-16%

JGB37-520 12V 333RPM High Torque DC Gear Motor

Availability:

In stock


  • JGB37-520 geared DC motor with integrated reduction gearbox
  • Rated 12V DC with approximately 333RPM output speed
  • Higher torque than a bare DC motor at the geared shaft
  • Forward and reverse by reversing motor polarity
  • Suits robot cars, 4WD and tracked robots, conveyors and prototypes
  • Drive it with a motor driver from Arduino, ESP32 or similar
WhatsAppChat on WhatsApp

₨ 1,350 ₨ 1,600

In stock

The JGB37-520 12V 333RPM High Torque DC Gear Motor is a geared DC motor designed for robotics, automation, mobile platforms, and other applications requiring controlled speed with higher torque. The integrated gearbox reduces the motor’s high-speed rotation to provide a slower output speed with increased mechanical torque.

With a rated voltage of 12V and an output speed of approximately 333RPM, this motor is suitable for robot cars, DIY mechanical projects, automation systems, and other applications where reliable geared motion is required.

Key Features

  • JGB37-520 geared DC motor
  • 12V operating voltage
  • Approximately 333RPM output speed
  • High-torque geared output
  • Integrated reduction gearbox
  • Compact cylindrical motor design
  • Suitable for robotics and automation
  • Easy to integrate into custom mechanical projects
  • Suitable for continuous rotational applications

Technical Specifications

  • Motor Type: DC Gear Motor
  • Model: JGB37-520
  • Rated Voltage: 12V DC
  • Output Speed: Approximately 333RPM
  • Gearbox: Integrated reduction gearbox
  • Motor Diameter: Approximately 37mm class
  • Output: Geared rotating shaft
  • Direction: Forward and reverse by changing motor polarity
  • Application: Robotics, automation, DIY and mechanical projects

Note: Actual torque, no-load current, stall current, gearbox ratio, shaft dimensions, and other mechanical specifications can vary according to the specific motor version and manufacturer.

Working Principle

The motor converts electrical energy into rotational motion. The internal gearbox reduces the motor’s high rotational speed and increases the available output torque at the geared shaft.

The motor can be driven in either direction by reversing the polarity of the DC supply. A suitable motor driver should be used when controlling the motor with an Arduino, ESP32, or other microcontroller.

Applications

  • Robot cars and mobile robots
  • 4WD and tracked robots
  • DIY robotics projects
  • Automated mechanical systems
  • Conveyor mechanisms
  • Small machinery
  • Motorized platforms
  • Educational projects
  • Automation prototypes
  • Custom actuator systems

Advantages

  • High torque compared with a bare DC motor
  • Controlled 333RPM geared output
  • 12V operation suitable for many robotics power systems
  • Integrated gearbox simplifies mechanical design
  • Suitable for forward and reverse operation
  • Useful for robotics and automation applications
  • Easy to control using a suitable motor driver

Usage Tips

  • Use a suitable 12V DC power supply or battery.
  • Use a proper motor driver rather than connecting the motor directly to a microcontroller GPIO.
  • Avoid exceeding the motor’s rated voltage.
  • Provide adequate mechanical support for the motor and gearbox.
  • Avoid continuous operation under stall or excessive mechanical load.
  • Check the shaft dimensions and mounting arrangement before installation.

Note: Images are for Illustration Purposes Only.

What comes with the JGB37-520 gear motor?

You get the JGB37-520 12V 333RPM gear motor itself, with the reduction gearbox already fitted and the geared output shaft ready to couple to your wheel, pulley or mechanism. Nothing else is needed to make it turn, but you will need a supply and a driver from your own parts box.

  • One JGB37-520 12V DC gear motor with integrated reduction gearbox
  • Geared output shaft, forward and reverse by reversing polarity
  • Approximately 37mm class cylindrical motor body
  • No power supply, battery or motor driver included
  • No mounting bracket, screws or coupler included
  • No wires or connectors included

Pair it with an L298N Motor Driver Module Dual H-Bridge 3A and a 12V pack, and it is ready for a robot car or a small conveyor. If you are still choosing between geared DC motors and hobby servos for a joint or steering link, our Motors, Drivers and Wheels range covers both.

How do I wire and control this motor with Arduino or ESP32?

Connect the motor to a motor driver, power the driver from a 12V supply, and control the driver from your Arduino or ESP32 pins. Never wire the motor straight to a GPIO pin.

  1. Fix the motor firmly to your chassis or frame so the gearbox is not carrying the load.
  2. Connect the two motor terminals to one channel of the driver.
  3. Feed the driver from a suitable 12V DC supply or battery, with the grounds shared with your board.
  4. Use two direction pins and one PWM pin to set forward, reverse and speed.
  5. Test at low duty cycle first, then increase once the mechanism moves freely.

Reversing the polarity at the motor terminals reverses rotation, so you can also swap direction in hardware. Our guide on how to wire and control the JGB37-520 DC gear motor walks through the connections in more detail. For lighter jobs such as a sensor pan or a small gripper, an SG90 9g Micro Servo Motor (180 Degree Rotation) or the stronger MG90S Metal Gear Servo Motor (180 Degree Rotation) may suit better than a continuously rotating gear motor.

Frequently Asked Questions

What can I build with a 333RPM geared DC motor?

At around 333RPM the output is quick but still geared, so it suits robot cars, 4WD and tracked platforms, small conveyors, motorized turntables and automation prototypes. It is a continuous rotation motor, not a positional servo, so use it where you need steady spinning rather than a set angle. Pair it with a driver and a 12V pack.

Can I run this motor from a 12V battery?

Yes, the motor is rated at 12V DC, so a 12V battery pack or a 12V adapter works as the supply. Feed the battery through a motor driver rather than straight to the motor if you want speed and direction control from a microcontroller. Keep the voltage at the rated level and avoid running it stalled under heavy load.

Do you deliver the JGB37-520 motor across Pakistan?

Yes. We are a shop on College Road, Rawalpindi, and we deliver nationwide across Pakistan at a flat-rate shipping charge of Rs 350. Students can also visit us for parts and guidance on their school, college or university projects. Message us with your city and project details and we will confirm current price and availability.

How do I choose between this gear motor and a servo motor?

Choose the JGB37-520 when you need continuous rotation with higher torque, such as driving wheels or a belt. Choose a servo when you need a specific angle, like steering, a gripper or a camera mount. Many student robots use both: gear motors for the drive and small servos for the moving parts.

What should I check before fitting the motor to my robot?

Check the shaft dimensions and the mounting arrangement against your wheel hub or coupler, and support the motor body so the gearbox does not take the load. Keep the load light enough that the motor does not stall, and use a driver rated for the current. WhatsApp us your chassis details and we will help you match the parts.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop