Hot Products Today
-
Accessories, Students Corner
Arduino UNO Acrylic Experimental Board Platform in Pakistan
- This is a acrylic fixed plate for Arduino UNO R3 development board, a 8cm x 5cm-400 hole breadboard and UNO R3 board can be installed on the plate, fixed by 6 nylon columns, experiment conveniently.
- Material: Acrylic plate
- Simple relocation or location of the project.
- Simply connect development board with the solder field.
Package Include:
- 4 x Rubber ear plugs
- 1 x Acrylic development platform for Arduino UNO
- 1 x linked material (plastic) for mounting the Arduino UNO
Note: Delivery does not include Arduino UNO and not the solder field.
Best Online Shopping Website for Acrylic development platform for Arduino UNO in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Boards and Programmer, Students Corner
Arduino Mega2560-16A Pro Mini Board in Pakistan
The board has compact size 38×52mm. It is a good solution, to make your final project on solder prototyping board. You can find all pinouts on board: digital’s I/O – 70 and analog’s input – 16.Mega 2560 PRO MINI as functionality similar to the Arduino Mega 2560. It is built on MINI board, but the same stable, and uses the original chips ATmega2560 (16MHz). The board has a USB interface, based on USB-serial converter CH340G. For connecting to PC, pls use the Micro USB cable.You can supply power to board through the power pin-headers or USB interface. Output current for 5V version – about 800mA, for 3.3V version – about 800mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
Specifications:
- Microcontroller: ATmega2560
- USB-TTL Converter: CH340
- Power Out: 5V-800mA
- Power IN: 5V
- Power IN: VIN/DC Jack9-12V
- Power Consumption: 5V 220mA
- Logic Level : 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type: ISP
- Operating temperature: −40С°/+85С°
- Length×Width: 38×54mm
Features:
- Form factor: PRO MINI
- Microcontroller : ATmega 2560 (16Mhz)
- Input voltage: 6-9V (peack 18V)
- I/O: 70 digital, 16 analog
- UART: 4 bus
- PCB size: 38mm×52mm
Package Include:
- 1 x Arduino Mega2560-16A Pro Mini Board
Best Online Shopping Website for Arduino Mega2560-16A Pro Mini Board Atmeg260 Board in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
CNC and 3D Printers, Students Corner
8mm smooth rod
Diameter: 8mm
Length: 100-400mm optionalMaterial: 45 high quality carbon steel (S45C), chrome plated, tempered hard shaftAccuracy: G6 H6Roughness: Ra0.4-0.8Characteristics:The linear axis of the automatic rotation device is wideUsed, as industrial robots, automatic recordingInstruments, computers, precision printers, special gasTank, automatic wood machines and other industrial machinesMachines And due to its hardness, it can be extendedThe life of an ordinary instrument.
SKU: n/a -
RC Drones and Accessories, Students Corner
A2212 1000KV BLDC Brushless Motor in Pakistan
Model: A2212/10T. Material: durable aluminum alloy. Motor dimensions: ?27.5 x 30mm; Shaft diameter: ?3.17mmSuitable for RC helicopter, airplane, quadcopter and multi-copter.KV: 2200rmp/V. Max efficiency: 80%. Max efficiency current: 4-10A (>75%)Current Capacity: 12A/60s. No Load Current @ 10V: 0.5A. Number of Cells: 2-3 Li-PolySpecifications:
- Color: as shown in the pictures
- Material: durable aluminum alloy
- Motor dimensions: phi;27.5 x 30mm; Shaft diameter: phi;3.17mm
- Suitable for: RC helicopter, airplane, quadcopter and multi-copter
- KV: 2200rmp/V
- Max efficiency: 80%
- Max efficiency current: 4-10A ( gt;75%)
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- Number of Cells: 2-3 Li-Poly
- KV: 930/1000/1400/2200 according to your request
- Maximum current efficiency: 4-10A (> 75%)
- Current capacity: 12A / 60s
- No load current at 10V: 0.5
- Motor Dimensions: 27.5x30mm
- Shaft diameter: 3.17mm
- Weight: 47g
- Recommended propeller: 2 cells 7 * 3.5, 3 cells 6×3
Package Include:
- 1 x A2212 1000KV BLDC Brushless Motor
Best Online Shopping Website for A2212 1000KV BLDC Brushless Motor Quadcopter Motor in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Electronic Components, Students Corner
Regulator 7805 7812 7815
Voltage regulators are very common in electronic circuits.
