Sensors And Modules
Showing 31–45 of 158 resultsSorted by popularity
- Boards, Modules and Accessories, Sensors And Modules
5V 2-Channel Arduino Relay Module Board
– Dual-channel relay board to control two independent high-power circuits
– Compatible with Arduino, Raspberry Pi, ESP32 and most microcontrollers
– Switches typical loads up to 10A (250VAC / 30VDC) per channel
– Onboard LEDs and screw terminals for secure wiring and status feedback
– Selectable low-level or high-level trigger with opto-isolation jumper for safer interfacing
– Compact PCB footprint ideal for home automation, robotics, IoT, and industrial projectsSKU: n/a - Sensors And Modules, Wireless Communication
UBlox NEO-6M GPS Module V2 with Antenna
- High-precision GPS positioning with typical 2.5 meter accuracy.
- Fast satellite acquisition with startup time under 35 seconds in open sky.
- Multi-constellation support: GPS, GLONASS, and Galileo for improved reliability.
- Compact form factor for easy integration into drones, vehicles, and IoT devices.
- UART serial interface (TX/RX) compatible with Arduino, Raspberry Pi and other microcontrollers.
- Built-in antenna for straightforward setup; supports external antenna for challenging reception.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
27mm Piezoelectric Ceramic Brass Disc with Wire (XHXDZ-27MM)
Boards, Modules and Accessories, Sensors And Modules27mm Piezoelectric Ceramic Brass Disc with Wire (XHXDZ-27MM)
- 27mm diameter piezoelectric ceramic disc bonded to a brass base
- Converts AC or pulsed DC electrical signals into audible and ultrasonic sound
- Lightweight, compact design ideal for compact enclosures
- Low power consumption for battery and microcontroller projects
- Commonly used in buzzers, alarms, ultrasonic sensors and DIY sound modules
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
VL53L0X Time-of-Flight (ToF) Laser Ranging Distance Sensor Module V2
Boards, Modules and Accessories, Sensors And ModulesVL53L0X Time-of-Flight (ToF) Laser Ranging Distance Sensor Module V2
- Time-of-Flight (ToF) laser distance sensing up to 2 meters
- High accuracy with up to 1 mm resolution
- Fast measurement rate for real-time applications
- Compact, low-power design ideal for battery projects
- Easy I2C interface for straightforward microcontroller integration
- Reliable performance across varied lighting and reflective surfaces
SKU: n/a - Sensors And Modules
DS18B20 Waterproof Temperature Sensor 1meter Wire
- Waterproof stainless steel DS18B20 probe with 1 m cable for immersion and outdoor use.
- Digital 1-Wire communication lets multiple sensors share a single microcontroller pin.
- Wide operating range -55°C to +125°C with ±0.5°C accuracy (−10°C to +85°C).
- Configurable 9 to 12 bit resolution; supports normal and parasite power modes.
- Compatible with Arduino, ESP32, Raspberry Pi and other development boards.
- Ideal for weather stations, aquariums, soil monitoring, HVAC and industrial applications.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Rain Drops Detection Sensor Module
- High-sensitivity conductive sensing board detects even light raindrops.
- Digital output for simple rain/no-rain detection with microcontrollers.
- Analog output provides a voltage proportional to rain intensity.
- Built-in potentiometer for easy sensitivity adjustment.
- Compact, lightweight design for simple mounting and integration.
- Ideal for weather monitoring, automated irrigation, and environmental projects.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
Boards, Modules and Accessories, Sensors And ModulesTEC1-12706 DC 12V 6A Thermoelectric Cooler Peltier Module
- Compact 40 x 40 x 3.6 mm Peltier cooling module
- Rated 12V DC, draws up to 6A for powerful cooling
- Delivers up to 60W cooling with a proper heatsink
- Solid-state ceramic construction for long life and moisture protection
- Cools one side while heating the opposite side for directional thermal control
- Ideal for DIY fridges, PC cooling, lab equipment, sensors, and portable chillers
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TTP223 Capacitive Touch Sensor Module
- High-sensitivity capacitive touch detection using TTP223 sensor.
