Power Tools

Which power tools are worth buying for a student electronics workshop?

For most student electronics workshops, a rotary hammer and an angle grinder cover the core needs. Add a stand if you do frequent cutting.

The WADFOW Rotary hammer SDS-PLUS 800W (WRH1D26) handles drilling into concrete, wood and steel. It has an 800W motor, 2.5J impact energy and a maximum drilling capacity of 26mm in concrete. It comes with three drill bits, two chisels and a BMC case.

The TG10910056 Angle grinder 900W 4Inch is for cutting and grinding metal, masonry and stone. Its 900W motor spins at 12,000 rpm and takes 100mm discs. An auxiliary handle is included.

If you need precise, repeatable cuts, the WASC1251 Angle grinder stand For 100-125mm Angle Grinder holds your grinder at a fixed angle. It fits 100-125mm grinders and has a cast iron base for stability.

What can I do with a rotary hammer that I cannot do with a regular drill?

A rotary hammer adds hammer action, so it drills into concrete and masonry far faster than a regular drill. It also chisels.

The WADFOW WRH1D26 delivers 2.5J of impact energy at up to 4000 bpm. That makes it suitable for fixing shelves, mounting equipment and light demolition. It has a variable speed trigger (0-1100 rpm) for controlled starts. The SDS-PLUS chuck lets you change bits quickly without tools.

Use it for concrete up to 26mm, steel up to 13mm and wood up to 30mm. For electronics work, it is handy when you need to mount enclosures or run cables through walls.

Is an angle grinder necessary for electronics projects?

Not always, but it is useful for cutting metal chassis, trimming enclosures and cleaning up welds. It saves time on fabrication tasks.

The TG10910056 angle grinder runs on 220-240V and draws 900W. Its no-load speed of 12,000 rpm makes quick work of metal and stone. The 100mm disc size is compact enough for tight spaces. It uses an M10 spindle thread, so common wheels fit.

If you mostly work with small parts, a rotary tool may be enough. But for heavier cutting, an angle grinder is the better choice.

How do I choose between these three power tools?

Match the tool to the job you do most. Drilling and chiseling: rotary hammer. Cutting and grinding: angle grinder. Precise cuts: add the stand.

All three are in stock. Prices were checked in October 2026.

What safety gear should I use with power tools?

Always wear safety glasses, hearing protection and a dust mask. Secure your workpiece before cutting or drilling.

• Safety glasses: protect against flying debris.
• Ear defenders: angle grinders and rotary hammers are loud.
• Dust mask: concrete and masonry dust is harmful.
• Gloves: improve grip, but keep them away from rotating parts.
• Clamps: hold your work steady so both hands stay on the tool.

Check the tool and cable before each use. Never remove guards.

Where can I buy power tools in Pakistan for student projects?

College Road Electronics supplies power tools to students, hobbyists and engineers across Pakistan. We deliver nationwide with flat-rate shipping of Rs. 350.

Our shop is on College Road, Rawalpindi. You can also browse our full Tech Tools and Instruments range online. If you are building a project and need advice, contact us. We help with part selection and guidance.

For battery-powered tools, see our guide on 1-Cell & 2-Cell Type-C Lithium Battery Chargers: Fast, Portable Power for Robotics & DIY.

Frequently Asked Questions

What is the price of the WADFOW rotary hammer?

The WADFOW Rotary hammer SDS-PLUS 800W (WRH1D26) is priced at Rs. 14,000. This price was checked in October 2026. It includes three drill bits, two chisels and a BMC case. The tool is in stock and available for nationwide delivery.

Does the angle grinder come with a disc?

The TG10910056 Angle grinder 900W 4Inch includes one auxiliary handle. A cutting or grinding disc is not listed in the product details. You can buy discs separately. The grinder uses a standard M10 spindle thread, so common 100mm discs fit.

Can I use the angle grinder stand with any grinder?

The WASC1251 stand is designed for 100-125mm angle grinders. It has an adjustable clamping angle from 0 to 45 degrees and a work table size of 190 x 235 mm. It will not fit larger grinders. Check your grinder's disc size before buying.

Do you deliver power tools across Pakistan?

Yes, we deliver nationwide across Pakistan. Shipping is a flat rate of Rs. 350. Orders are dispatched from our shop on College Road, Rawalpindi. You can also visit us in person to see the tools before buying.

Are these power tools suitable for beginners?

Yes, they are suitable for beginners who follow safety rules. The rotary hammer has a variable speed trigger for controlled drilling. The angle grinder includes an auxiliary handle for better grip. Always wear safety glasses and secure your workpiece. Our team can give you basic guidance.