Spacer – M3 Double-Pass Hexagonal Brass Spacers M3 x (10/15/20/25/30/35/40)mm

(2 customer reviews)
Availability:

In stock


– High-strength, corrosion-resistant brass construction
– Precise PCB mounting support to prevent shorts
– Improves airflow and thermal performance
– Double-pass (female-female) M3 threading for stacked PCBs
– Available lengths: 10, 15, 20, 25, 30, 35, 40 mm
– Compatible with M3 screws; ideal for robotics, motherboards, and DIY electronics in Pakistan

WhatsAppChat on WhatsApp

Price range: ₨ 20 through ₨ 70

M3 Brass Spacer Overview

Our M3 double-pass hexagonal brass spacers provide precision spacing, mechanical support, and reliable electrical isolation for PCB assemblies. Made from corrosion-resistant brass, these spacers combine durability with conductivity for long-term performance in industrial and DIY projects.

Key Features of the M3 Hex Spacer

  • Hexagonal body for easy gripping with pliers or wrenches
  • Double-pass (female-female) M3 threading enables secure stacking of boards
  • Corrosion-resistant brass material for long service life
  • Prevents electrical shorts while allowing airflow beneath components
  • Precision-machined for tight tolerances and consistent spacing

Technical Specifications

  • Thread size: M3 (female/female double-pass)
  • Material: Brass (corrosion-resistant)
  • Shape: Hexagonal (for tool engagement)
  • Lengths available: 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm
  • Finish: Natural brass (conductive)

Benefits for Electronics and Mechanical Builds

  • Secure mounting and alignment for PCBs, control panels, and modules
  • Improved cooling by creating a gap for airflow under components
  • Reduced risk of short circuits through reliable insulation and spacing
  • Reusable and easy to install or replace during maintenance and upgrades

Common Applications

  • Raspberry Pi and Arduino projects
  • Motherboards and PC cases
  • Robotics, drones, and automation control boards
  • IoT modules, sensor stacks, and embedded systems
  • Test rigs, CNC assemblies, and electrical enclosures

Installation Tips

  • Hand-start screws to avoid cross-threading before final tightening with a screwdriver or wrench
  • Use the hex body to hold the spacer steady when tightening
  • Pair with M3 screws of appropriate length to ensure secure fastening without protrusion
  • For stacked PCBs, use double-pass threading to join modules directly without extra hardware

Why Choose These M3 Standoff Spacers

These brass hex pillars deliver a balance of electrical conductivity and mechanical strength. They resist rust and wear, offering dependable performance in hobbyist and industrial environments. Precision machining ensures consistent heights across your build, which is critical for multi-board stacks and compact enclosures.

Ordering and Compatibility

Available in seven lengths to fit a wide range of projects. Compatible with standard M3 screws and widely used PCB hole patterns. Ideal choice for engineers, makers, educators, and repair technicians in Pakistan and beyond.

Safety and Maintenance

  • Inspect threads for debris before assembly to prevent damage
  • Keep components dry and free from corrosive chemicals to preserve finish
  • Replace damaged spacers to maintain mechanical stability and electrical safety

Note

Images are for illustration purposes only.

Which length of M3 brass spacer should I order?

Pick the length that matches the gap you need between your board and the mounting surface, or between two stacked boards. Our M3 brass spacers come in 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm and 40 mm, priced at Rs. 15 each.

A few practical rules we share with students:

  • 10 mm to 15 mm: the usual choice for a single Arduino or Raspberry Pi board sitting above a base plate, with room for header pins underneath.
  • 20 mm to 25 mm: good when you are stacking two boards or fitting taller components such as relays or capacitors between them.
  • 30 mm to 40 mm: suited to enclosures, sensor stacks and test rigs where you want more airflow and clearance.

Because these are double-pass (female-female) spacers, you can also join two shorter lengths with an M3 screw to reach a height you do not have in stock. Keep all spacers in one build the same length so the board sits level and screw holes line up. If you are unsure, order a mixed set of lengths and adjust on the bench. You can pair them with small parts like our tactile push button switch or 5mm LEDs when planning a panel layout.

How do I install an M3 brass spacer without damaging the threads?

Start every screw by hand and turn it two or three threads before you reach for a screwdriver. Brass threads are softer than steel, so cross-threading is the main way these spacers get ruined.

  1. Check both ends of the spacer for burrs or debris and blow them out.
  2. Hold the hex body with pliers or a small wrench so it cannot spin while you tighten.
  3. Thread the M3 screw through the PCB first, then into the spacer, and tighten only until the board is firm. Do not over-torque.
  4. For a stacked build, screw the second board into the free end of the same spacer.

Choose screw lengths so the screw does not protrude past the far end of the spacer into another board or a component. If a thread feels tight, back the screw out and restart rather than forcing it. For more mounting hardware, see our Accessories range.

Frequently Asked Questions

What does double-pass mean on these M3 brass spacers?

Double-pass means both ends of the spacer are threaded female, so it is a female-female standoff. You screw an M3 screw into each end. That lets you bolt one end to a chassis and the other to a PCB, or join two boards directly with the spacer between them, without any extra nuts.

Are these brass spacers conductive, and will they short my board?

Brass is conductive, so the spacer itself carries current if it touches a live trace or pad. Keep it under clear board area or use it as a deliberate ground path. The spacer lifts the board off the surface, which creates an air gap and reduces the chance of accidental contact with metal below.

How much does an M3 brass spacer cost and how is it delivered?

Each M3 brass spacer is Rs. 15, in any of the seven lengths from 10 mm to 40 mm. We deliver nationwide across Pakistan at a flat shipping rate of Rs 350. Order the lengths you need for your build and we will pack them together.

Can I use these M3 spacers with Arduino and Raspberry Pi boards?

Yes. Standard Arduino and Raspberry Pi mounting holes take M3 screws, so these spacers fit the usual hole patterns. Match the spacer length to the clearance you need for header pins or add-on boards, and use the same length at every corner so the board sits level.

Spacer's Value

10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm

2 reviews for Spacer – M3 Double-Pass Hexagonal Brass Spacers M3 x (10/15/20/25/30/35/40)mm

  1. Abdul Sami Khan (verified owner) –

    Good quality

    Abdul Sami Khan –

  2. Anonymous (verified owner) –

    Anonymous –

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop