-13%

1-Digit 7-Segment Common Cathode LED Display (RED)

(1 customer review)
Availability:

In stock


– Compact 1-digit 7-segment LED display (common cathode)
– Bright red digits with low power consumption
– Easy to interface with Arduino, Raspberry Pi, ESP32, PIC
– Standard 10-pin through-hole DIP package
– Typical forward voltage ~1.8–2.2V per segment; 10–20mA current
– Ideal for clocks, counters, timers, meters, and DIY projects

WhatsAppChat on WhatsApp

₨ 35 ₨ 40

In stock

Factory tested, sent sealed Film your unboxing so we can quickly replace anything damaged, missing or wrong. Returns, refunds and warranty

The 1-Digit 7-Segment Common Cathode LED Display is a compact, single-digit numeric display used in counters, clocks, timers, meters, and many DIY and embedded projects. It contains seven individual LED segments labeled a through g arranged to form the digit 8. By selectively powering segments, you can display numbers 0 to 9 and several alphabetic characters. The common cathode configuration ties all segment cathodes to a single ground pin, making it straightforward to drive from microcontrollers and typical driver ICs.

Why choose this 1-digit 7-segment common cathode display?

  • Simple common cathode wiring for direct microcontroller control or driver IC use
  • Bright, clear red illumination with low power consumption and long life
  • Standard through-hole 10-pin DIP package for easy prototyping and PCB mounting
  • Compatible with Arduino, ESP32, Raspberry Pi, PIC, and popular driver ICs like 4026 and 4511

Key Features

  • Compact 1-digit 7-segment LED display in common cathode configuration
  • 7 segments plus optional decimal point (DP)
  • Low power, solid-state construction for long lifespan
  • Wide viewing angle and bright red digits (standard color)
  • Easy interfacing with microcontrollers, transistors, or dedicated driver ICs

Specifications

  • Type: 1-digit 7-segment LED display
  • Configuration: Common cathode
  • Digit count: 1
  • Segment count: 7 (plus optional decimal point)
  • Pin count: 10 pins (standard DIP)
  • Color: Red (standard; other colors may be available by model)
  • Operating voltage (per segment): ~1.8V to 2.2V (typical for red)
  • Forward current (per segment): 10mA to 20mA
  • Digit height: ~0.36 to 0.56 inches (varies by model)
  • Package size: Standard 5mm pitch DIP package
  • Viewing angle: Wide, clear visibility
  • Mounting: Through-hole

Pinout and Wiring Tips

In a common cathode 7-segment display, all cathode pins are connected to ground. Each anode controls one segment and should be driven through a current-limiting resistor from your microcontroller or driver. Typical wiring steps:

  • Connect the common cathode pin(s) to GND.
  • Connect each segment anode (a, b, c, d, e, f, g, DP) to a microcontroller pin or driver output through a resistor.
  • Choose resistor values to set segment current: R = (Vcc – Vf) / I. Example: for 5V supply, Vf~1.9V, I = 10mA, R ≈ (5 – 1.9) / 0.01 = 310 ohms. Use 330 ohms for safe operation.

Driving Options

  • Direct drive from microcontroller GPIO pins (use resistors and ensure current limits are respected)
  • Use driver ICs such as 4026, 4511, or 7447 for simplified counting and multiplexing
  • Use NPN transistor or MOSFET arrays for higher current or multiplexed multi-digit displays
  • For low-pin-count control, consider shift registers or LED driver ICs with current limiting

Applications

  • Digital clocks and timers
  • Counter circuits and scoreboards
  • Calculators and measurement displays (voltmeters, frequency meters)
  • Arduino, ESP32, Raspberry Pi, and PIC learning projects
  • Embedded systems, DIY electronics, and student engineering projects

Mounting and Packaging

This 1-digit 7-segment common cathode display is supplied in a standard through-hole 10-pin DIP package for simple PCB insertion or breadboard prototyping. Check digit height and pin arrangement for your model when planning mounting or enclosures.

Ordering Notes

Images and sample units are for illustration purposes only. Actual product color, digit height, brightness, or pin arrangement may vary slightly between batches or manufacturers. Contact your supplier for specific model variants or color options.

What is included when I order this display?

Each order is one single-digit display module, packed as a standard through-hole part. Here is what you get:

  • One 1-Digit 7-Segment Common Cathode LED Display with red digits
  • 7 segments (a to g) plus a decimal point (DP)
  • 10-pin through-hole DIP package for breadboard or PCB mounting

The price is Rs. 35 per display. Current-limiting resistors and jumper wires are not part of the package, so add them to your order if you are building from scratch. If you need a batch for a class or a project group, message us and we will confirm stock and pricing.

Should I pick common cathode or common anode for my project?

Pick common cathode if you want each segment to switch on with a HIGH signal from your microcontroller. Pick common anode if your circuit switches segments with a LOW signal or you are working with driver ICs built around that logic.

On this common cathode display, all segment cathodes share one ground pin. Each anode drives one segment through a resistor, so a HIGH output lights it. That suits direct GPIO drive from Arduino, ESP32, Raspberry Pi or PIC, and driver ICs such as the 4026 or 4511. If your existing board or code expects active-LOW segments, our 1-Digit 7-Segment Common Anode LED Display is the matching part at the same price.

Not sure which one your circuit needs? Send us a photo of your wiring or your code and we will point you to the right version.

How do I install and wire it without damaging the display?

Solder it into a PCB or push it into a breadboard, then wire the shared cathode pin to GND and each segment anode to a pin through a resistor. Never connect a segment straight to a supply rail without a resistor.

  1. Identify pin 1 and the shared cathode pins before soldering.
  2. Connect the common cathode pin or pins to GND.
  3. Wire segments a to g and DP to your microcontroller or driver outputs, each through a current-limiting resistor.
  4. Keep soldering time short and use a normal iron temperature so the plastic body and pins stay intact.
  5. Test one segment at a time before mounting the board in an enclosure.

For a 5V supply with a typical 1.9V forward voltage at 10mA, a 330 ohm resistor per segment is a safe starting point. If you are planning a multi-digit counter or clock, our Display Modules and LCDs range includes other options you can compare.

Frequently Asked Questions

How much does the 1-Digit 7-Segment Common Cathode LED Display cost in Pakistan?

It is Rs. 35 per display at our shop on College Road, Rawalpindi. Delivery is nationwide across Pakistan at a flat-rate shipping charge of Rs 350. If you are ordering several units for a class project or a batch build, message us with the quantity and we will confirm current stock and pricing.

Can I drive this display directly from an Arduino or ESP32?

Yes. Because it is common cathode, each segment lights when its anode gets a HIGH signal. Connect the shared cathode to GND, then run each segment pin to a GPIO through a current-limiting resistor. Keep segment current within the 10mA to 20mA range and you can drive it without a separate driver IC.

What resistor should I use with this 7-segment display?

Work it out as R = (Vcc – Vf) / I. For a 5V supply, a forward voltage of about 1.9V and 10mA per segment, that gives roughly 310 ohms, so a 330 ohm resistor per segment is a safe choice. On a 3.3V board the value is lower, so recalculate before wiring.

Do you deliver this display outside Rawalpindi?

Yes, we ship nationwide across Pakistan at a flat-rate shipping charge of Rs 350. Students ordering parts for school, college or university projects can also ask us for wiring guidance. Send us your circuit details on WhatsApp and we will help you choose the right display and confirm delivery details.

Can I use this single-digit display for a multi-digit counter or clock?

Yes, but you need one display per digit. Wire each digit’s segments to the same microcontroller pins and switch between digits quickly, or use a driver IC such as the 4026 or 4511 for counting. For a wider screen with text, our 16×2 LCD Display with I2C Module is another option we stock.

1 review for 1-Digit 7-Segment Common Cathode LED Display (RED)

  1. Anonymous (verified owner) –

    Anonymous –

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop