Sensors And Modules
Showing 16–30 of 151 resultsSorted by popularity
- Boards, Modules and Accessories, Sensors And Modules
MQ-2 Smoke Gas Sensor Module
- Detects smoke and multiple gases: CO, methane, propane and hydrogen
- Wide detection range from 100 to 10,000 ppm
- Analog 0-5V output proportional to gas concentration
- Fast response time (≤10 seconds) for timely alerts
- Durable design with long service life and stable performance
- 4-pin interface for simple integration with Arduino, Raspberry Pi and microcontrollers
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
SX1278 433MHz LoRa Ra-02 Wireless Module
- LoRa long-range, low-power wireless communication for IoT devices.
- Operates on the 433MHz frequency band for extended range and penetration.
- High sensitivity up to -148dBm for reliable long-distance data links.
- Compact, lightweight design with SPI interface for easy MCU integration.
- Low current consumption, ideal for battery-powered sensors and trackers.
- Supports secure data transmission with built-in encryption capabilities.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-008 5V 650nm Laser Light Sensor Module
– Compact KY-008 laser emitter designed for Arduino and microcontroller projects
– Visible red laser at 650nm for precise beam targeting
– Operates on 5V DC with low current draw (under 40mA)
– Simple 3-pin hookup: VCC, GND, Signal for easy integration
– Small form factor (18.5mm x 15mm) ideal for compact designs
– Suitable for alarms, line-following robots, motion detection, and DIY projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
I2C Bi-Directional Logic Level Converter Module
- Bi-directional level shifting for safe two-way communication between different voltage domains.
- Optimized for I2C but also supports UART, SPI and One-Wire protocols.
- Wide voltage support: converts between 1.8V, 2.8V, 3.3V and 5V logic levels.
- Compact, 4-channel design — space-efficient and ideal for multi-signal projects.
- High-speed operation for reliable, fast data transfer.
- Plug-and-play — no configuration required; protects low-voltage devices from higher voltages.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TCRT5000 IR Line Tracking Sensor Module
– Compact TCRT5000 infrared sensor module for reliable line detection
– Detects black and white surfaces with high precision
– Adjustable sensitivity with onboard potentiometer
– Dual outputs: analog (AO) and digital (DO)
– Wide operating voltage: 3.3V to 5V for Arduino and Raspberry Pi compatibility
– Status indicator LED for real-time detection feedback
– Ideal for robotics, automation, and DIY electronics projectsSKU: n/a - Sensors And Modules
INMP441 High Precision Omindirectional Microphone Module
– INMP441 MEMS digital microphone for high-quality audio capture
– Omnidirectional 360° pickup for consistent sound from all directions
– Direct I2S digital output (no external ADC required)
– High SNR (~61 dBA) and wide frequency response (60 Hz to 15 kHz)
– Compact, low-power design ideal for battery-powered IoT devices
– Compatible with ESP32, Raspberry Pi, and other I2S-supported MCUsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 2-Channel Arduino Relay Module Board
– Dual-channel relay board to control two independent high-power circuits
– Compatible with Arduino, Raspberry Pi, ESP32 and most microcontrollers
– Switches typical loads up to 10A (250VAC / 30VDC) per channel
– Onboard LEDs and screw terminals for secure wiring and status feedback
– Selectable low-level or high-level trigger with opto-isolation jumper for safer interfacing
– Compact PCB footprint ideal for home automation, robotics, IoT, and industrial projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Resistive Soil Moisture Sensor Module
- Accurate moisture detection using conductive probes for reliable readings.
- Both analog voltage output and digital high/low signal for flexible integration.
- Built-in potentiometer to adjust sensitivity and set trigger thresholds.
- Durable, corrosion-resistant probe construction for extended field use.
- Wide power range (3.3V to 5V) for compatibility with Arduino, Raspberry Pi and other boards.
- Ideal for automated irrigation, plant monitoring, gardening and soil research.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
Boards, Modules and Accessories, Sensors And ModulesTEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
- Compact 40 x 40 x 3.6 mm Peltier cooling module
- Rated 12V DC, draws up to 6A for powerful cooling
- Delivers up to 60W cooling with a proper heatsink
- Solid-state ceramic construction for long life and moisture protection
- Cools one side while heating the opposite side for directional thermal control
- Ideal for DIY fridges, PC cooling, lab equipment, sensors, and portable chillers
SKU: n/a - Sensors And Modules, Wireless Communication
NRF24L01 Base Adapter Board Module
– Compact NRF24L01 Base Module for reliable 2.4GHz wireless communication
– Compatible with Arduino and Raspberry Pi via SPI
– Low power consumption ideal for battery-powered projects
– High data rate up to 2 Mbps for fast data transfer
– Effective range up to 100 meters in open space
– Perfect for DIY electronics, sensor networks, robotics; order now in IslamabadSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
LM393 Sound Detection Sensor Module
- High-sensitivity microphone with onboard LM393 comparator for accurate sound detection
- Adjustable sensitivity via built-in potentiometer to tune detection threshold
- Dual outputs: Digital output for threshold triggers and Analog output for raw sound level
- Compact form factor and clear pinout labels for easy connection to microcontrollers
- Low power 5V operation with wide operating temperature range (-20°C to 70°C)
- Great for sound-activated projects, noise monitoring, and interactive installations
SKU: n/a - Sensors And Modules
4×4 Numeric Membrane Switch Keypad Matrix Module
– 4×4 matrix numeric keypad with 16 tactile keys (0-9, A-D, *, #)
– Soft click feedback and durable flexible membrane
– Easy 8-pin header connection for Arduino and Raspberry Pi
– Works from 3.3V to 5V for broad microcontroller support
– Compact size (approx. 70mm x 77mm) ideal for panels and breadboards
– Lightweight and easy to integrate into DIY, automation, and security projectsSKU: n/a - Sensors And Modules
MAX98357 I2S 3W Class-D Audio Amplifier Module
- MAX98357A I2S digital Class-D amplifier for direct digital audio playback
- Up to 3W output power into 4Ω speakers
- Direct I2S input, no external DAC required
- Works with ESP32, Raspberry Pi, Arduino (I2S) and other microcontrollers
- Built-in selectable gain options (3dB to 18dB)
- High efficiency with low distortion and low noise
- Integrated short-circuit and thermal protection, 2.5V to 5.5V supply
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Micro SD Card Reader Module Arduino
- High-speed microSD reader for reliable local storage
- Compatible with Arduino, Raspberry Pi, ESP8266 and ESP32
- SPI interface for fast, stable data logging
- Supports FAT16 and FAT32 microSD cards up to 32GB
- Wide input voltage range: 3.3V to 5V for easy integration
- Compact, robust design ideal for embedded and space-constrained projects
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-022 IR Infrared Receiver Module 38kHz
- High-sensitivity IR detection for reliable remote signal reception.
- Wide receiving angle captures signals from multiple directions.
- Built-in 38kHz demodulation circuit for easy decoding.
- Simple 3-pin interface: VCC, GND, OUT—easy microcontroller integration.
- Compact, low-power design suitable for battery-operated projects.
- Ideal for remote controls, home automation, robotics, and DIY electronics.
SKU: n/a
