- Batteries, Cells and Power Supply, Boards, Modules and Accessories, RC Drones and Accessories
IMAX RC B3 Pro Compact LiPo Battery Balance Charger
Batteries, Cells and Power Supply, Boards, Modules and Accessories, RC Drones and AccessoriesIMAX RC B3 Pro Compact LiPo Battery Balance Charger
– Compact LiPo balance charger for 2S (7.4V) and 3S (11.1V) battery packs
– Built-in cell balancing to extend battery life and prevent cell damage
– LED indicators for easy, real-time charge status monitoring
– Plug-and-play operation with no complicated setup required
– Lightweight, portable design ideal for field charging and travel
– Safe and reliable charging with protection against overcharge and imbalanceSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TTP223 Capacitive Touch Sensor Module
- High-sensitivity capacitive touch detection using TTP223 sensor.
- Wide voltage range: 3.3V to 5V, compatible with Arduino and other microcontrollers.
- Digital output: simple VCC, GND, OUT pinout for fast integration.
- Low power consumption, ideal for battery-powered projects.
- Compact low-profile board (approx. 24 x 18 x 3 mm) fits tight spaces.
- Momentary touch switch behavior for touch buttons, keypads, and interactive systems.
SKU: n/a - Soldering Tools
Soldering Iron Tip Cleaning Sponge
– High-quality heat-resistant cellulose sponge for soldering tip maintenance
– Effectively removes oxidation, dirt, and excess solder
– Gentle on tips to prevent damage and preserve plating
– Damp with water for optimal cleaning performance
– Compact size fits most soldering iron stands; can be trimmed if needed
– Extends soldering tip life and improves soldering efficiencySKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
Boards, Modules and Accessories, Sensors And ModulesTEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
- Compact 40 x 40 x 3.6 mm Peltier cooling module
- Rated 12V DC, draws up to 6A for powerful cooling
- Delivers up to 60W cooling with a proper heatsink
- Solid-state ceramic construction for long life and moisture protection
- Cools one side while heating the opposite side for directional thermal control
- Ideal for DIY fridges, PC cooling, lab equipment, sensors, and portable chillers
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Water Level Sensor Module
– High sensitivity sensing using parallel conductors for precise water level detection
– Analog voltage output for easy integration with microcontrollers
– Clear pin labels and simple wiring for quick setup
– Slim, compact, and lightweight design for tight installations
– Corrosion-resistant construction for long-lasting performance
– Ideal for aquariums, water tanks, irrigation systems, and DIY projectsSKU: n/a - Integrated Circuits (ICs)
CD4026 7-Segment Counter IC (DIP)
– Built-in decade counter with integrated 7-segment decoder and display driver
– Directly drives common-cathode 7-segment displays
– Wide supply voltage: 3 V to 15 V (TTL & CMOS compatible)
– Low power consumption with high noise immunity
– Includes clock, reset, carry-out, and display enable inputs
– DIP package ideal for breadboards and prototypingSKU: n/a - Motors, Drivers and Wheels
DC Encoder Motor 333RPM 12V (JGB37-520) with 85mm Wheel (Complete Kit)
- Complete DC encoder motor kit with JGB37-520 333RPM 12V motor
- Built-in encoder (20 PPR) for precise position and speed feedback
- 85 mm rubber tire wheel with 6 mm D-shaft and set screw
- High torque: approx. 8 kg·cm stall torque; low current at no load
- Pre-assembled motor and wheel plus mounting hardware for quick installation
- Compact, durable design ideal for robots, RC cars, and education projects
SKU: n/a - Buck, Boost Converters and Regulators
XL6009E1 DC-DC Auto Step Up/Down Buck/Boost Converter Module 1.3-35V 3A
Buck, Boost Converters and RegulatorsXL6009E1 DC-DC Auto Step Up/Down Buck/Boost Converter Module 1.3-35V 3A
- Auto buck-boost DC-DC converter module with XL6009E1 chip for automatic voltage step-up and step-down
- Wide input voltage range: 5V to 32V DC with adjustable output from 1.3V to 35V DC
- High output current capacity up to 3A (2A recommended for continuous operation)
- Excellent conversion efficiency up to 94% with 400kHz switching frequency
- Precision multi-turn potentiometer for accurate output voltage adjustment
- Compact design (48 x 25 x 15 mm) ideal for battery-powered, solar, and embedded electronics projects
SKU: n/a - Boards, Modules and Accessories, Accessories
12v Piezo Active Big Buzzer
- Operates at 12V DC for standard alarm and indicator circuits
- Active piezo design with built-in oscillator, no external driver required
- Compact round form factor, approximately 30mm diameter
- Lightweight and easy to mount on PCB or panel
- Loud, sharp sound output with low power consumption
- Durable construction for reliable continuous or intermittent use
SKU: n/a - Buck, Boost Converters and Regulators
XL7015 DC-DC Step Down Buck Converter Module
- Compact XL7015 DC-DC buck step-down module for efficient voltage regulation.
- Wide input range: 8-80V DC for flexible power sources.
- Fixed regulated outputs: 5V or 12V (version-dependent).
- Output current: 0.8A continuous, 1A peak for small loads.
- High efficiency up to 85% to minimize heat and power loss.
- Built-in short-circuit and thermal protection for safe operation.
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Mini DC Water Pump 5-12V R365 (Non-Submersible)
Boards, Modules and Accessories, Motors, Drivers and WheelsMini DC Water Pump 5-12V R365 (Non-Submersible)
- Works with 5V to 9V DC power supply
- Non-submersible design for placement outside the water source
- Compact and lightweight plastic housing for easy mounting
- Low power consumption and quiet operation
- Compatible with Arduino and Raspberry Pi for automation
- Ideal for DIY plant watering and small water circulation projects
- Suitable for indoor fluid control systems and educational experiments
SKU: n/a - Integrated Circuits (ICs)
7473 JK Flip-Flop IC (DIP)
– Dual JK flip-flops in a single DIP-14 package
– Edge triggered operation for accurate timing
– TTL-compatible inputs and outputs for easy interfacing
– Low power consumption with high-speed switching
– Includes clear (reset) and clock inputs for each flip-flop
– Ideal for frequency division, binary counting, and data storageSKU: n/a - Boards, Modules and Accessories, Display Modules and LCDs
4-Digits 7-Segment LED Display Module (TM1637)
Boards, Modules and Accessories, Display Modules and LCDs4-Digits 7-Segment LED Display Module (TM1637)
- 4-digit 7-segment LED module for clear numeric readouts
- TM1637 driver IC with simple 2-wire interface (CLK, DIO)
- High-brightness LEDs for excellent visibility in varied lighting
- Compact, slim module ideal for tight enclosures and projects
- Easy integration with Arduino, Raspberry Pi and other MCUs
- Perfect for clocks, counters, voltmeters, thermometers and DIY builds
SKU: n/a - Boards and Programmers
ESP32 C3 Super Mini Development Board (HW-566AB)
• Ultra-compact IoT development board (22.5 × 18 mm) with ESP32-C3 RISC-V processor
• Built-in Wi-Fi 802.11 b/g/n (2.4GHz) and Bluetooth 5.0 LE connectivity
• USB Type-C interface for direct programming and power without external USB-to-serial adapter
• 4MB flash memory, 400KB SRAM, and up to 160MHz clock speed
• Low power consumption with deep sleep current around 43µA, ideal for battery-operated projects
• 11-22 GPIO pins with UART, SPI, I2C, PWM, and ADC interfaces for versatile applications
• Perfect for IoT devices, smart home automation, wearables, and embedded systemsSKU: n/a - BMS Modules and Accessories
3S 12.6V 20A Li-Ion Cell BMS Charging Protection Module
- Designed for 3S (12.6V) Li-Ion / Li-Po battery packs
- 20A continuous discharge current rating for medium to high-power loads
- Overcharge cutoff at ~4.25V and over-discharge cutoff at ~2.7V per cell
- Built-in overcurrent and short-circuit protection with automatic recovery
- Active cell balancing to maintain equal voltages and extend pack life
- Compact PCB design suitable for e-bikes, robotics, LEDs, drones, and DIY packs
SKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
CKCS BS01 Mini DC-DC Step Up Boost Converter Module
Boards, Modules and Accessories, Buck, Boost Converters and RegulatorsCKCS BS01 Mini DC-DC Step Up Boost Converter Module
– Compact boost converter module for raising low DC voltages to stable higher outputs
– Wide input range (typically 2V-24V) suitable for batteries, USB, or solar
– Adjustable output voltage (can reach up to ~28V depending on input)
– High-efficiency switching design reduces energy loss
– Small, lightweight form factor ideal for portable and space-constrained projects
– Ideal for Arduino, ESP32, Raspberry Pi, robotics, solar chargers and DIY electronicsSKU: n/a - Accessories, Boards, Modules and Accessories
Transistors
– High-quality transistors for a wide range of electronic projects
– Available types: NPN, PNP, power, and small signal transistors
– Options for low-power, high-power, RF, silicon, and germanium applications
– Durable, reliable components built for industrial and consumer electronics
– Competitive transistor pricing and affordable solutions in Islamabad
– Ideal for amplifiers, switches, communication systems, and power suppliesSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-022 IR Infrared Receiver Module 38kHz
- High-sensitivity IR detection for reliable remote signal reception.
- Wide receiving angle captures signals from multiple directions.
- Built-in 38kHz demodulation circuit for easy decoding.
- Simple 3-pin interface: VCC, GND, OUT—easy microcontroller integration.
- Compact, low-power design suitable for battery-operated projects.
- Ideal for remote controls, home automation, robotics, and DIY electronics.
SKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















