- Accessories, Boards, Modules and Accessories
5mm LEDs (Red, Green, Blue, Yellow, White)
– Compact 5mm LED lights ideal for tight spaces and precision circuits.
– Available in single colors (red, green, blue, white) and RGB options.
– Bright, energy-efficient 5mm LED bulbs with long lifespan.
– Clear and diffused lenses for different lighting effects.
– Perfect for Arduino, Raspberry Pi, robotics, and DIY electronics projects.
– Fast delivery in Islamabad for hobbyists and professionals.SKU: n/a - Boards, Modules and Accessories, Accessories
Tactile Push Button Switch (Big/Small)
– Momentary tactile feedback for reliable user input
– Compact 6mm x 6mm size, ideal for tight spaces
– Durable construction rated for over 100,000 presses
– Easy to integrate with Arduino, Raspberry Pi, and other microcontrollers
– Low contact resistance for stable performance
– Available in multiple colors for visible or coded controlsSKU: n/a - Accessories
1N4007 Rectifier Diode (1000V 1A)
- High reverse voltage: 1000V rating for reliable protection in high-voltage circuits
- Forward current: 1A continuous for general-purpose rectification
- Peak surge capability: 30A single-pulse surge withstand
- Low forward voltage drop: ~1.1V at 1A for efficient power conversion
- Robust DO-41 package with wide temperature range (-55°C to +150°C)
- Ideal for bridge rectifiers, adapters, chargers, and reverse polarity protection
SKU: n/a - Batteries, Cells and Power Supply
Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh)
- Compact 18650 cylindrical cell (18×65 mm) with high energy density for extended runtime.
- Reliable 2000mAh nominal capacity and stable 3.7V output for consistent device performance.
- Long cycle life rated for hundreds of charge/discharge cycles for durable use.
- Built-in safety protections including overcharge, over-discharge, short-circuit and overheat safeguards.
- Low self-discharge for better storage retention and less maintenance charging.
- Lightweight and versatile – suitable for consumer electronics, power tools, EV packs and renewable storage.
SKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
Boards, Modules and Accessories, Accessories20cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
– 20pcs or 40pcs male-to-female jumper wire set
– 20cm length for flexible connections
– Male pin to female socket for versatile interfacing
– Assorted colors for easy circuit identification
– Durable, insulated and reusable leads
– Compatible with Arduino, Raspberry Pi, ESP32 and moreSKU: n/a - Accessories, Boards, Modules and Accessories
MB102 830 Tie Points Solderless Breadboard
– 830 tie-points for flexible prototyping
– Solderless design for quick, mess-free circuit building
– Built-in power rails for clean positive and negative supply wiring
– Compatible with Arduino, Raspberry Pi and standard jumper wires
– Durable, compact and portable — ideal for students, makers and engineers
– Order now from Colgroad for fast delivery in IslamabadSKU: n/a - Integrated Circuits (ICs)
7408 Quad 2-Input AND Gate IC (DIP)
- Four independent 2-input AND gates in a single DIP-14 package
- Standard TTL 74xx family device; operates on 5V supply
- High-speed switching for dependable digital logic performance
- Inputs and outputs compatible with common TTL and CMOS devices
- Breadboard- and PCB-friendly DIP-14 package for easy prototyping
- Ideal for education, lab kits, microcontroller interfacing, and control logic
SKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs
Boards, Modules and Accessories, Accessories20cm Male-to-Male Pin-to-Pin Jumper Wires Set 20pcs/40pcs
- 40pcs or 20pcs male-to-male jumper wire set for breadboard and header connections.
- Each wire measures 20cm for flexible routing and neat layouts.
- Male pins on both ends for easy pin-to-pin connections.
- Assorted colors to simplify wiring and debugging.
- Durable, flexible insulated construction for repeated use.
- Perfect for Arduino, Raspberry Pi, ESP32, prototyping and DIY projects.
SKU: n/a - Accessories
2N2222 NPN Transistor (60V 0.8A)
– General-purpose NPN BJT for switching and amplification
– Collector-Emitter Voltage: 60V
– Collector Current: up to 0.8A
– Fast switching speed, ideal for PWM and digital logic
– Compact TO-92 package for breadboards and PCBs
– Great for robotics, relay drivers, LED and motor controlSKU: n/a - Boards, Modules and Accessories, Accessories
Bullet Connectors Pair in Gold Color (3.5mm)
– 3.5mm male and female gold-plated bullet connectors (pair)
– Low-resistance, high-conductivity connections
– Ideal for brushless motors, ESCs, and LiPo batteries
– Corrosion-resistant, durable gold-plated brass
– Secure snug fit to prevent accidental disconnection
– Easy to solder and install for RC and DIY electronicsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
HC-SR04 Ultrasonic Distance Sensor Module
– Accurate non-contact distance measurement from 2 cm to 400 cm
– High precision with up to 3 mm resolution
– Uses 40 kHz ultrasonic waves for reliable detection
– Easy 4-pin interface (VCC, Trig, Echo, GND); Arduino and Raspberry Pi compatible
– Fast response time (<10 ms) and low power consumption (15 mA)
– Compact, lightweight, and cost-effective for robotics, automation, and DIY projectsSKU: n/a - Integrated Circuits (ICs)
7432 Quad 2-Input OR Gate IC (DIP)
– Quad (4x) independent 2-input OR gates in a single DIP package
– TTL compatible, operates at standard +5V logic levels
– Fast switching and reliable output for digital circuits
– Low power consumption ideal for prototypes and learning
– Breadboard-friendly DIP package for easy prototyping
– Suitable for embedded systems, automation, and educational projectsSKU: n/a - Accessories
BC547 NPN Transistor (50V 0.3A)
- General-purpose NPN BJT in TO-92 package for low-current, medium-voltage circuits.
- Collector-emitter voltage (Vce): 50V, Collector current (Ic): 0.3A maximum.
- DC current gain (hFE) varies by version: A, B, C (approx. 110 to 800).
- Low noise performance ideal for audio preamplifiers and RF circuits.
- Transition frequency around 300 MHz and power dissipation about 500 mW.
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
SG90 9g Micro Servo Motor (180 Degree Rotation)
Boards, Modules and Accessories, Motors, Drivers and WheelsSG90 9g Micro Servo Motor (180 Degree Rotation)
- Small & lightweight — fits tight spaces and lightweight projects
- Precise 180° movement for accurate positioning
- PWM control compatible with Arduino & Raspberry Pi
- Runs on 4.8V–6V (batteries, USB, or adapters)
- Durable build with standard connectors and mounting holes
- Affordable choice for students, hobbyists and educators
SKU: n/a - Boards, Modules and Accessories, Accessories
JST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
Boards, Modules and Accessories, AccessoriesJST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
– Compact JST male connector with 2.54mm pitch and 3-pin configuration
– Available in straight and right-angle PCB mounting styles
– Corrosion-resistant metal contacts and durable plastic housing
– Secure, stable connections for power, ground and signal lines
– Ideal for Arduino, robotics, RC models, sensors and prototyping
– Package includes 1 × JST Male Connector 2.54mm (3-Pin)SKU: n/a - Boards, Modules and Accessories, Accessories
Electromagnetic Active Buzzer 5V (XHXDZ-TMB12A05)
• Model XHXDZ-TMB12A05: Electromagnetic active buzzer, 5V DC
• Built-in oscillation circuit — no external driver required
• Standard 2-pin interface for easy integration
• Produces a clear, continuous tone with low power consumption
• Ideal for alarms, timers, automation, and DIY electronics
• Compatible with Arduino, Raspberry Pi, ESP32 and other controllersSKU: n/a - Accessories, Boards, Modules and Accessories
JST Male Connector 2.54mm (2-Pin) (Straight / Right Angle)
Accessories, Boards, Modules and AccessoriesJST Male Connector 2.54mm (2-Pin) (Straight / Right Angle)
– JST Male Connector with 2.54mm pitch for standard PCB and wiring compatibility
– 2-pin configuration ideal for power and signal lines
– Available in straight (vertical) and right-angle (horizontal) mounting
– Durable plastic housing with corrosion-resistant metal contacts
– Compact, lightweight design perfect for Arduino, robotics, RC and prototyping
– Easy to solder or use with crimped wiring harnesses for reliable connectionsSKU: n/a - Accessories
Spacer – M3 Double-Pass Hexagonal Brass Spacers M3 x (10/15/20/25/30/35/40)mm
– High-strength, corrosion-resistant brass construction
– Precise PCB mounting support to prevent shorts
– Improves airflow and thermal performance
– Double-pass (male-female) M3 threading for stacked PCBs
– Available lengths: 10, 15, 20, 25, 30, 35, 40 mm
– Compatible with M3 screws; ideal for robotics, motherboards, and DIY electronics in PakistanSKU: n/a - Integrated Circuits (ICs)
555 Timer IC NE555 (DIP)
– Versatile NE555 Timer IC in an easy-to-use 8-pin DIP package
– Operates in monostable, astable, and bistable modes
– Wide supply range: 4.5 V to 15 V for TTL and CMOS compatibility
– High output current to drive LEDs, relays, or small speakers
– Ideal for timers, oscillators, PWM, and audio tone generation
– Stable, reliable performance with minimal external componentsSKU: n/a - Boards, Modules and Accessories
Li-Ion 3.7V 18650 EVE Rechargeable Battery Cell (2550mAh)
– High-performance Li-Ion 18650 EVE cell, 3.7V 2550mAh capacity
– Rechargeable cylindrical Li-ion battery ideal for high-drain devices
– Unprotected 18650 battery cell suitable for DIY battery packs and PCB builds
– Reliable power for flashlights, power banks, Arduino, robotics and embedded systems
– Compact cylindrical form factor designed for long life and stable current
– Trusted choice for engineers, students, and hobbyistsSKU: n/a
- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 1973 products sold
- On College Road from 2025
- Owner: College Road Electronics
