Boards, Modules and Accessories
Showing 271–285 of 618 resultsSorted by popularity
- Boards, Modules and Accessories
Raspberry Pi 5 Cooling Fan with Aluminum Heatsink
– Custom-fit cooling fan designed specifically for Raspberry Pi 5
– Includes an aluminum heatsink for rapid heat dissipation
– Silent operation for noise-sensitive environments
– Easy, fast installation with thermal pad and mounting pins
– Compact, durable design fits most cases and tight builds
– Prevents thermal throttling to maintain peak Pi 5 performance
– Ideal for gaming, AI tasks, servers, classrooms, and home projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MQ-135 Air Quality Control Gas Sensor Module
– Detects a wide range of gases including ammonia, benzene and smoke
– High sensitivity with fast response for real-time air quality monitoring
– Analog (0-5V) and configurable digital output for threshold alerts
– Onboard potentiometer for adjustable sensitivity and calibration
– Compact, low-power module with standard pin headers for easy MCU integration
– Ideal for air purifiers, HVAC, industrial safety and IoT air quality projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
ADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
Boards, Modules and Accessories, Sensors And ModulesADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
• 16-bit high-resolution ADC for ultra-precise measurements
• 4 analog input channels (single-ended) or 2 differential channels
• Built-in programmable gain amplifier (PGA) for amplifying weak signals
• I2C interface for easy connection to Arduino, Raspberry Pi, and ESP boards
• Low power consumption suitable for battery-powered projects
• Onboard comparator for real-time monitoring and alertsSKU: n/a - Accessories
103 10nF 10,000pF 0.01μF Non-Polar Ceramic Capacitor
- Capacitance Value: 10,000pF (10nF / 0.01μF) with 103 marking code
- Non-Polarized Design: Can be connected in any orientation for easy installation
- Stable Ceramic Dielectric: Reliable performance across wide range of applications
- Compact Through-Hole Package: Perfect for PCB mounting and breadboard use
- Ideal for High-Frequency Applications: RF circuits, oscillators, and signal coupling
- Low Leakage Current: Suitable for timing circuits, noise filtering, and decoupling
SKU: n/a - Accessories
JST Male Connector 2.54mm (6-Pin) (Straight / Right Angle)
- 6-Pin JST Male Connector with standard 2.54mm pitch for wire-to-board interfacing
- Available in two mounting styles: Straight (Vertical) and Right Angle (90° Horizontal)
- PCB-mount header design with polarized keying to prevent reverse insertion
- Compatible with Arduino, ESP32, robotics, motor drivers, and embedded systems
- Through-hole soldering with tin-plated pins, rated up to 3A per pin and 250V
- Ideal for electronics prototyping, sensor interfacing, and drone applications
SKU: n/a - Boards and Programmers
ESP32 C3 Super Mini Development Board (HW-566AB)
• Ultra-compact IoT development board (22.5 × 18 mm) with ESP32-C3 RISC-V processor
• Built-in Wi-Fi 802.11 b/g/n (2.4GHz) and Bluetooth 5.0 LE connectivity
• USB Type-C interface for direct programming and power without external USB-to-serial adapter
• 4MB flash memory, 400KB SRAM, and up to 160MHz clock speed
• Low power consumption with deep sleep current around 43µA, ideal for battery-operated projects
• 11-22 GPIO pins with UART, SPI, I2C, PWM, and ADC interfaces for versatile applications
• Perfect for IoT devices, smart home automation, wearables, and embedded systemsSKU: n/a - Sensors And Modules
SW6206 QC 4 PD3.0 22.5W Fast Charging Power Bank Module
- 22.5W high-power fast charging output with PD3.0 and QC4+ support
- Compatible with Apple, Samsung, Huawei, Xiaomi smartphones and USB devices
- USB-C and USB-A output ports for universal device compatibility
- Integrated battery protection system with over-voltage and thermal protection
- High efficiency boost conversion up to 95% with low heat generation
- Perfect for DIY power banks and portable battery pack projects
SKU: n/a - Accessories
Hex Brass Shaft Coupler for DC Motors 30mm Length (5-6mm)
– Precision hex brass coupler for reliable torque transfer
– Fits 5 mm and 6 mm round shafts
– 30 mm overall length for stable shaft engagement
– Positive non-slip hex profile for secure alignment
– Set screw fastening for adjustable, firm grip
– Ideal for robotics, encoders, wheels and DIY projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
PCF8574 I2C Expansion Board Adapter Module
- Adds 8 bidirectional digital I/O pins via I2C to microcontrollers.
