- Boards, Modules and Accessories, Display Modules and LCDs
0.28 Inch Mini DC 0-100V 3-Wire Digital Voltmeter Voltage Meter
Boards, Modules and Accessories, Display Modules and LCDs0.28 Inch Mini DC 0-100V 3-Wire Digital Voltmeter Voltage Meter
- Compact 0.28-inch LED display for tight spaces
- Accurate DC voltage readings in real time
- Clear, bright LED for easy visibility even in low light
- Energy efficient with low power consumption
- Simple installation and easy integration into projects
- Ideal for RC, battery testing, solar, and DIY electronics
SKU: n/a - Boards and Programmers, Sensors And Modules
ESP32 ESP32S 38P Expansion Board Terminal Adapter (Purple Shield)
Boards and Programmers, Sensors And ModulesESP32 ESP32S 38P Expansion Board Terminal Adapter (Purple Shield)
- 38-pin expansion board designed for ESP32 DevKit modules with screw terminal interface
- Full GPIO breakout with clearly labeled pins for easy access and organized wiring
- Secure screw terminal connections eliminate soldering for fast prototyping
- Dual interface design combines female headers and screw terminals for flexibility
- Multiple power distribution points with 3.3V, 5V, and GND terminals
- Plug-and-play installation with stable FR-4 PCB construction
- Ideal for IoT projects, robotics, sensor interfacing, and educational applications
SKU: n/a - Resistors, Capacitors, Inductors etc.
330μF 25V Electrolytic Polarized Capacitor
– 330µF capacitance for effective filtering and ripple suppression
– 25V DC rated voltage for low to medium-voltage circuits
– Polarized electrolytic design for efficient energy storage
– Radial lead, through-hole package for easy PCB and breadboard mounting
– Low leakage current and compact durable construction for long service lifeSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
27mm Piezoelectric Ceramic Brass Disc with Wire (XHXDZ-27MM)
Boards, Modules and Accessories, Sensors And Modules27mm Piezoelectric Ceramic Brass Disc with Wire (XHXDZ-27MM)
- 27mm diameter piezoelectric ceramic disc bonded to a brass base
- Converts AC or pulsed DC electrical signals into audible and ultrasonic sound
- Lightweight, compact design ideal for compact enclosures
- Low power consumption for battery and microcontroller projects
- Commonly used in buzzers, alarms, ultrasonic sensors and DIY sound modules
SKU: n/a - Intermediate Electronics Kits
ESP32 IoT Based Basic Learning Kit with Component Box
- Beginner-friendly ESP32 IoT learning kit with Wi-Fi and Bluetooth enabled board.
- Includes sensors: DHT11, HC-SR04, HC-SR501 PIR, LDR module and more.
- Comes with OLED display, 2-channel relay, RGB LED, buzzer and potentiometer.
- Ready-to-use breadboard, jumpers, resistors and 5 large push buttons in an organized component box.
- No soldering required – breadboard-friendly parts for plug-and-play prototyping.
SKU: n/a - Boards, Modules and Accessories
TCS34725 RGB Color Sensor Module
- High-accuracy TCS34725 RGB color sensor module with digital color recognition.
- Built-in IR blocking filter for precise color readings under mixed lighting.
- Integrated white LED for consistent illumination and ambient light measurement.
- I2C communication for easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Compact TCS34725 sensor breakout board ideal for robotics, smart lighting, and embedded projects.
- Perfect for students, engineers, and hobbyists—available to buy online in Pakistan.
SKU: n/a - Boards, Modules and Accessories, Wireless Communication
IR Infrared Remote Control and Receiver Module (TX/RX)
Boards, Modules and Accessories, Wireless CommunicationIR Infrared Remote Control and Receiver Module (TX/RX)
- Compact IR transmitter and receiver kit ideal for Arduino and DIY projects
- 21-key IR remote included with battery for immediate use
- High-sensitivity HX1838-compatible receiver, digital output
- 38 kHz IR frequency with a reliable 8-10 meter range
- Operates at 3.3V-5V and works with Arduino, ESP32, Raspberry Pi
- Plug and play design for rapid prototyping and home automation
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
DFPlayer Mini MP3 Player Module
– Compact DFPlayer Mini MP3 module for Arduino, ESP32 and Raspberry Pi projects
– Plays MP3, WAV and WMA files from microSD/TF cards up to 32GB (FAT16/FAT32)
– Built-in amplifier for direct connection to 4Ω or 8Ω speakers
– Operates standalone or under UART serial control with simple DFPlayer Mini pinout
– 30-step digital volume control, onboard LED and low power consumption for portable builds
– Wide voltage range 3.2V to 5V for easy integration with microcontrollersSKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
A2212 1400KV BLDC Brushless DC Drone Motor
Boards, Modules and Accessories, RC Drones and AccessoriesA2212 1400KV BLDC Brushless DC Drone Motor
- 1400KV rating for high-speed performance and quick acceleration
- Efficient brushless BLDC design for smooth operation and low maintenance
- High torque output for demanding tasks and responsive control
- Durable precision construction for long-lasting reliability
- Lightweight, compact form factor for easy integration into small frames
- Ideal choice for drones, RC vehicles, boats, and custom mechanical projects
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 4-Channel Arduino Relay Module Board
- Control up to 4 devices independently with four relay channels.
- Supports 250V AC/10A or 30V DC/10A per channel for high-power loads.
- Optocoupler isolation protects your microcontroller from high-voltage circuits.
- LED indicators provide clear visual status for each relay channel.
- Standard 5V TTL inputs — compatible with Arduino, Raspberry Pi and most MCUs.
- Screw terminals and mounting holes for secure wiring and easy installation.
SKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
A2212 1000KV BLDC Brushless DC Drone Motor
Boards, Modules and Accessories, RC Drones and AccessoriesA2212 1000KV BLDC Brushless DC Drone Motor
- 1000KV brushless design for efficient, high-RPM performance
- Lightweight A2212 form factor for small drones and RC planes
- Smooth, low-vibration operation for stable flight and longer motor life
- Compatible with 2S to 3S LiPo batteries and common 20A ESCs
- Durable construction with standard A2212 mounting pattern for easy replacement
- Balanced thrust and runtime ideal for hobbyist multirotors and fixed-wing models
SKU: n/a - Jumper Wires and JST Connectors etc.
2-Pin JST RCY Connector Wire Cable Pair (2.54mm Pitch)
- 2-Pin JST RCY male and female connector pair for secure DC connections.
- Standard 2.54mm pitch for broad compatibility.
- Pre-attached red (positive) and black (negative) wires for correct polarity.
- Approx. 15–20cm wire length per side for flexible placement.
- Snap-fit locking mechanism to prevent accidental disconnections.
- Compact, lightweight and durable housing for repeated use.
SKU: n/a - Boards, Modules and Accessories
4 x AA Battery Cell Holder 4-Cell Holder
– Holds 4 AA batteries securely for reliable power
– Ideal for Arduino, robotics, and electronics projects
– Great for DIY power banks and small solar systems
– Affordable, durable construction for repeated use
– Simple installation and stable battery connections
– Perfect for home automation and hobby electronicsSKU: n/a - Batteries, Cells and Power Supply, Boards, Modules and Accessories
4x 18650 Battery Case Cell Holder
– Holds four 18650 lithium-ion cells (batteries not included)
– Spring-loaded contacts for reliable electrical connection and vibration resistance
– Solder-free terminals for quick installation and removal
– Durable ABS/plastic construction for long service life
– Compact, space-saving design for portable electronics
– Flexible mounting: screw holes and adhesive backing optionsSKU: n/a - Jumper Wires and JST Connectors etc.
40-Wire Colored Flat Ribbon Cable Jumper Wires (1 foot) (2.54mm Pitch)
Jumper Wires and JST Connectors etc.40-Wire Colored Flat Ribbon Cable Jumper Wires (1 foot) (2.54mm Pitch)
- 40 individually insulated conductors in a flat ribbon layout with standard 2.54mm pitch
- 1 foot (30.5cm) cable length, perfect for breadboard and development board connections
- Color-coded wires for quick signal identification and easy troubleshooting
- Flexible construction allows neat routing inside project enclosures and around modules
- Compatible with Arduino, Raspberry Pi, ESP32, pin headers, and IDC connectors
- Can be split for single or multi-pin connections in prototyping and robotics projects
SKU: n/a - Buck, Boost Converters and Regulators
20A 300W High-Power Step Down Buck Converter Module 6-40V to 1.2-36V
Buck, Boost Converters and Regulators20A 300W High-Power Step Down Buck Converter Module 6-40V to 1.2-36V
- High-power DC-DC buck converter with 6-40V input to 1.2-36V adjustable output
- Delivers up to 20A peak current (10-15A recommended) and 300W output power
- Efficient voltage regulation with up to 95% conversion efficiency
- Features large heat sink for improved thermal performance and stable operation
- Ideal for motors, LED systems, battery charging, robotics, and solar power applications
- Dual potentiometers for easy voltage and current adjustment
SKU: n/a - Accessories
12x18cm Double Sided Fiber Glass Green Veroboard
- Extra-large 12x18cm double-sided FR4 fiber glass veroboard for complex circuit prototyping
- Copper pads on both sides enable efficient routing and higher component density
- Durable FR4 material provides excellent heat resistance and mechanical strength
- Standard 2.54mm pitch compatible with ICs, headers, and common components
- Pre-drilled holes with green solder mask for professional-quality circuit assembly
- Ideal for power electronics, multi-module systems, and advanced embedded projects
SKU: n/a - Buck, Boost Converters and Regulators
Mini 360 DC-DC Step Down Buck Converter Module
– Input Voltage: 4.75V to 23V DC
– Output Voltage: 1V to 17V DC adjustable
– Output Current: up to 1.8A (recommended 1.2A for stable operation)
– High efficiency up to 95% (MP2307 switching regulator)
– Compact size: 17 mm x 11 mm x 4 mm with built-in thermal and short-circuit protection
– Ideal for Arduino, ESP, Raspberry Pi, IoT and battery-powered DIY projectsSKU: n/a - Motors, Drivers and Wheels, Boards, Modules and Accessories
130mm Rubber Wheel for Robotic Car
– Large 130mm diameter for improved ground clearance and stability
– High-grip rubber tire for excellent traction on uneven surfaces
– Durable plastic hub with secure motor fitting
– Lightweight construction reduces load on motors for smoother movement
– Compatible with DC motors and gear motors commonly used in robotics
– Ideal for robotic cars, smart vehicles, outdoor rovers, and DIY projectsSKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















