- Sensors And Modules
LM35DZ Temperature Sensor
- Linear Celsius output: 10mV per °C for direct temperature readings
- High accuracy: ±0.5°C at 25°C for reliable measurements
- Operating range: 0°C to 100°C; supply 4V to 30V
- Low power consumption: typically less than 60µA to minimize self-heating
- Compact TO-92 package for easy mounting in circuits
- No external calibration required; simple integration with microcontrollers
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and other microcontrollers
SKU: n/a - Boards and Programmers
ESP32U WiFi + BLE Bluetooth Board Type-C (38 Pin) (Pre-Soldered)
– ESP32-based IoT development board with built-in Wi-Fi (802.11 b/g/n) and Bluetooth Low Energy (BLE)
– USB Type-C interface for power and programming
– 38 GPIO pins for sensors, displays, and peripherals
– Dual-core ESP32 processor with up to 240 MHz clock speed
– Pre-soldered header pins for immediate breadboard and jumper wire use
– Supports Arduino IDE, ESP-IDF, and MicroPython for flexible programmingSKU: n/a - Accessories
PCB Mounting Fuse Holder 5x20mm
– Designed for 5x20mm glass or ceramic cartridge fuses
– Low-profile, space-saving PCB-mounted design
– Strong spring contacts for secure fuse retention
– Easy to solder with stable electrical connectivity
– Quick and hassle-free fuse replacement
– Ideal for power supplies, chargers, audio gear, and DIY PCBsSKU: n/a - Sensors And Modules
INMP441 High Precision Omindirectional Microphone Module
– INMP441 MEMS digital microphone for high-quality audio capture
– Omnidirectional 360° pickup for consistent sound from all directions
– Direct I2S digital output (no external ADC required)
– High SNR (~61 dBA) and wide frequency response (60 Hz to 15 kHz)
– Compact, low-power design ideal for battery-powered IoT devices
– Compatible with ESP32, Raspberry Pi, and other I2S-supported MCUsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TCRT5000 IR Line Tracking Sensor Line Following Module
Boards, Modules and Accessories, Sensors And ModulesTCRT5000 IR Line Tracking Sensor Line Following Module
– Compact TCRT5000 infrared sensor module for reliable line detection
– Detects black and white surfaces with high precision
– Adjustable sensitivity with onboard potentiometer
– Dual outputs: analog (AO) and digital (DO)
– Wide operating voltage: 3.3V to 5V for Arduino and Raspberry Pi compatibility
– Status indicator LED for real-time detection feedback
– Ideal for robotics, automation, and DIY electronics projectsSKU: n/a - Integrated Circuits (ICs)
7490 Decade Counter IC (DIP)
– 4-bit binary decade counter that counts from 0 to 9
– Configurable as divide-by-2, divide-by-5, or divide-by-10
– TTL compatible with fast switching and asynchronous master reset inputs
– Packaged in a standard DIP for easy breadboard and PCB prototyping
– Ideal for clocks, timers, frequency dividers, and seven-segment display driversSKU: n/a - Boards and Programmers
Arduino Uno R3 SMD Development Board
– Compact Arduino Uno R3 with ATmega328P in SMD package for durable, space-saving designs
– 14 digital I/O pins (6 PWM) and 6 analog inputs for versatile sensor and actuator control
– USB interface for easy programming and serial communication
– Compatible with Arduino IDE, shields, modules, and popular libraries
– Can be powered by USB or external 7–12V adapter; built-in regulator and auto-reset
– Ideal for prototyping, robotics, IoT projects, education, and hobby electronicsSKU: n/a - Boards, Modules and Accessories, Accessories
MTS-102 6mm Single Pole Toggle Switch
- SPDT ON-ON toggle switch for simple two-position control
- 6mm threaded mounting bushing for easy panel installation
- Compact, durable design with metal lever for reliable operation
- 3-pin terminals for straightforward wiring and integration
- Ideal for DIY electronics, robotics, model railways, and control panels
- Suitable for low-voltage and low-current applications
SKU: n/a - Motors, Drivers and Wheels
DC Gear Motor with Encoder 280RPM & 620RPM (GA25-370) (Complete Kit)
- Dual speed options: 280 RPM and 620 RPM for flexible performance
- Integrated encoder for accurate speed and position feedback
- High torque in a compact 25 x 37 mm housing
- Durable construction for reliable long-term use
- Complete kit with mounting bracket, screws, wiring harness and 65 mm wheel
- Ideal for robotics, automation and hobbyist projects
SKU: n/a - Boards, Modules and Accessories, Display Modules and LCDs
1.3 Inch 128×64 OLED Display Module
– Compact 1.3 inch OLED module with high-contrast monochrome 128×64 resolution
– Supports I2C and SPI communication for easy integration
– Ultra low power consumption ideal for battery-powered projects
– Lightweight and fits into tight spaces for wearables and portable gadgets
– Compatible with Arduino, Raspberry Pi, and most microcontrollers
– Perfect for dashboards, IoT displays, custom interfaces, and DIY electronicsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
HC-SR501 PIR Motion Sensor Module
- Passive Infrared (PIR) sensor for motion detection.
- Adjustable sensitivity and delay time via onboard potentiometers.
- Detection range up to 7 meters with a 120 degree cone angle.
- Digital output for easy integration with microcontrollers.
- Low power consumption suitable for battery-powered projects.
- Compact, lightweight design for space-constrained applications.
SKU: n/a - Accessories
8-Way DIP Switch SPST Slide Switch (2.54mm)
– 8 independent SPST slide switches in a single compact DIP package
– Standard 2.54mm pin pitch for breadboard and PCB compatibility
– Gold-plated contacts for improved conductivity and corrosion resistance
– Clear ON/OFF sliding action with positive tactile feedback
– Through-hole mounting; durable plastic body for long mechanical life
– Ideal for address selection, mode setting, prototyping, and testingSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
DC Gear Motor 333RPM with Encoder 12V (JGB37-520)
Boards, Modules and Accessories, Motors, Drivers and WheelsDC Gear Motor 333RPM with Encoder 12V (JGB37-520)
– JGB37-520 DC gear motor with encoder, 333 RPM
– 12V operation with up to 1.5 kg-cm torque
– Integrated encoder: 20 pulses per revolution (PPR)
– Compact aluminum housing: 38 × 30 × 40 mm
– Ideal for robotics, automation, and DIY projects
– Reliable, continuous-use design with precise speed feedbackSKU: n/a - Batteries, Cells and Power Supply
5V 2A Rechargeable Li-Ion Battery
– Regulated 5V DC output at up to 2A for sensitive electronics
– Rechargeable Li-Ion technology for long cycle life
– Built-in protection: overcharge, over-discharge, short circuit
– Convenient USB Type-C charging
– Compact, lightweight, high energy density for portable projects
– Wide compatibility with Arduino, ESP modules, Raspberry Pi Pico and IoT devicesSKU: n/a - Boards and Programmers
Arduino Uno R3 DIP ATMEGA328P Development Board
– Socketed ATmega328P DIP microcontroller for easy removal and replacement
– 14 digital I/O pins with 6 PWM outputs
– 6 analog inputs and built-in UART, SPI, I2C interfaces
– USB programming (ATmega16U2 or CH340), auto-reset, Arduino IDE compatible
– Multiple power options: USB, barrel jack (7–12V), or Vin with onboard 5V regulation
– Power LED, TX/RX LEDs, reset button; ideal for education, prototyping, robotics, and IoTSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
35mm Piezoelectric Ceramic Brass Disc (XHXDZ-35MM)
Boards, Modules and Accessories, Sensors And Modules35mm Piezoelectric Ceramic Brass Disc (XHXDZ-35MM)
– 35mm piezoelectric ceramic disc with brass backing
– Brass plate bonded to piezoelectric ceramic layer
– Converts AC or pulsed DC signals into audible or ultrasonic sound
– Compact, lightweight and easy to mount in housings or PCBs
– Low power consumption ideal for buzzers and sensors
– Perfect for Arduino, microcontroller and DIY electronics projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MQ-2 Smoke Gas Sensor Module
- Detects smoke and multiple gases: CO, methane, propane and hydrogen
- Wide detection range from 100 to 10,000 ppm
- Analog 0-5V output proportional to gas concentration
- Fast response time (≤10 seconds) for timely alerts
- Durable design with long service life and stable performance
- 4-pin interface for simple integration with Arduino, Raspberry Pi and microcontrollers
SKU: n/a - Boards, Modules and Accessories
NRF24L01+PA+LNA 2.4GHz Wireless Transceiver Module (1km Range)
- Compact 2.4GHz NRF24L01 transceiver module for wireless data links
- Enhanced PA+LNA version delivers up to 1000m open-space range with a quality antenna
- Low power consumption ideal for Arduino, Raspberry Pi, and IoT projects
- SPI interface for easy plug-and-play integration with microcontrollers
- Stable, secure 2.4GHz communication for robotics, sensors, and home automation
- Works with common libraries and tutorials for quick setup and prototyping
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
LM393 Sound Detection Sensor Module
- High-sensitivity microphone with onboard LM393 comparator for accurate sound detection
- Adjustable sensitivity via built-in potentiometer to tune detection threshold
- Dual outputs: Digital output for threshold triggers and Analog output for raw sound level
- Compact form factor and clear pinout labels for easy connection to microcontrollers
- Low power 5V operation with wide operating temperature range (-20°C to 70°C)
- Great for sound-activated projects, noise monitoring, and interactive installations
SKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2741 products sold
- On College Road from 2025
- Owner: College Road Electronics



