- Uses PCF8574 I2C I/O expander chip for reliable GPIO expansion.
- Compatible with Arduino, ESP32, ESP8266, and Raspberry Pi.
- Configurable I2C addresses allow multiple modules on one bus.
- Wide operating voltage: 2.5V to 6V for 3.3V and 5V systems.
- Ideal for LCDs, keypads, sensor arrays, relay control, and robotics.
SKU: n/a - Boards, Modules and Accessories
TCS34725 RGB Color Sensor Module
- High-accuracy TCS34725 RGB color sensor module with digital color recognition.
- Built-in IR blocking filter for precise color readings under mixed lighting.
- Integrated white LED for consistent illumination and ambient light measurement.
- I2C communication for easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Compact TCS34725 sensor breakout board ideal for robotics, smart lighting, and embedded projects.
- Perfect for students, engineers, and hobbyists—available to buy online in Pakistan.
SKU: n/a - Boards, Modules and Accessories
CJMCU-9548 TCA9548A 8-Channel I2C Expansion Board
– Expand one I2C bus to 8 independent channels with the TCA9548A multiplexer.
– Compatible with Arduino, Raspberry Pi, and most microcontrollers.
– Resolve I2C address conflicts and connect multiple identical sensors or displays.
– Compact CJMCU-9548 breakout for easy integration in robotics, IoT, and embedded projects.
– Simple control via I2C commands; supports up to 8 devices with minimal interference.
– Ideal for prototyping, labs, and industrial automation in Pakistan.SKU: n/a - Boards, Modules and Accessories
Pixhawk 2.4.8 32-Bit Flight Arm Controller Kit for Drone
– Professional-grade flight control for drones, UAVs, and robotics
– Open-source firmware support: ArduPilot and PX4 for full customization
– Built-in IMU with gyroscope, accelerometer, and HMC5883L magnetometer for accurate navigation
– GPS waypoint navigation and long-range telemetry support for autonomous missions
– High-performance STM32F427 processor with I2C, UART, CAN, and PWM interfaces
– Compact, lightweight design with failsafe, redundancy, and extensible ports for GPS, cameras, and gimbalsSKU: n/a - Boards, Modules and Accessories
ZMPT101B AC Voltage Sensor Module Single Phase
– High-precision ZMPT101B AC voltage sensor module for Arduino and microcontroller projects.
– Accurate AC voltage measurement for home automation, energy monitoring, and IoT systems.
– Easy analog output compatible with Arduino ADC (requires simple calibration).
– Compact, robust module ideal for DIY electronics and industrial monitoring.
– Simple wiring: VCC, GND and analog output to ADC pin for fast integration.
– Available to buy online in Pakistan for fast delivery and reliable performance.SKU: n/a - Boards, Modules and Accessories
AC-DC Power Supply Adapter 24V 1A
- Compact 24V 1A AC-DC adapter for LED strips, mini motors, routers, and small electronics.
- Stable 24V DC output for clean, consistent power delivery.
- Built-in over-voltage and over-current protection to safeguard devices.
- Durable casing with plug-and-play setup for easy replacement or upgrade.
- Perfect for DIY projects, automation kits, and home gadgets requiring 24V input.
- Lightweight, space-saving design fits tight installations and workbenches.
SKU: n/a