They provide a constant output voltage for a varied input voltage.
The 78XX IC is an iconic regulator IC that finds its application in most of the projects. The name 78XX signifies two meaning, “78” means that it is a positive voltage regulator and “XX” means that it provides 5/6/9/12/15/24V as outputSKU: n/a -
Electronic Components, Students Corner
Regulator 7905 7912 7915
Voltage regulators are very common in electronic circuits.
They provide a constant output voltage for a varied input voltage.
The 78XX IC is an iconic regulator IC that finds its application in most of the projects. The name 78XX signifies two meaning, “78” means that it is a positive voltage regulator and “XX” means that it provides 5/6/9/12/15/24V as outputSKU: n/a -
Boards and Programmer, Students Corner
Raspberry Pi Zero WH (Wireless) With Pre-Soldered Header in Pakistan
Boards and Programmer, Students CornerRaspberry Pi Zero WH (Wireless) With Pre-Soldered Header in Pakistan
The Brand New Raspberry Pi Zero WH Wireless (with Pre-Soldered Header) is an ultra-low-cost and ultra-small variant of the original Raspberry Pi. It’s tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi-based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features onboard Wireless Internet & Bluetooth for all your connectivity needs!
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there’s plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, which you’ll need to solder your own headers too. With its small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!Unlike it’s larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There’s also no DSI screen port, no ethernet, no analog audio and no full-sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.It’s perfect for everyone who doesn’t own a soldering iron or who wants the soldering legwork done for them.What can you do with the Raspberry Pi Zero WH.!What can’t you do? Am I right?! The small size of the Zero W makes it perfect for projects with minimal wiggle-room. In such projects, some people have no need for GPIO pins — they simply solder directly to the board. However, there are many instances where you do want a header on your Zero W, for example in order to easily take advantage of the GPIO expander tool for Debian Stretch on a PC or MacSpecifications:
- Broadcom BCM2835 1GHz processor
- 512MB RAM
- Mini HDMI and USB On-The-Go port
- Micro USB power
- HAT-compatible 40-pin header
- Composite video and reset headers
- CSI camera connector
- 802.11b/g/n Wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Package Include-
- 1 x Raspberry Pi Zero WH (Wireless) With Pre-Soldered Header
Best Online Shopping Website for Raspberry Pi Zero in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
W1209 (Original) Digital Temperature Controller Thermostat Module in Pakistan
Sensor And Modules, Students CornerW1209 (Original) Digital Temperature Controller Thermostat Module in Pakistan
W1209 thermostat module has a temperature sensor, keys, LED display, relay and requires DC 12V power supply. It is an affordable, good quality thermostat controller. Thermostats are devices that sense the temperature of a system so that the temperature is maintained at the desired set point or near to it. NTC temperature sensor allows the module to intelligently control varied electrical devices based on the temperature. NTC thermistor has a negative temperature coefficient, which means the resistance decreases with increasing temperature. W1209 has an inbuilt embedded micro-controller, thus not much programming knowledge is required. The module consists of three switches to configure the various parameters including ON and OFF trigger temperatures. The relay can operate at voltages up to a maximum of 240V AC at 5A or 14V DC at 10A to power on. The temperature is displayed in degree centigrade and with the help of 7-segment display and the relay, the state is displayed with the help of the LED present on the W1209 module.Specifications:- Temperature Control Range: -50 ~ 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output,
- Capacity: 10A
Power Consumption:-
- Static Current: <=35mA
- Current: <=65mA
Environmental Requirements:-
- Temperature: -10 ~ 60 C
- Humidity: 20-85%
Dimensions:-- 48mm x 40mm x 14mm
Settings Chart:-- Long press the “SET” button to activate the menu.
