Solar

Showing 1–15 of 20 resultsSorted by popularity

What solar and BMS components do I need for a DIY solar setup?

You need solar panels, a charge controller or inverter with MPPT, a lithium battery pack, and a BMS. The BMS is the safety core: it balances cells and cuts off charge or discharge when limits are crossed.

For a 12V or 24V pack, pick a 4S to 8S BMS. For 48V and above, go 8S to 24S. Match the continuous current to your inverter. A 60A BMS handles small systems, 100A suits 5kW inverters, and 200A covers 8kW to 10kW. All JK BMS here support Li-ion, LiFePO4 and LTO cells, and include Bluetooth, RS485, CAN and UART for inverter communication.

Which JK BMS is best for a 48V solar system?

For a 48V LiFePO4 pack, choose an 8S to 24S JK BMS. The 100A model is the common pick for 5kW inverters, and the 200A model suits 8kW to 10kW setups.

Two 100A options exist: the standard JK BMS 8S to 24S 0.6A Active Balancer 100A Smart Bluetooth BMS and the JK BMS 8S to 24S 0.6A Active Balancer 100A with PCR Pre-Charge. The PCR version adds a pre-charge resistor that stops inrush current when you connect the pack to an inverter with large capacitors. If your inverter manual warns about pre-charge, pick that one.

What is the difference between 0.4A, 0.6A and 1A active balancing?

The number is the balancing current. Higher current equalises cells faster, which matters more on large packs.

Active balancing transfers energy between cells. It wastes less power and produces less heat than passive balancing.

How do I choose the right current rating for my inverter?

Match the BMS continuous current to the highest current your inverter will pull from the battery. Add headroom for surge.

BMS currentTypical use
40ASmall e-bikes, scooters, low-current 48V storage
60ASmall solar storage, e-bikes, backup systems
100A5kW inverters on 48V packs
200A8kW to 10kW inverters, EV conversions, industrial backup

For heavy loads, see the JK BMS 8S to 24S 0.6A Active Balancer 200A Heavy Duty Smart BMS or the JK BMS 4S to 8S 1A Active Balancer 200A Heavy Duty Smart BMS.

How much does a JK BMS cost in Pakistan?

Prices range from Rs. 7,349 to Rs. 14,174, checked in September 2026. All models are in stock.

Delivery is nationwide across Pakistan at a flat rate of Rs. 350.

How do I set up and monitor a JK BMS?

Download the JK BMS app on Android or iOS, connect over Bluetooth 5.0, and set your cell count, chemistry and protection thresholds. The app shows live cell voltages, current and temperature.

For inverter pairing, use RS485, CAN or UART. Popular smart inverters from Deye, Growatt and Voltronic can read the BMS data directly. Dual NTC sensors are included on most models; place them on the cells or busbars. Set conservative limits first, test, then adjust. The aluminium heatsink housing handles heat during sustained current.

Frequently Asked Questions

Can I use a JK BMS with LiFePO4 cells?

Yes. All JK BMS models on this page support Li-ion, LiFePO4 and LTO chemistries. You set the chemistry and cell count in the JK BMS app. For a 48V LiFePO4 pack, use an 8S to 24S model. The BMS then applies the correct voltage limits for charging and discharging.

Does the JK BMS work with my Deye or Growatt inverter?

The BMS includes RS485, CAN and UART ports, which smart inverters from Deye, Growatt and Voltronic use to read battery data. Check your inverter's BMS protocol list and select the matching option in the JK BMS app. Bluetooth 5.0 is also available for phone monitoring.

What is the difference between the 100A and 100A PCR models?

Both handle 100A continuous and 0.6A active balancing. The PCR version adds a pre-charge resistor circuit. This limits the inrush current when you first connect the battery to an inverter with large input capacitors. It protects the BMS MOSFETs and the inverter from arcing or damage.

How many cells can a JK BMS manage?

Models on this page cover 4S to 8S and 8S to 24S. That means packs from 12V to 96V depending on chemistry. You configure the exact cell count in the app. The BMS then balances and protects each cell within the pack.

Do you deliver JK BMS across Pakistan?

Yes. College Road Electronics delivers nationwide across Pakistan at a flat rate of Rs. 350. All JK BMS models listed here are in stock. Students can also get guidance for project builds.

Showing 1–15 of 20 resultsSorted by popularity

A battery management system keeps your lithium pack safe and balanced. Without one, cells drift apart and the pack loses capacity fast. JK BMS units use active balancing, which moves energy between cells instead of burning it off as heat.

This page lists JK BMS models for solar storage, e-bikes and backup systems. They support 4S to 24S packs, Li-ion, LiFePO4 and LTO cells, and Bluetooth, RS485, CAN and UART for inverter pairing. Prices start at Rs. 7,349 and were checked in September 2026. All items are in stock.

Quick answer

Which JK BMS should I buy for solar storage?

For solar storage, match the JK BMS to your pack voltage and current. A 4S to 8S 100A unit suits 12V to 24V systems, while 8S to 24S models cover 24V to 96V. Choose 60A for small inverters, 100A for 5kW, and 200A for 8kW to 10kW. Prices start at Rs. 7,349, checked September 2026.

0
0
Your Cart
Your cart is emptyReturn to Shop
Continue Shopping