Shop
Showing 766–780 of 1164 resultsSorted by popularity
-
Intermediate Electronics Kits
Smart Line Following 4WD Robot using Arduino LFR (Unassembled)
- Intelligent 4WD robot kit with automatic line following capability using IR sensor technology
- Arduino Uno-based control system with L298N motor driver for precise motor control
- Complete unassembled DIY kit including 4WD chassis, 2 IR sensors, and rechargeable battery setup
- Perfect for learning robotics fundamentals, sensor interfacing, and autonomous navigation
- Ideal for students, STEM education, robotics competitions, and science exhibition projects
- Beginner-friendly design with hands-on assembly experience and reusable components
SKU: n/a -
Intermediate Electronics Kits
Smart IR Remote Controlled 4WD Robot (Unassembled)
• Complete Arduino-based robot kit with wireless infrared remote control for hands-on learning
• Powerful 4-wheel drive system with four independent DC gear motors for superior traction
• L298N dual H-bridge motor driver ensures efficient power delivery and smooth control
• Includes Arduino Uno R3 (SMD), dual 18650 battery setup, and complete chassis kit
• No soldering required – all components pre-wired with jumper cables included
• Perfect for beginners, STEM education, and DIY robotics projects
• Easily expandable platform for adding sensors and custom modificationsSKU: n/a -
Intermediate Electronics Kits
Smart Obstacle Avoidance with Line Following 4wd Robot (Unassembled)
• Complete 4WD Arduino-based robotic platform for hobbyists, educators, and engineers
• Dual functionality: Precise line following with IR sensors and intelligent obstacle avoidance with ultrasonic sensor
• Advanced scanning capability: HC-SR04 sensor on servo turret actively scans left, center, and right to find optimal paths
• Powerful 4-wheel drive system with L298N motor driver for superior traction and control
• Includes all components: Arduino Uno R3, sensors, motors, 18650 battery pack, breadboard, and jumper wires
• Expandable platform with 400-point breadboard for easy circuit additions without soldering
• Ready-to-assemble kit perfect for STEM education, robotics projects, and prototypingSKU: n/a -
Intermediate Electronics Kits
Smart Obstacle Avoidance 4WD Robot using Arduino (Unassembled)
- Intelligent 4WD robot with automatic obstacle detection and avoidance capabilities
- Arduino-controlled system with 3 ultrasonic sensors for multi-direction scanning
- L298N motor driver module ensures smooth and precise navigation control
- Rechargeable battery-powered autonomous robot for continuous operation
- Perfect for STEM education, robotics learning, and science exhibition projects
- Complete unassembled kit ideal for DIY enthusiasts and Arduino beginners
SKU: n/a -
Intermediate Electronics Kits
Smart Home (Rain, Fire, Smoke, Light) System using Arduino (Unassembled)
Intermediate Electronics KitsSmart Home (Rain, Fire, Smoke, Light) System using Arduino (Unassembled)
- Complete Arduino-based smart home automation system with rain, fire, smoke, and light detection capabilities
- Features multiple sensors including rain sensor, flame sensor, MQ2 gas sensor, LDR module, and ultrasonic sensor for comprehensive environmental monitoring
- Includes 3 servo motors for automated actions, 16×2 I2C LCD display for real-time status updates, and audio-visual alerts with buzzers and LEDs
- Perfect for learning home automation concepts, sensor interfacing, embedded systems programming, and smart safety systems
- Ideal for students, STEM education, Arduino beginners, robotics enthusiasts, and science exhibition projects
- Complete unassembled kit with Arduino Uno SMD, MB102 breadboard, all required sensors, actuators, and jumper wires
SKU: n/a -
Intermediate Electronics Kits
Smart 4WD Follow Me Robot using Arduino (Unassembled)
- Intelligent Follow-Me robot with 4WD chassis powered by Arduino Uno for autonomous object tracking
- Ultrasonic sensor mounted on SG90 servo motor continuously scans surroundings for real-time detection
- Dual IR sensors assist with precise movement tracking and obstacle avoidance capabilities
- L298N motor driver ensures smooth and responsive 4-wheel drive movement control
- Rechargeable 18650 lithium battery pack provides portable and efficient power supply
- Perfect for STEM education, robotics competitions, science fairs, and Arduino learning projects
- Complete unassembled kit with all components, jumper wires, and USB programming cable included
SKU: n/a -
Intermediate Electronics Kits
Smart Parking System with 3 Parking Slots using Arduino (Unassembled)
- Arduino-based smart parking automation system with real-time slot monitoring and automatic barrier control
- Features 3 independent parking slots with IR sensors and SG90 servo motor for barrier operation
- 16×2 I2C LCD display shows parking availability and slot status in real time
- Automatically opens barrier when slots are available and closes after vehicle entry
- Complete unassembled kit includes Arduino board, 5 IR sensors, servo motor, LCD, breadboard, and jumper wires
- Ideal for school projects, Arduino learning, IoT demonstrations, and STEM education
SKU: n/a -
Intermediate Electronics Kits
Smart Traffic Light 2-Way System using Arduino (Unassembled)
- Automated 2-way traffic signal control system powered by Arduino Nano
- Realistic Red, Yellow, and Green light operation with programmed timing sequences
- Portable battery-powered design ideal for science exhibitions and demonstrations
- Complete kit includes Arduino Nano, 2x traffic light modules, breadboard, and jumper wires
- Perfect for students, beginners, STEM learning, and DIY electronics projects
- Easy to assemble with reusable hardware components
SKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (6-Pin)
• 6-pin JST PH female connector cable with 2.0mm pitch for multi-signal connections
• 15cm pre-wired cable assembly – plug-and-play design, no soldering required
• Compatible with JST PH male headers on Arduino, ESP32, and embedded PCBs
• Ideal for robotics, drones, sensor arrays, and motor control interfaces
• Secure locking mechanism prevents accidental disconnection during operation
• Flexible multi-core wires with up to 2A per line current rating
• Perfect for compact internal wiring in electronics and automation projectsSKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (5-Pin)
- 5-Pin JST PH Female Connector with 2.0mm pitch for multi-signal connections
- 15cm cable length ideal for compact electronics and robotics projects
- Pre-crimped plug-and-play design requires no soldering on connector side
- Supports up to 2A per line for power and signal transmission
- Compatible with JST PH male headers on Arduino, ESP32, drones, and sensor modules
- Secure locking mechanism prevents accidental disconnection
- Flexible stranded copper wires with PVC insulation for easy routing
SKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (4-Pin)
- JST PH 4-Pin Female Connector with 2.0mm pitch for multi-signal and power connections
- 15cm cable length ideal for compact robotics, drones, and embedded systems
- Plug-and-play design with no soldering required on connector side
- Compatible with JST PH male headers on Arduino, ESP32, and PCB modules
- Secure locking mechanism prevents accidental disconnection during operation
- Flexible insulated wires rated up to 2A per line for low-voltage DC applications
SKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (3-Pin)
- 15cm JST PH Female Connector Cable with 3-pin configuration and 2.0mm pitch
- Pre-wired harness cable for plug-and-play signal and low-power DC connections
- Compatible with Arduino, ESP32, sensors, robotics, drones, and IoT applications
- Features secure locking system to prevent accidental disconnection during operation
- Flexible stranded copper wires with PVC insulation for easy routing in tight spaces
- Supports up to 2A per line, ideal for power + signal + ground configurations
- No soldering required on connector side for quick prototyping and development
SKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (2-Pin)
- Pre-wired JST PH 2.0mm 2-pin female connector cable for plug-and-play electronics connections
- 15cm cable length ideal for compact Arduino, ESP32, drone, and robotics projects
- Compatible with Li-ion/LiPo batteries, sensors, motor drivers, and electronic modules
- Features secure locking fit with flexible insulated wires (typically 22-26 AWG)
- Rated up to 2A per line for reliable low-voltage DC power and signal transmission
- Ready to use with no soldering required on connector side, perfect for prototyping
SKU: n/a -
Accessories
JST Male Connector 2.0mm (6-Pin) (Straight)
- 6-pin JST PH male header connector with 2.0mm pitch for compact PCB designs
- Available in straight (vertical) mounting option
- Through-hole PCB mounting with secure locking system for reliable wire-to-board connections
- Supports up to 2A per pin and 100V DC, ideal for multi-signal and low-power applications
- Perfect for Arduino, ESP32, robotics, drones, sensor arrays, and IoT devices
- Vibration-resistant design with nylon housing and tin-plated brass pins
SKU: n/a -
Accessories
JST Male Connector 2.0mm (5-Pin) (Straight)
- 5-pin JST PH male connector with 2.0mm pitch for compact PCB designs
- Available in straight (vertical) mounting option
- Through-hole PCB mounting for secure mechanical stability
- Compatible with JST PH 2.0mm female housings with locking mechanism
- Ideal for Arduino, ESP32, robotics, drones, and embedded systems
- Rated up to 2A per pin with tin-plated contacts for reliable signal transmission
SKU: n/a
