The 1.44 Inch SPI TFT Non-Touch Display Screen Module (128×128) is a compact and vibrant full-color LCD display ideal for embedded systems, Arduino projects, and microcontroller applications. Featuring a 128×128 pixel resolution and powered by the ST7735 driver IC, this module delivers crisp, clear visuals despite its small size.
It uses a Serial Peripheral Interface (SPI) for communication, reducing pin usage and allowing for fast refresh rates and smooth graphics performance. This non-touch display is perfect for projects that require visual feedback such as data loggers, sensor dashboards, and compact monitoring systems.
Features:
- Display Size: 1.44 inches (diagonal)
- Resolution: 128 × 128 pixels
- Display Type: Full-color TFT LCD
- Touchscreen Type: Non-Touch
- Display Controller IC: ST7735
- Interface Type: SPI (Serial Peripheral Interface)
- Color Depth: 65K colors (16-bit RGB)
- Operating Voltage: 3.3V – 5V compatible
- Backlight: White LED for bright display output
- Viewing Angle: Wide and clear visual performance
- Compact Design: Suitable for portable and small embedded systems
- Low Power Consumption: Ideal for battery-powered projects
- Library Support: Compatible with Adafruit_ST7735, TFT_eSPI, and similar libraries
- Version: Non-touch variant for basic graphical display applications
Applications:
- Compact data display units
- IoT devices and sensor modules
- Mini control panels and portable monitors
- Robotics and embedded systems
- DIY electronic and educational projects
- Wearable device prototypes
Specifications:
- Screen Size: 1.44 inches
- Resolution: 128 × 128 pixels
- Display Controller: ST7735
- Interface: SPI (4-wire)
- Touch Type: Non-touch
- Color Depth: 65K (16-bit RGB)
- Operating Voltage: 3.3V – 5V
- Backlight Type: White LED
- Operating Temperature: -20°C to +70°C
- Module Dimensions: Approx. 40mm × 35mm × 7mm
Note: Images are for Illustration Purposes Only.
Which 1.44 Inch SPI TFT Display should I pick for my project?
Pick the 1.44 Inch SPI TFT Display when you want a small full-color screen with graphics, and pick a monochrome OLED when you only need text and want the lowest power draw. Both run from the same microcontrollers.
A quick comparison of the display modules we stock:
| Module | Resolution | Colors | Best for |
|---|---|---|---|
| 1.44 Inch SPI TFT Display | 128×128 | 65K full color | Color graphics, gauges, icons, dashboards |
| 0.96 Inch 128×64 I2C OLED Display Module | 128×64 | Monochrome | Tiny wearables, text readouts, low power |
| 1.3 Inch 128×64 OLED Display Module | 128×64 | Monochrome | Dashboards, IoT status screens |
| 16×2 LCD Display with I2C Module | 16×2 characters | Text only | Menus, sensor values, simple status lines |
If your project needs color bars, graphs or small images, the TFT is the right choice. If it runs on a coin cell or you only print numbers, an OLED or LCD uses fewer pins and less power. You can see the full range in Display Modules and LCDs.
How do I wire and install the 1.44 Inch SPI TFT Display?
The module uses a 4-wire SPI interface, so it needs power plus a handful of signal pins. Wire it to 3.3V or 5V, connect the SPI lines to your board, then load a library such as Adafruit_ST7735 or TFT_eSPI.
- Connect VCC and GND first. The module accepts 3.3V to 5V.
- Wire the SPI pins: SCK, MOSI (SDA), CS, DC and RESET. MISO is not used for this display.
- Connect the backlight pin if your breakout exposes it separately.
- Install Adafruit_ST7735 or TFT_eSPI, set the driver to ST7735 and the resolution to 128×128, then run a test sketch.
Keep the wires short on breadboards, and use a level shifter if your board runs at 3.3V and you power the module at 5V. The 40mm x 35mm x 7mm module fits small enclosures, so plan the cutout before you solder headers.
Price, warranty and delivery in Pakistan
The 1.44 Inch SPI TFT Display is priced at Rs. 1,000, checked in September 2026. College Road Electronics is based on College Road, Rawalpindi and delivers nationwide across Pakistan at a flat shipping rate of Rs 350.
Students get parts and guidance for school, college and university projects, so you can ask for help with wiring or library setup when you order. Stock is available, and the same order can include sensors, motors or a controller board for your build.
Frequently Asked Questions
What driver chip does the 1.44 Inch SPI TFT Display use?
It uses the ST7735 driver IC with a 4-wire SPI interface. That is why libraries such as Adafruit_ST7735 and TFT_eSPI support it directly. Set the driver to ST7735 and the resolution to 128×128 in your sketch, and the display should start drawing text and graphics after a simple test.
Can I use this TFT display with Arduino, ESP32 and Raspberry Pi?
Yes. It works with Arduino boards, ESP32 and Raspberry Pi because it only needs SPI pins plus power. The module accepts 3.3V to 5V, so most common boards can drive it. Use the Adafruit_ST7735 or TFT_eSPI library on Arduino and ESP32, and the usual SPI setup on Raspberry Pi.
Is this a touchscreen display?
No. This is the non-touch version, so it only shows output. If your project needs buttons or touch input, add separate push buttons or a touch module. For plain data display, gauges, icons and sensor dashboards, the non-touch module keeps wiring simple and costs less than a touch panel.
What can I build with a 128×128 SPI TFT display?
Common builds include sensor dashboards, data loggers, mini control panels, portable monitors, robotics status screens and wearable prototypes. The 128×128 resolution suits icons, bar graphs, small charts and short text lines. Its low power draw and compact 40mm x 35mm x 7mm size make it a good fit for battery-powered and handheld projects.














Reviews
There are no reviews yet