- Accessories
RGB Tri-Color Common Anode (CA) LED 4-Pin (5mm)
- Versatile RGB LED combining Red, Green, and Blue in a single 5mm package
- Common Anode configuration with 4-pin design for easy microcontroller interfacing
- Produces millions of color combinations through PWM control
- Low power consumption with typical 20mA forward current per color
- Perfect for Arduino, Raspberry Pi, decorative lighting, and DIY projects
- Through-hole mounting for easy breadboard and PCB integration
SKU: n/a - Accessories
8x12cm Double Sided Fiber Glass Green Veroboard
- Double-sided FR4 fiber glass veroboard with copper pads on both sides for flexible circuit routing
- Large 8x12cm (80x120mm) working area ideal for complex projects and multi-component circuits
- Standard 2.54mm pitch holes compatible with ICs, headers, and standard electronic components
- Durable FR4 material with green solder mask for professional finish and improved insulation
- Pre-drilled holes for easy component placement and soldering in prototyping applications
- Perfect for Arduino projects, robotics, audio amplifiers, and educational experiments
SKU: n/a - Batteries, Cells and Power Supply
3.7V 800mAh 803035 2.96Wh LiPo Rechargeable Battery
– Nominal voltage 3.7V, capacity 800mAh (2.96Wh)
– Slim 8 x 30 x 35 mm profile ideal for tight spaces
– Lightweight lithium polymer chemistry for high energy density
– Optional PCM protection against overcharge, over-discharge, and short circuit
– 300 to 500 charge/discharge cycles under normal use
– Ideal for IoT devices, wearables, RC models, DIY electronics, and handheld gadgetsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 2-Channel Arduino Relay Module Board
– Dual-channel relay board to control two independent high-power circuits
– Compatible with Arduino, Raspberry Pi, ESP32 and most microcontrollers
– Switches typical loads up to 10A (250VAC / 30VDC) per channel
– Onboard LEDs and screw terminals for secure wiring and status feedback
– Selectable low-level or high-level trigger with opto-isolation jumper for safer interfacing
– Compact PCB footprint ideal for home automation, robotics, IoT, and industrial projectsSKU: n/a - Boards and Programmers
ESP32-S3 CAM Development Board with OV3660 Camera Module
- ESP32-S3 dual-core processor running at 240MHz for high-performance AI and IoT applications
- Built-in OV3660 2MP camera module for image capture, video streaming, and face detection
- 16MB Flash + 8MB PSRAM for smooth image processing and larger buffer handling
- Dual USB Type-C ports for easy programming and power without external FTDI adapter
- Wi-Fi 2.4GHz and Bluetooth 5 connectivity for wireless IoT projects
- MicroSD card slot for local storage of images and video recordings
- AI acceleration support ideal for face detection, object recognition, and edge computing tasks
SKU: n/a - Integrated Circuits (ICs)
LM393 Dual Comparator IC (DIP)
- Dual precision voltage comparators in a single DIP package
- Wide supply range: 2V to 36V (single supply) or ±1V to ±18V (dual supply)
- Open-collector outputs for easy logic interfacing
- Low power consumption, ideal for battery-powered projects
- Fast response and high accuracy for threshold detection
- Breadboard-friendly DIP package for prototyping and education
SKU: n/a - Boards, Modules and Accessories
F240 Adjustable Double Layer Component Organizer Tool Box
– Double layer design for extra storage without increasing desk footprint.
– Multiple adjustable compartments for resistors, ICs, jumpers, screws, and small parts.
– Transparent lids and labeled slots for fast part identification.
– Impact-resistant plastic and secure hinges for lab, shop, and field use.
– Stackable and modular so you can expand your storage system.
– Ideal for professionals, hobbyists, and students.SKU: n/a - Sensors And Modules, Wireless Communication
UBlox NEO-6M GPS Module V2 with Antenna
- High-precision GPS positioning with typical 2.5 meter accuracy.
- Fast satellite acquisition with startup time under 35 seconds in open sky.
- Multi-constellation support: GPS, GLONASS, and Galileo for improved reliability.
- Compact form factor for easy integration into drones, vehicles, and IoT devices.
- UART serial interface (TX/RX) compatible with Arduino, Raspberry Pi and other microcontrollers.
- Built-in antenna for straightforward setup; supports external antenna for challenging reception.
SKU: n/a - Accessories
1-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Single-slot charger for one lithium-ion cell: compatible with 16340, 14500, and 18650
– USB Type-C input for universal, reliable charging from adapters, laptops, or power banks
– Auto-adjust charging current (0.5A to 1A) for safe and efficient charging
– LED status indicator: Red = Charging, Green = Fully Charged
– Multiple safety protections including overcharge, short-circuit, overheat, reverse polarity, and over-discharge recovery
– Compact ABS housing with spring-loaded contacts for secure battery placement and portabilitySKU: n/a - Boards, Modules and Accessories
65pcs Jumper Wire Cables Male To Male
- 65-piece male-to-male jumper wire set in assorted colors
- Multiple lengths for breadboards, Arduino, and Raspberry Pi
- Solderless, flexible, and reusable for fast prototyping
- Firm connectors for reliable, stable connections
- Ideal for sensors, modules, LEDs, and DIY electronics projects
- Color-coded wires for quick identification and tidy workspaces
SKU: n/a - Motors, Drivers and Wheels
ZK-5AD 5A Dual H-Bridge Motor Driver Module
- Dual H-bridge driver for two DC motors or one stepper motor
- 5A continuous per channel, 10A peak for short bursts
- Wide 3V to 14V DC motor supply range
- PWM speed control up to 20kHz, forward and reverse
- MOSFET output stage with 90% or higher efficiency
- Works with Arduino, ESP32, STM32 and Raspberry Pi
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Rain Drops Detection Sensor Module
- High-sensitivity conductive sensing board detects even light raindrops.
