15cm JST Female Connector Cable 2.0mm Pitch (4-Pin)

15cm JST Female Connector Cable 2.0mm Pitch (4-Pin) – Plug-and-Play Wiring Solution

The 15cm JST Female Connector Cable (4-Pin, 2.0mm Pitch) is a compact and ready-to-use wire harness solution designed for reliable power and multi-signal connections in electronics, robotics, drones, Arduino/ESP32 projects, LED modules, and sensor systems. It uses the standard JST PH 2.0mm 4-pin female connector, which is widely used in compact embedded and low-voltage electronic applications.

This cable is ideal for VCC, GND, and multiple signal lines where a clean plug-and-play connection is required without soldering on the connector side.

Key Features of 4-Pin JST Female Connector Cable

• 4-Pin JST PH Female Connector: Supports multi-channel signal and power connections
• 2.0mm Pitch Standard: Compatible with JST PH male headers on PCBs
• 15cm Cable Length: Ideal for compact wiring in robotics and embedded systems
• Plug-and-Play Design: No soldering required on connector side
• Flexible Insulated Wires: Easy routing in tight spaces and enclosures
• Secure Locking Mechanism: Prevents accidental disconnection during operation
• Widely Used Standard: Common in drones, sensors, and IoT devices

Technical Specifications

• Product Type: JST Pre-Wired Female Connector Cable
• Connector Type: JST PH Female
• Pin Count: 4 Pin
• Pitch: 2.0mm (JST PH Series)
• Cable Length: 15cm
• Wire Type: Stranded copper wire with PVC insulation
• Typical Wire Gauge: ~22-26 AWG (varies by manufacturer)
• Current Rating: Up to ~2A per line (typical JST PH specification)
• Voltage Rating: Low-voltage DC applications (commonly up to ~100V depending on system design)
• Color Coding: Usually multi-color (red, black, yellow, green or similar)
• Operating Temperature: approx. -25°C to +85°C

How JST Female Connector Cable Works

This cable works as a direct wire-to-board interface system:

• The JST PH 4-pin female connector plugs into a matching 2.0mm male header on a PCB
• Each pin carries an independent electrical path (power or signal)
• The keyed structure ensures correct alignment and prevents reverse insertion
• Flexible wires transmit signals or DC power between modules and controllers

Applications of 4-Pin JST Connector Cable

• Arduino and ESP32 development boards
• Robotics and automation systems
• Drone and RC electronics
• Sensor modules (IR, ultrasonic, temperature, etc.)
• LED strips and display modules
• Motor driver and control circuits
• IoT and embedded systems

Advantages of JST PH Female Connector

• Fast plug-and-play connectivity
• Clean and organized wiring setup
• Reduces soldering effort in prototyping
• Compact design suitable for small devices
• Secure locking prevents loose connections
• Highly compatible standard connector system

Usage Tips

• Always match with JST PH 2.0mm 4-pin male header
• Verify pin mapping before powering the circuit
• Do not force insertion – align properly first
• Use strain relief in moving or vibration-heavy setups
• Keep within low-voltage DC applications only

Note: Images are for illustration purposes only.