- Boards, Modules and Accessories, Sensors And Modules
DHT11 Temperature & Humidity Sensor Module
– Dual measurement: temperature and humidity in a single compact module
– Digital single-wire output for easy microcontroller integration
– Reliable accuracy: ±2°C temperature and ±5% RH humidity
– Wide measurement range: 0°C to 50°C and 20% to 90% RH
– Low power consumption ideal for battery-powered projects
– Pre-calibrated and ready to use out of the boxSKU: n/a - Boards, Modules and Accessories
3x 18650 Battery Case Cell Holder
- Holds three standard 18650 lithium-ion cells securely
- Pre-attached leads and wires for quick, tool-free connection
- Durable, heat-resistant plastic frame for repeated use
- Lightweight and stackable for clean, compact builds
- Ideal for DIY projects, robotics, flashlights, and electronics
- No soldering required – insert cells and start powering your project
SKU: n/a - Integrated Circuits (ICs)
74138 3-to-8 Line Decoder/Demultiplexer IC (DIP)
- TTL-based 3-to-8 line decoder and demultiplexer
- Accepts a 3-bit binary input and provides eight active-low outputs
- Three enable inputs (two active-low, one active-high) for flexible control and cascading
- Fast switching, low power consumption from TTL technology
- Standard 16-pin DIP package, breadboard and PCB friendly
- Ideal for memory addressing, I/O selection, and digital logic projects
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.54mm (4-Pin) (Straight / Right Angle)
– JST Male Connector, 2.54mm pitch, 4-pin configuration
– Available in straight and right-angle PCB mounting styles
– Secure metal contacts with corrosion resistance for long life
– Lightweight, compact design for tight spaces and prototyping
– Ideal for Arduino, robotics, drones, RC models, sensors and PCBs
– Compatible with wiring harnesses, prototyping boards and custom cablesSKU: n/a - Boards, Modules and Accessories
TT Gear Motor with 65mm Rubber Wheel
– High-torque TT gear motor for reliable robot motion
– Built-in gearbox for low RPM and strong torque
– Compatible with 65mm rubber wheels for secure traction
– Compact, durable housing with easy mounting points
– Ideal for Arduino, Raspberry Pi, and DIY robotics projects
– Perfect for small robots, robotic cars, and STEM learningSKU: n/a - Display Modules and LCDs
1-Digit 7-Segment Common Anode LED Display
- Single digit numeric display module for showing digits 0-9 clearly and brightly
- Common Anode configuration with 7 LED segments (A-G) plus decimal point (DP)
- High brightness LEDs with low power consumption for efficient operation
- Compact through-hole design for easy mounting on PCBs and breadboards
- Compatible with Arduino, ESP32, PIC, AVR, STM32, and other microcontrollers
- Perfect for digital clocks, counters, timers, measurement instruments, and embedded projects
SKU: n/a - Accessories
2x 18650 Battery Cell Holder with Cover and On/Off Switch
• Holds 2 × 18650 Li-ion batteries (not included) for approx. 7.4V nominal
• Built-in ON/OFF rocker switch for easy power control
• Snap-on protective cover prevents dust and accidental contact
• Durable ABS enclosure with pre-soldered red (+) and black (-) leads
• Compact and lightweight (approx. 78 × 42 × 20 mm); ideal for portable use
• Ready for DIY electronics, robotics, Arduino, Raspberry Pi, and lighting projectsSKU: n/a - Integrated Circuits (ICs)
74151 8-Input Multiplexer IC (DIP)
– High-speed 8-input multiplexer from the 74-series TTL logic family
– Select one of eight data inputs using three select lines (A, B, C)
– Strobe (enable) input for controlled operation
– Provides true (Y) and complementary (W) outputs
– Standard Dual In-Line Package (DIP) for easy breadboard and PCB prototyping
– Ideal for data routing, ALUs, communication systems, and digital learningSKU: n/a - Boards, Modules and Accessories
44mm Rubber Wheel for N20 DC Gear Motor
– Precision 44mm rubber drive wheel designed for N20 DC gear motors
– High-traction rubber compound for improved grip on multiple surfaces
– Durable construction for repeated use in robotics and motorized toys
– Compact, lightweight design for smooth, efficient movement
– Easy to install and ideal as an upgrade or replacement part
– Perfect for DIY robotics, educational projects, and small automation buildsSKU: n/a - Boards, Modules and Accessories
Li-Ion 3.7V 18650 Rechargeable Battery Cell (1500mAh)
- Rechargeable lithium-ion battery with 3.7V nominal voltage and 1500mAh capacity
- Standard 18650 cylindrical form factor fits most battery holders and devices
- High energy density with low self-discharge for long-lasting performance
- Supports hundreds of charge and discharge cycles for extended lifespan
- Perfect for flashlights, power banks, robotics, IoT devices, and DIY electronics
- Lightweight and compact design ideal for portable applications
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 DIP Board with Free USB Cable
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
SKU: n/a - Accessories
2-Way DIP Switch SPST Slide Switch (2.54mm)
– Compact 2-position DIP slide switch with SPST on/off operation
– Standard 2.54mm pitch, fits breadboards and PCBs
– Gold-plated contacts for reliable conductivity and corrosion resistance
– Through-hole mounting with durable plastic housing
– Tactile sliding mechanism with clear ON/OFF markings
– Ideal for microcontroller settings, address selection, and prototypingSKU: n/a - Boards, Modules and Accessories, Accessories
Small Micro Limit Switch
- Compact snap-action limit switch for tight spaces
- Precision lever actuator for accurate position detection
- 3-pin terminals (COM, NO, NC) for flexible wiring
- Easy screw-hole mounting for secure installation
- Ideal for robotics, CNC machines, and 3D printers
- Durable construction for long service life in low-voltage circuits
SKU: n/a - Integrated Circuits (ICs)
L293D Dual H-Bridge Motor Driver IC (DIP)
– L293D Dual H-Bridge Motor Driver IC in a 16-pin DIP package for easy prototyping
– Drives 2 DC motors or 1 stepper motor with independent direction control
– Bidirectional motor control (forward and reverse) with PWM speed input
– Up to 600mA continuous output per channel, 1.2A peak
– Wide supply voltage range: 4.5V to 36V
– Built-in clamp diodes for back EMF protection; TTL/CMOS compatible inputsSKU: n/a - Boards, Modules and Accessories
Mini DC Toy Motor 5V
- Compact 5V DC motor ideal for small toys and models
- High-speed rotation for energetic play
- Quiet, smooth operation for indoor use
- Lightweight design fits tight spaces in hobby projects
- Easy to power with low-voltage circuits and batteries
- Durable and affordable for school kits and DIY builds
SKU: n/a - Boards, Modules and Accessories
DC 3V-6V 1:120 Gear Ratio High Speed TT Gear Motor
- Compact design fits tight spaces in robots and small machines
- High speed output for reliable movement
- Low noise and smooth operation for precise control
- Durable, heat-resistant construction for long service life
- Energy-efficient motor and gearbox for extended runtime
- Easy to install in robotics, automation, and DIY projects
SKU: n/a - Accessories
IR LED Transmitter and Receiver Pair (5mm)
– 5mm IR LED transmitter (emitter) and receiver (detector) pair
– Ideal for robots, remote control, and IR communication projects
– Low power consumption with fast response for reliable sensing
– Compact 5mm package for easy integration into PCBs and breadboards
– Compatible with Arduino, Raspberry Pi, PIC and other microcontrollers
– Perfect for line-following, obstacle detection, remotes, and proximity sensingSKU: n/a - Integrated Circuits (ICs)
ULN2003 Stepper Motor Driver IC (DIP)
– 7 Darlington transistor arrays in one DIP IC
– Each channel sinks up to 500 mA and withstands 50 V
– Built-in freewheeling diodes for inductive load protection
– Open-collector outputs compatible with TTL and CMOS
– Standard DIP package ideal for breadboards and prototyping
– Ideal for stepper motors, relays, solenoids, and LED driversSKU: n/a - Resistors, Capacitors, Inductors etc., Sensors And Modules
Photoresistor LDR Light Dependent Resistor Module
Resistors, Capacitors, Inductors etc., Sensors And ModulesPhotoresistor LDR Light Dependent Resistor Module
– Precise ambient light detection with an LDR photoresistor
– Both analog (AO) and digital (DO) outputs for flexible interfacing
– Easy to integrate with Arduino, Raspberry Pi and other microcontrollers
– Low power consumption, ideal for battery and solar-powered systems
– Compact, lightweight design for space-constrained projects
– Perfect for automated lighting, solar devices, robotics and IoT applicationsSKU: n/a - Resistors, Capacitors, Inductors etc.
1000μF 25V Electrolytic Polarized Capacitor
• 1000µF capacitance for effective filtering and energy storage
• 25V DC rated for low to medium-voltage circuits
• Polarized electrolytic design with low ESR for reduced ripple
• Radial lead, through-hole package for easy PCB mounting
• Compact, durable construction for long operational life
• Ideal for power supplies, audio, motor driver, and microcontroller projectsSKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 2739 products sold
- On College Road from 2025
- Owner: College Road Electronics



