- Digital output for simple rain/no-rain detection with microcontrollers.
- Analog output provides a voltage proportional to rain intensity.
- Built-in potentiometer for easy sensitivity adjustment.
- Compact, lightweight design for simple mounting and integration.
- Ideal for weather monitoring, automated irrigation, and environmental projects.
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Stepper Motor (NEMA 17) (40mm, 48mm) Brand New
Boards, Modules and Accessories, Motors, Drivers and WheelsStepper Motor (NEMA 17) (40mm, 48mm) Brand New
- High precision 1.8° step angle (200 steps/rev) for accurate motion control.
- High torque output for reliable holding and steady performance.
- Compact NEMA 17 form factor — available in 40mm and 48mm heights.
- Bipolar 4-wire configuration for easy integration with common drivers.
- Durable metal construction built for continuous use and longevity.
- Low vibration and noise for smooth operation in printers, CNCs and robots.
SKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
Type-C USB Step-Up Boost Converter Module 5V 2A
Boards, Modules and Accessories, Buck, Boost Converters and RegulatorsType-C USB Step-Up Boost Converter Module 5V 2A
– Input: 2.5V–4.2V DC (supports single-cell lithium batteries)
– Output: Stable fixed 5V DC
– Maximum output current: up to 2A
– USB Type-C port for convenient power delivery
– Compact, efficient and lightweight design
– Built-in over-current and short-circuit protection for safe useSKU: n/a - Sensors And Modules
DS18B20 Waterproof Temperature Sensor 1meter Wire
- Waterproof stainless steel DS18B20 probe with 1 m cable for immersion and outdoor use.
- Digital 1-Wire communication lets multiple sensors share a single microcontroller pin.
- Wide operating range -55°C to +125°C with ±0.5°C accuracy (−10°C to +85°C).
- Configurable 9 to 12 bit resolution; supports normal and parasite power modes.
- Compatible with Arduino, ESP32, Raspberry Pi and other development boards.
- Ideal for weather stations, aquariums, soil monitoring, HVAC and industrial applications.
SKU: n/a - Resistors, Capacitors, Inductors etc.
102 1nF 1000pF 0.001μF Non-Polar Ceramic Capacitor
- Capacitance Value: 1000pF (1nF / 0.001μF) with marking code 102
- Non-Polarized Design: Can be connected in any orientation for easy installation
- Stable Ceramic Dielectric: Reliable performance across wide range of applications
- Compact Through-Hole Package: Ideal for PCB mounting and breadboard prototyping
- High-Frequency Applications: Perfect for RF circuits, oscillators, filtering, and timing circuits
- Low Leakage Current: Suitable for signal coupling, decoupling, and noise suppression
- Long Operational Lifespan: High reliability for Arduino projects and general-purpose circuit design
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
VL53L0X Time-of-Flight (ToF) Laser Ranging Distance Sensor Module V2
Boards, Modules and Accessories, Sensors And ModulesVL53L0X Time-of-Flight (ToF) Laser Ranging Distance Sensor Module V2
- Time-of-Flight (ToF) laser distance sensing up to 2 meters
- High accuracy with up to 1 mm resolution
- Fast measurement rate for real-time applications
- Compact, low-power design ideal for battery projects
- Easy I2C interface for straightforward microcontroller integration
- Reliable performance across varied lighting and reflective surfaces
SKU: n/a - Integrated Circuits (ICs)
74157 Quad 2-Input Multiplexer MUX IC (DIP)
– Quad 2-Input Multiplexer: 4 independent 2-to-1 selection channels
– TTL-compatible inputs and outputs for standard digital logic
– Common select and enable pins simplify control for all channels
– Fast switching with low propagation delay for timing-sensitive designs
– DIP package for easy breadboard prototyping and PCB integration
– Ideal for data routing, microprocessor interfacing, arithmetic logic, and lab experimentsSKU: n/a - Integrated Circuits (ICs)
74153 Dual 4-Input Multiplexer IC (DIP)
- Dual independent 4-input multiplexers in a single DIP package
- TTL-compatible inputs and outputs for standard digital logic
- Enable inputs provide output control and flexibility
- Breadboard-friendly DIP form factor for easy prototyping
- Low power consumption and reliable operation for digital systems
- Ideal for data routing, logic implementation, and educational projects
SKU: n/a - Tech Tools and Instruments
DT830D Digital Pocket Size Multimeter with Probes (DMM)
– Compact 3.5-digit digital multimeter (DT830D) with clear LCD display
– Measures DC voltage up to 1000V and AC voltage up to 750V
– Measures DC current up to 10A and resistance up to 2 MΩ
– Diode and transistor testing plus continuity buzzer for quick checks
– Rotary dial and included test probes for safe, accurate measurements
– Lightweight, durable, and portable ideal for hobbyists, students, and techniciansSKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















