- Accessories, Boards, Modules and Accessories
USB to Type-C Charging Data Cable
– Durable USB to Type-C Charging Cable for reliable power and data transfer
– Supports fast charging for compatible devices
– Reinforced connectors for a secure, long-lasting fit
– Stable data transfer for syncing files and media
– Lightweight, compact, and easy to carry
– Compatible with smartphones, tablets, power banks, cameras and other USB Type-C devicesSKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.54mm (5-Pin) (Straight / Right Angle)
– JST Male Connector with 2.54mm pitch for standard PCB headers
– 5-pin configuration supports multiple signal or low-power lines
– Available in straight (vertical) and right-angle (horizontal) orientations
– Durable metal contacts and high-quality plastic housing for reliable conductivity
– Compact form factor ideal for Arduino, robotics, drones, RC models, and sensors
– Easy to solder or crimp into PCB headers, wiring harnesses, and prototyping boardsSKU: n/a - Boards, Modules and Accessories, Accessories
ESP32-CAM-MB Micro USB Programmer CH340G Board
- Compact ESP32-CAM-MB board with built-in OV2640 2MP camera
- Onboard MicroSD slot for local image and video storage (up to 4GB)
- WiFi and Bluetooth connectivity for remote IoT and surveillance projects
- Multiple GPIO pins (ADC, PWM, I2C, SPI) for sensors and peripherals
- High-brightness LED flash and wide 5V operating voltage
- Compatible with Arduino IDE and ESP-IDF for fast development
SKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
30A Electronic Speed Controller ESC for Brushless Motors
Boards, Modules and Accessories, RC Drones and Accessories30A Electronic Speed Controller ESC for Brushless Motors
- 30A continuous current for high-power brushless motors
- Accurate speed regulation for smooth acceleration and deceleration
- Programmable throttle, braking and performance parameters
- Built-in overheat protection and thermal management
- Durable construction for reliable operation in demanding use
- Wide compatibility with many brushless motor types
SKU: n/a - Accessories
433MHz Antenna for LoRa Ra-02 Module
– Optimized for the 433 MHz ISM band specially for LoRa RA-02 modules
– Extends transmission and reception range over PCB or onboard antennas
– High efficiency design with low signal loss and stable radiation pattern
– Compact, lightweight and easy to integrate into small enclosures
– Plug-and-play compatibility with RA-02 antenna interface
– Durable RF conductor with insulated coating, typically black finishSKU: n/a - Accessories
Mini Round Shape Speaker 8Ω 1W
- Compact 8Ω, 1W speaker delivers clear audio for low-power projects
- Small round form factor fits into tight spaces and portable builds
- Lightweight and easy to mount — ideal for prototypes and enclosures
- Compatible with Arduino, Raspberry Pi, ESP and other microcontrollers
- Perfect for toys, alarms, voice modules and sound-effect projects
- Reliable performance for notification and voice-output applications
SKU: n/a - Sensors And Modules
MAX98357 I2S 3W Class-D Audio Amplifier Module
- MAX98357A I2S digital Class-D amplifier for direct digital audio playback
- Up to 3W output power into 4Ω speakers
- Direct I2S input, no external DAC required
- Works with ESP32, Raspberry Pi, Arduino (I2S) and other microcontrollers
- Built-in selectable gain options (3dB to 18dB)
- High efficiency with low distortion and low noise
- Integrated short-circuit and thermal protection, 2.5V to 5.5V supply
SKU: n/a - Batteries, Cells and Power Supply
3.7V 21700 3000mah Rechargeable Cell (11.1Wh)
– High-capacity 3000mAh lithium-ion cell for extended run time
– Nominal voltage 3.7V with 11.1Wh energy output
– Standard 21700 form factor (21mm × 70mm), lightweight (~70g)
– Rechargeable with 500+ cycle life under typical use
– Suitable for flashlights, power banks, e-bikes, RC and DIY battery packs
– Safe when used with proper charger and following lithium-ion precautionsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
SX1278 433MHz LoRa Ra-02 Wireless Module
- LoRa long-range, low-power wireless communication for IoT devices.
- Operates on the 433MHz frequency band for extended range and penetration.
- High sensitivity up to -148dBm for reliable long-distance data links.
- Compact, lightweight design with SPI interface for easy MCU integration.
- Low current consumption, ideal for battery-powered sensors and trackers.
