The ZK-5AD 5A Dual H-Bridge Motor Driver Module is a high-performance motor driver designed to control two DC motors or one stepper motor efficiently and reliably. With a maximum current output of 5A per channel, it provides excellent control for robotics, automation, and DIY projects requiring powerful and stable motor operation.
The module features two independent H-Bridge circuits, allowing for bidirectional control of motor speed and direction using PWM (Pulse Width Modulation) signals. It is ideal for controlling both low- and medium-power motors in robotic cars, conveyors, and other electromechanical systems.
Built with high-quality MOSFETs, the ZK-5AD ensures low heat generation, high efficiency, and excellent load handling capability. Its compact design makes it suitable for integration into embedded systems and custom motor control boards.
Features:
- Dual H-Bridge design – controls two DC motors or one stepper motor independently.
- High current handling – up to 5A continuous current per channel.
- PWM speed control – supports pulse-width modulation for smooth speed variation.
- Direction control – allows forward and reverse motor operation.
- Input voltage range: 3V to 14V DC.
- High-efficiency MOSFET output stage for low heat and reliable operation.
- Compact module design suitable for embedded and robotic applications.
- Protection features: over-temperature, short-circuit, and overload protection.
- Compatible with microcontrollers like Arduino, ESP32, STM32, and Raspberry Pi.
Applications:
- Dual DC motor control
- Stepper motor driving
- Robotic vehicles and automation systems
- Conveyor belt and linear actuator systems
- Smart DIY electronics projects
- Motorized toys and prototypes
Specifications:
- Model: ZK-5AD
- Control Type: Dual H-Bridge (bidirectional)
- Number of Channels: 2
- Operating Voltage: 3V-14V DC
- Continuous Output Current: 5A per channel
- Peak Current: Up to 10A (short duration)
- Control Signal: PWM (0–100% duty cycle)
- Efficiency: ≥ 90%
- Frequency Range: Up to 20kHz PWM frequency
- Operating Temperature: -20°C to +85°C
Note: Images are for Illustration Purposes Only.
How do I choose between the ZK-5AD and a classic L298N motor driver module?
Pick the ZK-5AD when you need up to 5A per channel and a wide 3V to 14V motor supply. Pick the classic L298N Motor Driver Module Dual H-Bridge 3A when your motors run from 5V to 35V and you want the familiar L298N layout with an onboard 5V regulator.
Both boards drive two DC motors or one stepper motor. The main differences:
- Current: ZK-5AD gives 5A continuous per channel (10A peak). The L298N module gives 3A continuous per channel.
- Voltage: ZK-5AD works from 3V to 14V DC. The L298N module works from 5V to 35V.
- Efficiency: ZK-5AD uses MOSFET outputs with efficiency of 90% or more, so it runs cooler. The L298N uses a bipolar IC and needs its heat sink.
- PWM: ZK-5AD supports PWM up to 20kHz. The L298N module has TTL-compatible enable and direction inputs.
For small robots and battery packs up to 14V, the ZK-5AD is the cleaner choice. For 24V motors or projects that follow L298N tutorials, the L298N module fits better. Both are in the Motors, Drivers and Wheels category.
What do I need to know before buying the ZK-5AD motor driver?
Check three things before you order: your motor voltage, your motor current, and how you will wire the control pins.
- Motor voltage: The ZK-5AD accepts 3V to 14V DC. If your motor needs more than 14V, this board is not the right fit.
- Motor current: Each channel handles 5A continuous and up to 10A for short bursts. Add up the stall current of your motors and stay within those limits.
- Control: The board takes PWM signals from Arduino, ESP32, STM32 and Raspberry Pi. You need two direction pins and one PWM pin per motor.
Wiring is simple: motor power to the screw terminals, control pins to your microcontroller, and a common ground between the driver and the board. The module has over-temperature, short-circuit and overload protection, but it is still good practice to test with a low duty cycle first.
College Road Electronics is on College Road, Rawalpindi. Delivery is nationwide across Pakistan at a flat rate of Rs 350. Students get parts and guidance for school, college and university projects. The ZK-5AD is priced at Rs. 450, checked in September 2026. For steering or pan-tilt mechanisms, pair it with an SG90 9g Micro Servo Motor (180 Degree Rotation) or an MG90S Metal Gear Servo Motor (180 Degree Rotation).
Frequently Asked Questions
What is the difference between the ZK-5AD and a standard L298N motor driver module?
The ZK-5AD uses MOSFET outputs and handles 5A continuous per channel with a 3V to 14V motor supply. A standard L298N module handles 3A per channel and accepts 5V to 35V. The ZK-5AD runs cooler and supports PWM up to 20kHz. Choose based on your motor voltage and current.
Can I use the ZK-5AD with an Arduino or Raspberry Pi?
Yes. The ZK-5AD accepts PWM control signals from Arduino, ESP32, STM32 and Raspberry Pi. You connect two direction pins and one PWM pin per motor, plus a common ground. No special library is required, just standard digital and PWM output pins.
How many motors can the ZK-5AD drive at the same time?
It has two independent H-bridge channels, so you can drive two DC motors independently or one stepper motor. Each channel handles 5A continuous and up to 10A peak for short durations. This suits robotic cars, conveyors and similar projects.
Does the ZK-5AD have protection against overheating and short circuits?
Yes. The module includes over-temperature, short-circuit and overload protection. These features help prevent damage during stalls or wiring mistakes. Still, keep the board in open air and avoid exceeding the 5A continuous rating per channel for long periods.














Reviews
There are no reviews yet