for space-constrained designs
– Heavy duty NdFeB material for superior magnetic strength
– Slim 3mm thickness with larger 25x10mm contact area for stable holding
– Ni-Cu-Ni nickel plating for corrosion resistance and long life
– Axially magnetized and suitable for precision mounting and alignment
– Ideal for electronics, robotics, DIY, crafts, fixtures, and educational useSKU: n/a - Accessories
20x10x3mm Mini Square Block Heavy Duty Neodymium Magnets
– High-strength NdFeB neodymium material for superior magnetic pull
– Compact 20×10×3 mm square block with large contact surface
– Axially magnetized for uniform magnetic performance
– Durable Ni-Cu-Ni nickel plating for corrosion resistance
– Heavy duty grade for reliable holding, fixing, and alignment
– Ideal for electronics, robotics, DIY, crafts, and precision mountingSKU: n/a - Accessories
20x6x3mm Mini Square Block Heavy Duty Neodymium Magnets
– Compact 20 x 6 x 3 mm mini square block Neodymium (NdFeB) magnet
– Heavy duty, high-strength magnetic pull for reliable holding
– Axially magnetized with Ni-Cu-Ni nickel coating for corrosion resistance
– Ideal for electronics, robotics, DIY, crafts, and precision alignment
– Operates typically up to 80 °C; not suitable for high-temperature applications
– Durable rectangular design for stable surface contact and alignmentSKU: n/a - Accessories
15x10x2mm Mini Square Block Heavy Duty Neodymium Magnets
– Compact 15×10×2 mm mini square block neodymium magnet for tight, low-profile installations
– Heavy duty NdFeB construction for superior holding force
– Slim 2 mm thickness ideal for flush mounting and precision alignment
– Durable Ni-Cu-Ni nickel plating for improved corrosion resistance
– Axially magnetized with uniform field suitable for electronics, robotics, and DIY
– Works well for magnetic closures, holders, fixtures, crafts, and educational projectsSKU: n/a - Accessories
20x3mm Mini Round Heavy Duty Neodymium Magnets
– High-strength NdFeB mini round magnet (20 mm diameter, 3 mm thick)
– Slim, low-profile disc ideal for flat mounting and limited thickness
– Durable Ni-Cu-Ni nickel plating for corrosion resistance
– Axially magnetized for strong surface holding and alignment
– Suitable for electronics, robotics, crafts, and DIY projects
– Reliable heavy duty performance for fixtures, closures, and demonstrationsSKU: n/a - Accessories
15x2mm Mini Round Heavy Duty Neodymium Magnets
– High-strength neodymium (NdFeB) material for superior magnetic force
– 15 mm diameter with a slim 2 mm profile for thin mounting
– Round disc shape for even magnetic field and easy placement
– Durable Ni-Cu-Ni nickel plating for improved corrosion resistance
– Heavy duty holding performance for repeated use in demanding applications
– Ideal for electronics, robotics, DIY, crafts, magnetic closures and thin-mount projectsSKU: n/a
