Shop
Showing 16–30 of 1163 resultsSorted by popularity
-
Accessories, Boards, Modules and Accessories
JST Male Connector 2.54mm (2-Pin) (Straight / Right Angle)
Accessories, Boards, Modules and AccessoriesJST Male Connector 2.54mm (2-Pin) (Straight / Right Angle)
– JST Male Connector with 2.54mm pitch for standard PCB and wiring compatibility
– 2-pin configuration ideal for power and signal lines
– Available in straight (vertical) and right-angle (horizontal) mounting
– Durable plastic housing with corrosion-resistant metal contacts
– Compact, lightweight design perfect for Arduino, robotics, RC and prototyping
– Easy to solder or use with crimped wiring harnesses for reliable connectionsSKU: n/a -
Accessories
Spacer – M3 Double-Pass Hexagonal Brass Spacers M3 x (10/15/20/25/30/35/40)mm
– High-strength, corrosion-resistant brass construction
– Precise PCB mounting support to prevent shorts
– Improves airflow and thermal performance
– Double-pass (male-female) M3 threading for stacked PCBs
– Available lengths: 10, 15, 20, 25, 30, 35, 40 mm
– Compatible with M3 screws; ideal for robotics, motherboards, and DIY electronics in PakistanSKU: n/a -
Integrated Circuits (ICs)
555 Timer IC NE555 (DIP)
– Versatile NE555 Timer IC in an easy-to-use 8-pin DIP package
– Operates in monostable, astable, and bistable modes
– Wide supply range: 4.5 V to 15 V for TTL and CMOS compatibility
– High output current to drive LEDs, relays, or small speakers
– Ideal for timers, oscillators, PWM, and audio tone generation
– Stable, reliable performance with minimal external componentsSKU: n/a -
Boards, Modules and Accessories
Li-Ion 3.7V 18650 EVE Rechargeable Battery Cell (2550mAh)
– High-performance Li-Ion 18650 EVE cell, 3.7V 2550mAh capacity
– Rechargeable cylindrical Li-ion battery ideal for high-drain devices
– Unprotected 18650 battery cell suitable for DIY battery packs and PCB builds
– Reliable power for flashlights, power banks, Arduino, robotics and embedded systems
– Compact cylindrical form factor designed for long life and stable current
– Trusted choice for engineers, students, and hobbyistsSKU: n/a -
Integrated Circuits (ICs)
7404 Hex Inverter NOT Gate IC (DIP)
- 7404 Hex Inverter NOT Gate IC with six independent logic inverters
- TTL 74xx family, standard-performance logic for reliable results
- Operates from 4.75 V to 5.25 V (typical 5 V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- High-speed switching for waveform shaping and timing circuits
- Ideal for prototyping, educational labs, and DIY electronics projects
SKU: n/a -
Accessories
26AWG High Quality Red Wire for DIY Projects (1meter)
- Premium 26AWG single-core red wire, 1 meter length
- Pure copper conductor for excellent conductivity and low resistance
- Durable red PVC insulation for polarity identification and protection
- Flexible and easy to route in breadboards, terminals, and small enclosures
- Ideal for Arduino, Raspberry Pi, sensors, prototyping, and STEM projects
- Beginner-friendly: easy to strip, cut, and solder for fast prototyping
SKU: n/a -
Boards, Modules and Accessories, Accessories
400 Tie Points Half Size Solderless Breadboard
– 400 tie points for small-to-medium circuits
– Half-size solderless breadboard ideal for beginners and prototyping
– Dual power rails for easy power distribution
– Nickel-plated contacts for secure, reliable connections
– Durable, heat-resistant ABS plastic housing
– Compatible with Arduino, Raspberry Pi, sensors; reusable and no soldering requiredSKU: n/a -
Integrated Circuits (ICs)
7486 Quad 2-Input XOR Gate IC (DIP)
- Quad 2-input XOR gates in a single DIP-14 package
- Standard TTL logic (74xx) with typical +5V operation
- Fast switching and reliable logic thresholds for digital circuits
- Ideal for parity generation, adders, encoders, and error detection
- Breadboard and PCB friendly DIP-14 package for prototyping
- Interfaces easily with other TTL/CMOS logic with proper level considerations
SKU: n/a -
Accessories, Boards, Modules and Accessories
40 Pin Female Header Strip 2.54mm Pitch
- Durable female header pins for reliable electronic connections.
- Standard 2.54mm (0.1 inch) pitch compatible with breadboards and PCBs.
- Sold in 40-pin strips that can be cut to any length for custom projects.
- Reusable design for non-permanent connections ideal for prototyping and testing.
- Easy through-hole soldering or plug-in installation with male headers.
- Available with optional gold-plated contacts for improved conductivity and corrosion resistance.
SKU: n/a -
Integrated Circuits (ICs)
7474 Dual D-Type Flip-Flop IC (DIP)
- Dual independent edge-triggered D-type flip-flops in a single DIP-14 package.
- Captures and stores the D input on the rising edge of the clock.
- Asynchronous Preset (PR) and Clear (CLR) inputs for forced set/reset.
- Complementary Q and Q9 outputs for true and inverted signals.
- Standard TTL operation at +5V with fast switching and low propagation delay.
- Breadboard and PCB friendly 14-pin DIP, easy interfacing with 74xx logic.
SKU: n/a -
Boards, Modules and Accessories, Accessories
20cm Female-to-Female Hole-to-Hole Jumper Wires Set 20pcs/40pcs
Boards, Modules and Accessories, Accessories20cm Female-to-Female Hole-to-Hole Jumper Wires Set 20pcs/40pcs
- Set of 20 or 40 female-to-female jumper wires for solderless connections.
- Each wire is 20cm long for flexible prototyping.
- Female sockets on both ends to connect male header pins and modules.
- Assorted colors for easy wiring identification and organization.
- Durable, flexible insulated wires—reusable for multiple projects.
- Ideal for Arduino, Raspberry Pi, ESP32, sensors, breadboards and robotics.
SKU: n/a -
Boards and Programmers
ESP32 WiFi + Bluetooth Board Type-C (30 Pin) (Pre-Soldered)
– ESP32-WROOM-32 module with Wi-Fi and Bluetooth (Classic & BLE)
– USB Type-C port for easy programming and power
– 30-pin layout with pre-soldered header pins (breadboard ready)
– Dual-core processor up to 240 MHz for responsive performance
– Integrated PWM, ADC, DAC, UART, SPI, I2C and I2S interfaces
– Compatible with Arduino IDE and MicroPython for fast development
– Ideal for IoT, robotics, automation, data logging and prototypingSKU: n/a -
Boards, Modules and Accessories, Accessories
2-Pin On/Off Rocker Switch (Big)
– SPST 2-pin rocker switch for simple ON/OFF control
– Large rocker actuator for easy, tactile operation
– Snap-in panel mount for fast, secure installation
– Durable plastic body with metal contacts for long life
– Suitable for high-load, low-voltage applications
– Ideal for DIY projects, appliances, automotive and control panelsSKU: n/a -
Accessories
Spacer – M3 Double-Pass Hexagonal Nylon Plastic Spacers M3 x (20/25/30/35/40)mm
– Durable nylon construction: non-conductive, strong, and heat resistant.
– M3 thread compatibility: fits standard M3 screws and bolts for PCB and hardware assembly.
– Available in multiple sizes: 20mm, 25mm, 30mm, 35mm, and 40mm lengths.
– Hexagonal double-pass design: grips tools easily and allows threaded connections on both ends.
– Ideal for PCB mounting and robotics: widely used in drones, Arduino projects, 3D printers, and school kits.
– Lightweight and corrosion-free: rust-proof, shock resistant, and suitable for long-term electronic use.SKU: n/a -
Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 SMD Board with Free USB Cable
– Compact Arduino Uno R3 SMD board with ATmega328P SMD microcontroller
– Free USB Type B cable included for plug-and-play programming
– 14 digital I/O (6 PWM) and 6 analog inputs for sensors and actuators
– Stable 5V operation, supports 7–12V input via barrel jack or USB
– Full Arduino IDE support and compatibility with standard libraries
– Durable surface-mount design ideal for classrooms, kits, and projectsSKU: n/a
