-14%

ZGB37RG 12V 200RPM High Torque DC Gear Motor

Availability:

In stock


  • ZGB37RG geared DC motor with integrated reduction gearbox
  • 12V DC rated, approximately 200RPM output speed
  • High torque geared output for robot drives and mechanisms
  • Runs forward and reverse by reversing motor polarity
  • Works with motor driver modules, Arduino and ESP32
  • Suits robot cars, 2WD and 4WD platforms and automation
WhatsAppChat on WhatsApp

₨ 2,850 ₨ 3,300

In stock

The ZGB37RG 12V 200RPM High Torque DC Gear Motor is a geared DC motor designed for robotics, automation, DIY mechanical projects, and other applications requiring controlled speed and higher output torque. Its integrated gearbox reduces the motor’s rotational speed while providing increased torque at the output shaft.

With a 12V DC operating voltage and approximately 200RPM output speed, this motor is suitable for robot vehicles, mobile platforms, automation mechanisms, and custom mechanical projects where a balance of speed and torque is required.

Key Features

  • ZGB37RG geared DC motor
  • 12V DC operating voltage
  • Approximately 200RPM output speed
  • High-torque geared output
  • Integrated reduction gearbox
  • Compact cylindrical design
  • Suitable for robotics and automation
  • Suitable for continuous rotational applications
  • Can be used with motor driver modules and controllers

Technical Specifications

  • Product Type: DC Gear Motor
  • Model: ZGB37RG
  • Rated Voltage: 12V DC
  • Output Speed: Approximately 200RPM
  • Gearbox: Integrated reduction gearbox
  • Motor Size: 37mm class
  • Output: Geared rotating shaft
  • Direction: Forward and reverse by reversing motor polarity
  • Application: Robotics, automation, DIY and mechanical projects

Note: Actual torque, current consumption, gearbox ratio, shaft dimensions, mounting dimensions, and other specifications may vary depending on the specific motor version and manufacturer.

Working Principle

The DC motor converts electrical energy into rotational motion. The integrated gearbox reduces the motor’s high-speed rotation and transfers it to the output shaft at a lower speed with increased mechanical torque.

The motor can rotate in either direction by reversing the polarity of the DC supply. When controlled using an Arduino, ESP32, or other microcontroller, a suitable motor driver should be used between the controller and motor.

Applications

  • Robot cars and mobile robots
  • 2WD and 4WD robotic platforms
  • DIY robotics projects
  • Automation systems
  • Motorized platforms
  • Small conveyor mechanisms
  • Educational robotics projects
  • Mechanical prototypes
  • Custom actuator systems
  • Automated equipment

Advantages

  • High-torque geared output
  • 200RPM output speed suitable for many robotic applications
  • 12V operation
  • Integrated gearbox simplifies mechanical installation
  • Suitable for forward and reverse operation
  • Useful for robotics and automation
  • Easy to control with a suitable motor driver

Usage Tips

  • Use a suitable 12V DC power source.
  • Always use an appropriate motor driver for microcontroller-based projects.
  • Do not connect the motor directly to an Arduino or ESP32 GPIO pin.
  • Avoid exceeding the rated voltage.
  • Provide proper mechanical support during installation.
  • Avoid prolonged operation under stall or excessive mechanical load.
  • Check shaft and mounting dimensions before installation.

Note: Images are for Illustration Purposes Only.

What comes with the ZGB37RG gear motor?

Each order is one ZGB37RG 12V 200RPM high torque DC gear motor, packed as a single unit. Here is what you get:

  • One ZGB37RG DC gear motor with integrated reduction gearbox
  • 12V DC rated motor, approximately 200RPM output speed
  • Geared output shaft, 37mm class motor body
  • Motor only. Wires, motor driver, wheels and couplers are not included

You will need a 12V DC supply and a suitable motor driver to run it from an Arduino or ESP32. If you are building a robot car, pair it with wheels and a driver from our Motors, Drivers and Wheels range. Message us on WhatsApp and we will help you match the motor to your chassis and driver.

Which motor should I pick for my robot or project?

Pick the ZGB37RG when you need steady wheel drive at around 200RPM on 12V with geared torque. Pick a servo when you need precise angular movement instead.

A quick guide:

  • Robot cars, 2WD and 4WD platforms, small conveyors: the ZGB37RG geared DC motor gives continuous rotation and higher torque through its gearbox.
  • Steering, camera pans, grippers and arms: a hobby servo holds a set angle. The SG90 9g Micro Servo Motor suits light linkages, and the MG90S Metal Gear Servo Motor handles a bit more load with metal gears.
  • Microcontroller control: always run the gear motor through a motor driver, never straight from a GPIO pin.

Not sure which fits your build? Send us your chassis size, wheel type and power supply on WhatsApp and we will confirm the right option and its price.

Frequently Asked Questions

How do I control the ZGB37RG motor with an Arduino or ESP32?

Use a motor driver module between the board and the motor. The Arduino or ESP32 sends the control signal, and the driver supplies the 12V and current the motor needs. Reversing the polarity at the driver output reverses the motor direction. Never connect the motor directly to a GPIO pin, as it cannot supply the required current.

Can I run the ZGB37RG motor forward and reverse?

Yes. The motor rotates in either direction when you reverse the polarity of the DC supply. In practice you do this through a motor driver, such as an H-bridge module, controlled from your Arduino or ESP32. That makes it suitable for robot cars that need to move forward, backward and turn.

What power supply does this 12V gear motor need?

It runs on a 12V DC supply. Choose a supply that can deliver the current your motor draws under load, and avoid exceeding the rated voltage. For battery-powered robots, a 12V pack works well. If you tell us your project and load, we can help you pick a matching supply and driver from our stock.

Do you deliver the ZGB37RG motor across Pakistan?

Yes. We deliver nationwide across Pakistan at a flat-rate shipping charge of Rs 350. The motor is in stock at Rs. 2,850. Students building school, college or university projects can also ask us for guidance on wiring and drivers. Message us on WhatsApp to confirm current prices and delivery details for your city.

What is the difference between this gear motor and a servo motor?

The ZGB37RG is a DC gear motor that spins continuously at around 200RPM on 12V, so it suits wheels and drive mechanisms. A servo like the SG90 or MG90S moves to a set angle and holds it, which suits steering, arms and camera mounts. Many robot builds use both types together.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop