- Boards, Modules and Accessories
1x 18650 Battery Case Single Cell Holder
– Secure connection keeps a single 18650 battery safe and reliable
– Ideal for DIY projects like power banks, flashlights, and robotics
– Affordable, value-for-money 18650 battery holder
– Versatile use in electronics projects and home automation
– Easy to install with standard mounting holes
– Durable construction for repeated useSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
PCF8574 16 Pin I2C LCD Display Module
– Connect 16×2 or 20×4 character LCDs using only four pins (VCC, GND, SDA, SCL)
– Reduces wiring and saves up to 6 GPIO pins compared to parallel LCD wiring
– Built-in PCF8574 I/O expander for stable I2C communication
– Adjustable contrast via onboard potentiometer and software-controlled backlight
– Compact, plug-and-play design that fits behind the LCD
– Compatible with Arduino, Raspberry Pi, ESP32 and major development boardsSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Mini Submersible DC Water Pump 3-5V
– Compact submersible DC pump operating at 3–5V for low-power projects
– Quiet operation—ideal for aquariums, fountains, and desktops
– Compatible with USB power, batteries, and Arduino controllers
– Lightweight and compact design fits tight spaces and DIY builds
– Durable construction for continuous low-power circulation
– Easy to install and energy-efficient for portable systemsSKU: n/a - Integrated Circuits (ICs)
CD4017 Decade Counter IC (DIP)
– 5-stage Johnson decade counter with 10 decoded outputs (Q0–Q9)
– Ideal for LED chasers, light sequencers and timing circuits
– Wide supply voltage: 3V to 15V for TTL and CMOS compatibility
– Includes clock inhibit, reset and carry-out for cascading
– Standard DIP package for easy breadboard prototyping
– Low power consumption with high noise immunitySKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Joystick Module Dual Axis XY Analog Module
– Dual-axis joystick for precise X and Y control
– Easy integration with Arduino and common microcontrollers
– Analog potentiometer outputs for smooth, real-time input
– Compact, durable design for long-term use
– Ideal for robotics, RC vehicles, gaming and interactive DIY projects
– Affordable solution for hobbyists, students and makersSKU: n/a - Accessories
GL12 840 Tie Points Solderless Breadboard
- 840 tie points solderless breadboard for quick circuit prototyping without soldering
- Full-size design with 640 main tie points and 200 power rail connections
- Standard 2.54mm pitch compatible with most electronic components and ICs
- Dual power rails for organized VCC and GND distribution
- Reusable, durable design with self-adhesive backing for easy mounting
- Ideal for Arduino, ESP32, Raspberry Pi projects and educational electronics
SKU: n/a - Jumper Wires and JST Connectors etc.
2-Pin JST SM Connector Wire Cable Pair (2.54mm Pitch)
– 2-Pin JST SM male and female connector pair for quick connections.
– Standard 2.54mm pitch for broad compatibility with PCBs and modules.
– Pre-attached red (positive) and black (negative) wires for easy wiring.
– Secure locking design prevents accidental disconnections.
– Wire length approximately 15 to 20 cm per side for flexible placement.
– Durable plastic housing and reliable pin alignment for long-lasting use.SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TCRT5000 IR Reflective Sensor Photoelectric Switch
Boards, Modules and Accessories, Sensors And ModulesTCRT5000 IR Reflective Sensor Photoelectric Switch
- Compact IR reflective photoelectric sensor in a 4-pin package
- Built-in IR LED and phototransistor for reliable short-range detection
- Detects object presence and surface contrast (black/white) for line following
- Typical detection distance up to 15 mm depending on surface
- Low power consumption and high sensitivity for robotics and automation
- Ideal for hobbyists, students, and embedded systems projects
SKU: n/a - Accessories
BC557 PNP Transistor (45V 0.1A)
- General-purpose PNP bipolar junction transistor for low-power circuits
- Maximum collector-emitter voltage: 45V
- Maximum collector current: 100mA (0.1A)
- Low-noise performance and high DC current gain (hFE 110–800)
- Power dissipation: 500mW in TO-92 package
- Ideal for switching, signal processing, and small-signal amplification
SKU: n/a - Resistors, Capacitors, Inductors etc.
