The 20cm Female-to-Female Hole-to-Hole Jumper Wires 20pcs or 40pcs Set is designed for fast, reliable solderless connections during prototyping and development. Each jumper features female sockets on both ends to plug directly onto male header pins found on modules, sensors, and development boards such as Arduino, Raspberry Pi, and ESP32.
Key Features
- 20 or 40 female-to-female jumper wires in one convenient kit
- 20cm length for flexible routing across breadboards and modules
- Female sockets on both ends for plug-and-play connectivity
- Assorted colors to simplify wiring and troubleshooting
- Flexible insulated construction for durability and reuse
- Compatible with a wide range of development boards and modules
Technical Specifications
- Quantity: 20 or 40 wires
- Connector type: Female-to-Female (socket to socket)
- Wire length: 20cm (approx. 7.9 inches)
- Insulation: Flexible PVC or similar insulated jacket
- Colors: Assorted (various colors included for identification)
Compatibility and Applications
These female-to-female jumper wires are ideal for a variety of electronics and maker projects:
- Arduino, Raspberry Pi, ESP32 and other microcontroller boards
- Connecting sensors, modules, and breakout boards with male headers
- Breadboard prototyping and circuit testing without soldering
- Educational electronics labs and DIY learning kits
- Robotics, IoT prototypes, and temporary test rigs
Why Choose These 20cm Female-to-Female Jumper Wires
- 20cm length offers extra reach for larger breadboard layouts and tidy wiring.
- Assorted colors make it easy to trace signal, power, and ground lines at a glance.
- Durable connectors and flexible insulation let you reuse the wires across projects.
- Pre-made jumpers save time versus building custom leads or soldering every connection.
Tips for Best Results
- Match colors consistently (e.g., red for VCC, black for GND) to avoid confusion.
- Check header pin alignment before inserting to prevent bent pins.
- Use shorter wires where possible to reduce noise and maintain tidy layouts.
- Store wires by color or bundle to keep your workspace organized.
Note: Images are for Illustration Purposes Only.
Should I buy the 20pcs set or the 40pcs set?
Start with the 40pcs set if you are wiring several sensors and modules at once. Pick the 20pcs set for a single small project or a spare pack in your toolbox. Both sets cost Rs. 80 and use the same 20cm female-to-female wires.
Here is how we see it in the shop:
- 20pcs set: good for one breadboard build, a class exercise or a quick test rig.
- 40pcs set: better when you run power, ground and signal lines to many modules, or when you want spare colors on hand.
Because the wires are reusable, a 40pcs set usually lasts across several projects. If your board has male header pins and your modules also have male pins, you will need male-to-male jumpers instead. Our 20cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs covers that case, and it is also Rs. 80.
Will these fit my Arduino, ESP32 or Raspberry Pi pins?
Yes, in most cases. The female sockets push onto standard male header pins, which is what Arduino, ESP32 and Raspberry Pi boards and most sensor modules use.
Before you order, check three things:
- Your board or module has male pins sticking up. Female-to-female wires need a pin to grip.
- The pin spacing is the standard 0.1 inch header pitch used on common development boards.
- You need a reach of about 20cm between the two points.
If a module has a JST socket instead of bare pins, a jumper wire will not fit it. We stock JST Male Connector 2.54mm (2-Pin) and JST Male Connector 2.54mm (3-Pin) for those builds. Send us a photo of the connector on WhatsApp and we will point you to the right part.
How do I order and what does delivery cost?
Order the 20cm Female-to-Female Jumper Wires online and we ship nationwide across Pakistan. Shipping is a flat Rs. 350 per order, so it pays to add the other parts your project needs in the same order.
We are based on College Road, Rawalpindi. Students building school, college or university projects can visit us for parts and guidance, or message us before ordering if you are unsure which jumper set or connector suits your circuit. Browse the full Jumper Wires and JST Connectors etc. range to build your order in one go.
Frequently Asked Questions
Are these jumper wires sold as 20pcs or 40pcs?
We sell the set in two pack sizes: 20 wires or 40 wires. Both packs contain the same 20cm female-to-female wires with sockets on both ends, in assorted colors. Each pack is Rs. 80. Choose 20pcs for a single small build and 40pcs when you are wiring several modules or want spares.
Can I use female-to-female jumper wires with a breadboard?
Yes, but with one condition. The sockets grip male pins, so plug the wire onto a male header pin on your board or module, and use male-to-male jumpers for the breadboard rows themselves. Many students keep both types in their kit for this reason.
What is the length of each jumper wire?
Each wire is 20cm long, about 7.9 inches. That gives enough reach to route wires neatly across a breadboard and around modules without a tangle. If you need a different length or connector type, message us and we will check what we have in stock.
Do you deliver these jumper wires across Pakistan?
Yes. We deliver nationwide across Pakistan at a flat shipping rate of Rs. 350 per order. We are based on College Road, Rawalpindi, so local customers can also visit the shop. Add your sensors, boards and connectors to the same order to make the shipping go further.
Are the wires reusable across projects?
Yes. The flexible insulated wires and sockets are made to be plugged and unplugged many times. Keep colors consistent, red for power and black for ground, and store each set bundled so the wires stay tidy and ready for your next build.













Anonymous (verified owner) –
Anonymous –
Haseeb (verified owner) –
Haseeb –
Ashir (verified owner) –
Ashir –
Anonymous (verified owner) –
Anonymous –
Hussain Hussain (verified owner) –
Hussain Hussain –
Sughra Javed (verified owner) –
Sughra Javed –
steve cloutier (verified owner) –
steve cloutier –
steve cloutier (verified owner) –
steve cloutier –
wajahat noshairwan (verified owner) –
👍
wajahat noshairwan –