- Wide voltage range: 3.3V to 5V, compatible with Arduino and other microcontrollers.
- Digital output: simple VCC, GND, OUT pinout for fast integration.
- Low power consumption, ideal for battery-powered projects.
- Compact low-profile board (approx. 24 x 18 x 3 mm) fits tight spaces.
- Momentary touch switch behavior for touch buttons, keypads, and interactive systems.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Water Level Sensor Module
– High sensitivity sensing using parallel conductors for precise water level detection
– Analog voltage output for easy integration with microcontrollers
– Clear pin labels and simple wiring for quick setup
– Slim, compact, and lightweight design for tight installations
– Corrosion-resistant construction for long-lasting performance
– Ideal for aquariums, water tanks, irrigation systems, and DIY projectsSKU: n/a - Sensors And Modules, Wireless Communication
Mini Solar Panel Plate 6V 160mA 0.96W (110x60mm)
– Compact 6V solar panel rated at 160mA for low-power applications
– Produces approximately 0.96W (marketed as 1W) of output power
– Small 110 x 60 mm form factor for easy integration in DIY projects
– Ideal for battery charging, small solar gadgets, sensors and robotics
– Durable, eco-friendly design built to withstand outdoor use
– Lightweight and affordable option for hobbyists, students and makersSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
KY-022 IR Infrared Receiver Module 38kHz
- High-sensitivity IR detection for reliable remote signal reception.
- Wide receiving angle captures signals from multiple directions.
- Built-in 38kHz demodulation circuit for easy decoding.
- Simple 3-pin interface: VCC, GND, OUT—easy microcontroller integration.
- Compact, low-power design suitable for battery-operated projects.
- Ideal for remote controls, home automation, robotics, and DIY electronics.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Voltage Sensor Module 0-25V DC
- Measures DC voltage from 0 to 25V for broad applications
- Provides proportional 0-5V analog output for microcontrollers
- Simple 3-pin interface (VCC, GND, Signal) for easy wiring
- High accuracy and stability with ±1% precision
- Compact, lightweight design ideal for battery monitoring
- Includes overvoltage protection to safeguard connected devices
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MCP2515 CAN Bus Transceiver Controller Module
– MCP2515 CAN controller for reliable CAN communication
– SPI interface for easy connection to Arduino, Raspberry Pi, STM32 and other microcontrollers
– Supports CAN baud rates up to 1Mb/s with CAN_H and CAN_L outputs
– LED indicators for power, Tx and Rx activity; compact PCB for enclosure mounting
– DB9-compatible output plus screw terminal and header pins for flexible wiring
– Ready for use with popular open-source libraries and quick setup guidesSKU: n/a - Sensors And Modules
MAX30102 SPO2 Pulse Oximeter Heart Rate Sensor Module
- Accurate heart rate and SpO2 monitoring using red and IR LEDs
- Dual-LED design (660nm red and 940nm infrared) for precise readings
- I2C digital interface for easy integration with microcontrollers
- Low power consumption ideal for battery-powered wearables
- Compact, lightweight module suited for fitness trackers and medical devices
- Configurable sampling rates and LED currents to balance performance and power
SKU: n/a - Sensors And Modules
TTP223B Digital Capacitive Blue Touch Sensor Module
- Capacitive touch sensor module with TTP223B IC for reliable touch detection without mechanical buttons
- Digital HIGH/LOW output signal for seamless microcontroller interfacing with Arduino, ESP32, and other platforms
- Ultra-low power consumption (3-5µA active, 1.5µA standby) ideal for battery-powered applications
- Wide operating voltage range of 2.0V to 5.5V DC with fast 60ms response time
- Configurable modes including momentary and toggle operation via onboard solder pads
- Compact 24 x 24 mm blue PCB design with auto-calibration for easy integration
SKU: n/a