- Supports secure data transmission with built-in encryption capabilities.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-008 5V 650nm Laser Light Sensor Module
– Compact KY-008 laser emitter designed for Arduino and microcontroller projects
– Visible red laser at 650nm for precise beam targeting
– Operates on 5V DC with low current draw (under 40mA)
– Simple 3-pin hookup: VCC, GND, Signal for easy integration
– Small form factor (18.5mm x 15mm) ideal for compact designs
– Suitable for alarms, line-following robots, motion detection, and DIY projectsSKU: n/a - Batteries, Cells and Power Supply
Power Plus Premium Gold AA Battery Cell 1.5V
– High-performance 1.5V AA alkaline battery for reliable power
– Premium Gold series engineered for extra-long life and durability
– Leak-resistant design with stable voltage output
– Ideal for both high-drain and everyday devices
– Up to 5 years shelf life when stored properly
– Suitable for Arduino, toys, remotes, clocks, and sensorsSKU: n/a - Boards, Modules and Accessories
65mm Yellow Rubber Wheel for Robotic Car
- Durable yellow rubber wheel designed for robotic cars
- 65mm outer diameter — ideal for common robot platforms
- Strong rubber tread for improved traction on multiple surfaces
- Easy to install for DIY projects, STEM kits, and replacements
- Bright yellow color for better visibility and orientation
- Built to resist cracking and wear for long-lasting performance
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V Digital Output LED Traffic Light Module
– Energy-efficient LED technology reduces power consumption and operating costs.
– Durable, weather-resistant construction for reliable performance in all climates.
– Bright, high-visibility multi-color LEDs for clear signaling day and night.
– Modular design enables quick installation and easy integration with existing systems.
– Customizable programming and signal timing to meet diverse traffic control needs.
– Long lifespan and low maintenance for cost-effective traffic management.
– Ideal for smart cities, pedestrian crossings, highways, industrial sites, and warehouses.SKU: n/a - Motors, Drivers and Wheels
N20 Mini DC Encoder Motor 6V (310/530 RPM) (Brand New)
- Compact N20 mini DC gear motor with built-in magnetic encoder for precise speed and position feedback
- Available in 310 RPM and 530 RPM variants at 6V DC operating voltage
- Metal gearbox construction delivers high torque output and improved durability
- Hall-effect encoder provides 14 counts per motor revolution for accurate motion control
- Perfect for line-following robots, balancing robots, smart vehicles, robotic arms, and automation systems
- D-type shaft (3mm diameter) with compact dimensions: 12mm diameter, 30-31mm length
SKU: n/a - Resistors, Capacitors, Inductors etc.
1μF 350V Electrolytic Polarized Capacitor
– 1µF capacitance for coupling, filtering, and timing circuits
– 350V DC rating for high-voltage applications
– Polarized electrolytic design for efficient energy storage
– Radial lead package for easy through-hole mounting
– Durable construction for industrial and professional use
– Ideal for power supplies, SMPS, audio, inverters, and repairsSKU: n/a - Integrated Circuits (ICs)
7485 4-Bit Magnitude Comparator IC (DIP)
– Compares two 4-bit binary numbers (A and B)
– Outputs A B logic signals
– TTL-compatible logic levels for reliable operation
– Cascadable design for comparisons of larger bit-widths
– DIP package ideal for breadboards and prototyping
– Suitable for sorting, ALU functions, and decision circuitsSKU: n/a - Boards, Modules and Accessories
CA1235 Adjustable Step Down Buck Converter Module
- Adjustable output voltage from 1.25 V to 30 V for precise tuning
- Delivers up to 3 A output with over 90% efficiency
- CA1235 converter chip for smooth, near-silent regulation
- Compact buck converter module smaller than a business card
- Rugged power module circuit with PCB-mounted aluminum heat sink
- Built-in over-current and thermal protection for safe operation
SKU: n/a - Boards, Modules and Accessories, Accessories
5V 2A Power Supply AC/DC Adapter
- Stable 5V DC output at 2A for reliable device operation
- Compatible with Raspberry Pi, Arduino, LED strips, and other small electronics
- Compact, lightweight design ideal for home, office, and travel
- Built-in safety: over-voltage, over-current, and short-circuit protection
- Energy-efficient design to minimize power loss and reduce consumption
- Standard wall plug compatible with most outlets
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.0mm (2-Pin) (Straight)
- JST PH 2.0mm 2-pin male connector for wire-to-board PCB connections
- Available in straight mounting orientations
- Compact 2.0mm pitch design ideal for drones, robotics, and battery systems
- Secure keyed locking mechanism ensures proper polarity and reliable connection
- Through-hole mounting with tin-plated copper pins and nylon housing
- Rated for up to 2A current and 100V DC, operating temperature -25°C to +85°C
- Perfect for Arduino, ESP32, sensors, and embedded electronics projects
SKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