- Code Description Range Default Value
- P0 Heat C/H C
- P1 Backlash Set 0.1-15 2
- P2 Upper Limit 110 110
- P3 Lower Limit -50 -50
- P4 Correction -7.0 ~ 7.0 0
- P5 Delay Start Time 0-10 mins 0
- P6 High-Temperature Alarm 0-110 OFF
- Long pressing +- will reset all values to their default
Package Include:- 1 x W1209 Digital Temperature Controller Thermostat Module
Best Online Shopping Website for W1209 Digital Temperature Controller Thermostat Module Incubator Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a - Temperature Control Range: -50 ~ 110 C
-
Boards and Programmer, Students Corner
Motor Driver L293D
This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.
The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.
Features of L293D Motor Driver Shield for Arduino:-
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
SKU: n/a - 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
-
Accessories, Students Corner
W1209 Module Transparent Acrylic Case Enclosure in Pakistan
This clear acrylic plastic case houses the W1209 digital temperature controller. It includes all assembly hardware. It is shipped unassembled, assembly is required. Assembled Dimensions (L x W x H): 59mm x 51mm x 18mm (2.3″ x 2.0″ x 0.71″).The case comes with protected film so that you can get it neat and clean without any scratch.Note: This product includes the case only. The W1209 temperature controller is shown in the photos for illustration purposes only.Specifications & Features:
- Good Quality Material
- Crystal Clear
- Weight: 25 gm
- Dimensions (LxWxH)mm: 59 x 51 x 18
Package Include:
- 1 x W1209 Module Transparent Acrylic Case Enclosure
Best Online Shopping Website for W1209 Module Transparent Acrylic Case Enclosure in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Boards and Programmer, Students Corner
Motor Driver L298N
L298N driver module, with ST L298N chip can directly drive two 3-30V DC motors, and provide 5V output interface, can circuit chip to 5V power supply, compatible with 3.3 VMCU control, You can easily control the speed and direction of the DC motor, you can also control the 2-phase stepper motor, essential for smart car.Product parameters:1 driver chip: L298N dual h-bridge driver chip
VMS supply area 2-terminal driver part: + 5V ~ + 35V
3 units of the maximum current Io: 2A / bridge
4 logic part of the terminal power range of Vss supply: 4.5-5 5V
5 logical parts of the operating current range: 0 ~ 36mA
6. Control signal input voltage range: 4.5-5.5V low 0V high
7 maximum power consumption: 20W
8 storage temperature: -25 ~ + 130
9 dimensions of controller board: 55mm x 60mm x 30mm
10 weight of controller board: 33g
11.Other features: control direction indicator, power indicator, current detection, logic part of the board to take the power interface.Package Included: Metal Melting Torch Mini Gold Furnace Graphite:SKU: n/a -
Motor and Robotics, Students Corner
TB6560 3A Stepper Motor Driver Module
Description
TB6560 is a very common and easy to use stepper motor driver for 4 wire stepper motor or hybrid stepper motor for cnc?applications.The current level is adjustable to meet your various application requirements; Automatic semi-flow adjustable; The use of high-speed optical coupling 6N137, ensuring high speed without losing step; The board printed setup instructions, no user manual can operate; Using thick fine-toothed radiator, good heat dissipation.
Specifications:
- Working voltage :DC 10V-35V.Recommend Switching Power Supply DC24V
- 6N137 high-speed OptoCoupler , to ensure a high speed without step out.
- New original Toshiba TB6560AHQ chip, low-voltage shutdown, of overheating parking and over-current protection circuit to ensure optimal performance.
- Rated output: ? 3A? ,peak 3.5A.
- For 42,57,86 Stepper within 3A? 2/4 -phase / 4 wire / 6 wire stepper motor, not fit for more than 3A stepper motor.
- Automatic half-decay.
- Excitation Mode: synchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.
- Volume: 50 x 75 x 35 ( MM)
Package Include:
- 1 x TB6560 3A Stepper Motor Driver Module
Best Online Shopping Website TB6560 3A Stepper Motor Driver Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a