-10%

JGB37-550 12V 680RPM High Torque DC Gear Motor

Availability:

In stock


  • JGB37-550 geared DC motor with integrated reduction gearbox
  • 12V DC operation with approximately 680RPM geared output
  • High torque output for robot cars and mobile platforms
  • Forward and reverse rotation by reversing polarity
  • Works with a suitable motor driver for Arduino and ESP32 builds
  • Compact 37mm class cylindrical body for DIY and automation projects
WhatsAppChat on WhatsApp

₨ 2,250 ₨ 2,500

In stock

The JGB37-550 12V 680RPM High Torque DC Gear Motor is a geared DC motor designed for robotics, automation, DIY mechanical projects, and motorized applications requiring a relatively high geared output speed with useful torque.

Operating at 12V DC and providing an output speed of approximately 680RPM, this motor is suitable for robot vehicles, mobile platforms, conveyor mechanisms, rotating assemblies, and other projects where higher speed is required while maintaining the torque advantage of a geared motor.

Key Features

  • JGB37-550 geared DC motor
  • 12V DC operating voltage
  • Approximately 680RPM output speed
  • High-torque geared output
  • Integrated reduction gearbox
  • Compact cylindrical design
  • Suitable for robotics and automation
  • Suitable for motorized mechanical projects
  • Forward and reverse operation possible

Technical Specifications

  • Product Type: DC Gear Motor
  • Model: JGB37-550
  • Rated Voltage: 12V DC
  • Output Speed: Approximately 680RPM
  • Gearbox: Integrated reduction gearbox
  • Motor Size: 37mm class
  • Output: Geared rotating shaft
  • Direction: Forward and reverse by reversing motor polarity
  • Application: Robotics, automation, DIY and mechanical projects

Note: Actual torque, current consumption, gearbox ratio, shaft dimensions, mounting dimensions, and other specifications may vary according to the specific motor version and manufacturer.

Working Principle

The motor converts electrical energy into rotational motion. The integrated gearbox reduces the motor’s original high-speed rotation and transfers it to the output shaft at a controlled speed while increasing the available mechanical torque.

The direction of rotation can be changed by reversing the motor’s electrical polarity. For Arduino, ESP32, or other microcontroller projects, a suitable motor driver should be used to control the motor safely.

Applications

  • Robot cars and mobile robots
  • 2WD and 4WD robotic platforms
  • High-speed robotic projects
  • DIY automation systems
  • Motorized platforms
  • Conveyor mechanisms
  • Rotating mechanisms
  • Educational robotics projects
  • Mechanical prototypes
  • Custom automation systems

Advantages

  • High 680RPM geared output speed
  • 12V DC operation
  • Provides useful torque through the integrated gearbox
  • Suitable for higher-speed robotic applications
  • Compact and practical design
  • Supports forward and reverse operation
  • Suitable for automation and DIY projects
  • Easy to control using a suitable motor driver

Usage Tips

  • Use a suitable 12V DC power source.
  • Always use an appropriate motor driver for microcontroller-based projects.
  • Do not connect the motor directly to an Arduino or ESP32 GPIO pin.
  • Avoid exceeding the rated voltage.
  • Ensure the motor is securely mounted before operation.
  • Avoid prolonged operation under stall or excessive mechanical load.
  • Check the shaft and mounting dimensions before installation.

Note: Images are for Illustration Purposes Only.

What comes with the JGB37-550 gear motor?

You receive the JGB37-550 12V 680RPM gear motor on its own. The gearbox is built into the motor body, so there is nothing extra to assemble before you mount it.

  • One JGB37-550 12V DC gear motor with integrated reduction gearbox
  • Geared output shaft, ready to couple to a wheel, pulley or linkage
  • Two motor terminals for power and direction control

Wiring, a motor driver, a 12V power source and mounting hardware are not included. For microcontroller builds, plan for a suitable motor driver between the motor and your board. Our JGB37-520 DC gear motor wiring and control guide walks through the same driver and polarity basics, and you can browse more options in our Motors, Drivers and Wheels range.

How do I choose the right motor for my robot or project?

Match the motor to your load and your power supply first, then check the shaft and mounting fit. The JGB37-550 gives you a geared output of about 680RPM at 12V, which suits robot cars, mobile platforms and rotating mechanisms that need speed with the torque of a gearbox.

Before you buy, check these points:

  • Speed vs torque: a higher RPM motor moves faster but pushes less; a lower RPM geared motor pushes harder. Pick the balance your project needs.
  • Voltage: this motor is rated for 12V DC. Do not exceed the rated voltage.
  • Driver: never connect the motor straight to an Arduino or ESP32 GPIO pin. Use a suitable motor driver.
  • Fit: check the shaft and mounting dimensions against your chassis or bracket before installation.

If you are unsure which version fits your build, message us with your project details and we will help you pick. We ship across Pakistan at a flat rate of Rs 350, and students can ask us for guidance on parts for school, college and university projects.

Frequently Asked Questions

Can I run the JGB37-550 motor at a voltage other than 12V?

This motor is rated for 12V DC, and we recommend staying within that rating. Running it above the rated voltage can overheat the motor and shorten its life. For a 12V supply, use a suitable power source and a motor driver for microcontroller control. If your project runs on a different voltage, contact us and we will suggest a motor that fits.

How do I reverse the direction of this gear motor?

Reverse the motor’s electrical polarity. Swapping the positive and negative connections at the two motor terminals makes the shaft spin the other way. In a microcontroller build, use a motor driver that supports direction control, such as an H-bridge driver, and switch direction in your code. Never wire the motor directly to a GPIO pin.

How much does the JGB37-550 12V 680RPM gear motor cost?

The JGB37-550 12V 680RPM high torque DC gear motor is priced at Rs. 2,250. It is in stock and ready to order. We deliver nationwide across Pakistan at a flat shipping rate of Rs 350. Message us on WhatsApp if you want to confirm current price and availability before ordering.

Is this motor good for a robot car or a 4WD platform?

Yes. The geared 680RPM output at 12V suits robot cars, 2WD and 4WD platforms, mobile robots and rotating mechanisms that need speed with gearbox torque. Check the shaft and mounting dimensions against your chassis before installation, and use a suitable motor driver. For steering or arm joints, a servo such as the SG90 or MG90S may suit better.

Do you deliver this motor outside Rawalpindi?

Yes. We deliver nationwide across Pakistan at a flat-rate shipping of Rs 350. College Road Electronics is based on College Road, Rawalpindi, and we supply students, hobbyists and engineers across the country. Order online and we will dispatch your motor. Contact us if you need help choosing the right motor or driver for your project.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop