15cm JST Female Connector Cable 2.0mm Pitch (5-Pin)

Overview

The 15cm JST Female Connector Cable (5-Pin, 2.0mm Pitch) is a compact and reliable pre-crimped wire harness designed for stable multi-signal and low-power DC connections in electronics, robotics, drones, Arduino/ESP32 systems, and sensor-based projects. It uses the standard JST PH 2.0mm 5-pin female connector, widely used in compact embedded systems where multiple signals must be carried in a single connector.

This cable is ideal for power + multiple signal lines (VCC, GND, and 3 signals) in a clean plug-and-play format without requiring soldering on the connector side.

Key Features

• 5-Pin JST PH Female Connector: Supports multi-channel signal and power connections
• 2.0mm Pitch Standard: Compatible with JST PH male headers on PCBs
• 15cm Cable Length: Suitable for compact wiring in embedded systems and robotics
• Plug-and-Play Design: No soldering required for connector interface
• Flexible Insulated Wires: Easy routing in tight electronic assemblies
• Secure Locking Mechanism: Prevents accidental disconnection during operation
• Widely Used Standard: Common in drones, sensors, and control modules

Technical Specifications

• Product Type: JST Pre-Wired Female Connector Cable
• Connector Type: JST PH Female
• Pin Count: 5 Pin
• Pitch: 2.0mm (JST PH Series)
• Cable Length: 15cm
• Wire Type: Stranded copper with PVC insulation
• Typical Wire Gauge: ~22-26 AWG (varies by supplier)
• Current Rating: Up to ~2A per line (typical JST PH specification)
• Voltage Rating: Low-voltage DC systems (commonly up to ~100V depending on implementation)
• Color Coding: Usually multi-color ribbon (varies by batch)
• Operating Temperature: approx. -25°C to +85°C

Working Principle

The cable functions as a direct wire-to-board interface:

• The JST PH 5-pin female connector plugs into a matching 2.0mm male header on a PCB
• Each pin carries an independent electrical path (power or signal)
• The keyed housing ensures correct alignment and prevents reverse connection
• The cable enables stable transmission of multiple signals between modules

Applications

• Arduino and ESP32 development boards
• Robotics and automation systems
• Drone flight controllers and ESC wiring
• Sensor arrays (IMU, IR, ultrasonic, etc.)
• Multi-channel control modules
• Battery-powered embedded systems
• PCB prototyping and electronics projects

Advantages

• Clean multi-wire integration in a single connector
• Fast plug-and-play connectivity
• Reduces soldering effort in prototyping
• Compact and lightweight wiring solution
• Reliable locking for vibration-prone environments

Usage Tips

• Always match with JST PH 2.0mm 5-pin male header
• Verify pin mapping (VCC/GND/signals) before powering circuits
• Do not force insertion – align properly before connecting
• Use strain relief in moving or robotic applications
• Keep within low-voltage DC electronics use only

Note: Images are for Illustration Purposes Only.