103 10nF 10,000pF 0.01μF Non-Polar Ceramic Capacitor
- Capacitance Value: 10,000pF (10nF / 0.01μF) with 103 marking code
- Non-Polarized Design: Can be connected in any orientation for easy installation
- Stable Ceramic Dielectric: Reliable performance across wide range of applications
- Compact Through-Hole Package: Perfect for PCB mounting and breadboard use
- Ideal for High-Frequency Applications: RF circuits, oscillators, and signal coupling
- Low Leakage Current: Suitable for timing circuits, noise filtering, and decoupling
SKU: n/a - Boards, Modules and Accessories, Accessories
Small Dotted Veroboard (6.4cm x 14.5cm)
- Compact 6.4cm x 14.5cm dotted veroboard for small projects
- Pre-perforated copper tracks for easy soldering and reliable connections
- Perfect for DIY electronics, Arduino projects, and circuit prototyping
- Simple to use—ideal for hobbyists, students, and engineers
- Durable construction suitable for repeated soldering and adjustments
- Great for LED circuits, sensors, motor control, and rapid prototyping
SKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.0mm Pitch (4-Pin)
- JST PH 4-Pin Female Connector with 2.0mm pitch for multi-signal and power connections
- 15cm cable length ideal for compact robotics, drones, and embedded systems
- Plug-and-play design with no soldering required on connector side
- Compatible with JST PH male headers on Arduino, ESP32, and PCB modules
- Secure locking mechanism prevents accidental disconnection during operation
- Flexible insulated wires rated up to 2A per line for low-voltage DC applications
SKU: n/a - Boards, Modules and Accessories, Boards and Programmers
ESP32 S3 44Pin Terminal Adapter Expansion Breakout Module
Boards, Modules and Accessories, Boards and ProgrammersESP32 S3 44Pin Terminal Adapter Expansion Breakout Module
– Breaks out all 44 ESP32-S3 pins into labeled screw terminals
– Secure, solderless connections for sensors, actuators, and modules
– Clearly labeled GPIO, power (3.3V/5V), and GND connections
– Compact, durable PCB design for prototyping and permanent installations
– Ideal for IoT, home automation, robotics, and industrial projects
– Enables rapid wiring, easy maintenance, and quick module swapsSKU: n/a - Jumper Wires and JST Connectors etc.
10cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
- 10cm male-to-female jumper wires with pre-crimped pin and socket ends
- Available in 20pcs and 40pcs sets
- Fits standard 2.54mm header pins and breadboards
- No soldering needed for standard pin-header connections
- Multiple colours for easy circuit identification
- For Arduino, ESP32, Raspberry Pi, sensors and robotics
SKU: n/a - Accessories
Slow-Blow Glass Cartridge Fuse 0.5A/3.15A
– Rated current: 3.15A for medium-power circuits
– Slow-blow (time-delay) design tolerates brief inrush currents
– Clear glass cartridge for quick visual inspection
– Metal end caps ensure secure, reliable connections
– Fits standard fuse holders and inline clips
– Ideal for power supplies, adapters, audio gear, and DIY electronicsSKU: n/a - Intermediate Electronics Kits
2WD Aluminum Alloy Smart Robotic Car Chassis (UnAssembled)
– Strong, rust-resistant aluminum alloy 2WD chassis for durability and light weight
– Includes 2 DC geared motors and solid rubber wheels for reliable motion
– Precision-cut frame with multiple mounting holes for sensors and controllers
– Compatible with Arduino, Raspberry Pi, ESP32, motor drivers and modules
– Easy to assemble — ideal for students, hobbyists, and developers building smart robots
– Perfect for line-following, obstacle avoidance, Bluetooth/Wi-Fi control, and AI projectsSKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
5A XL4015 Step-Down Buck Converter Module 4-38V to 0.8-30V
Boards, Modules and Accessories, Buck, Boost Converters and Regulators5A XL4015 Step-Down Buck Converter Module 4-38V to 0.8-30V
– High current output up to 5A for demanding loads
– Wide input range: 4V to 38V DC
– Adjustable output: 0.8V to 30V via potentiometer
– Up to 96% conversion efficiency to minimize heat
– Built-in overcurrent and thermal protection for safety
– Compact, durable design with integrated heat sinkSKU: n/a - Intermediate Electronics Kits
2WD Acrylic Robot Car Chassis
– Compact 2WD robot car chassis ideal for beginners and hobbyists
– Durable transparent acrylic base plate for secure mounting
– Includes two DC geared motors, two wheels and a caster wheel
– Universal compatibility with Arduino, Raspberry Pi and motor drivers
– Easy assembly with nuts, screws and motor mounts included
– Great starter platform for line following, obstacle avoidance and STEM projectsSKU: n/a - Boards, Modules and Accessories, Accessories
140PCS Solderless Breadboard Jumper Cable Wire Kit
– 140PCS jumper wire kit with assorted lengths and colors
– Solid-core copper construction for reliable conductivity
– Pre-cut, pre-stripped and pre-bent ends for instant use
– Perfect fit for solderless breadboards and female headers
– Color-coded wires for easy identification and tidy wiring
– Reusable and ideal for Arduino, Raspberry Pi, robotics, and DIY prototypingSKU: n/a - Accessories, Boards, Modules and Accessories
HW-131 Breadboard Power Supply Module 3.3V/5V
– Selectable 3.3V and 5V outputs
– Fits standard breadboards (MB102 style)
– USB or barrel jack input options
– Up to 700mA output current
– Simple jumper switch for quick selection
– Compact, lightweight for prototypingSKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















