Shop
Showing 106–120 of 1164 resultsSorted by popularity
-
Intermediate Electronics Kits
4WD Acrylic Robot Car Chassis
– High-torque 4WD robot car chassis built for rugged and indoor terrain
– Imported acrylic frame with metal supports for strength and low weight
– Four DC geared motors and rubber-tread multi-terrain wheels
– Universal board support: Arduino, Raspberry Pi, NodeMCU and more
– Spacious, optimized layout for sensors, batteries, drivers and AI modules
– Ideal for STEM education, AI rovers, autonomous navigation and hobby buildsSKU: n/a -
Boards and Programmers, Boards, Modules and Accessories
ESP32-CAM WiFi and Bluetooth Board with OV2640 Camera Module
Boards and Programmers, Boards, Modules and AccessoriesESP32-CAM WiFi and Bluetooth Board with OV2640 Camera Module
- 2MP OV2640 camera for sharp, high-resolution images
- Built-in Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + BLE)
- Powerful ESP32-S dual-core LX6 CPU at 160/240 MHz
- 4MB PSRAM and 8MB Flash plus MicroSD slot (up to 4GB)
- Multiple GPIOs with UART, SPI, I2C and PWM interfaces
- Compact 40mm x 27mm form factor and low power consumption
SKU: n/a -
Accessories
2-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Charges 2 cylindrical lithium-ion cells at once with independent slots
– Compatible with 16340, 14500, and 18650 batteries
– Modern USB Type-C input for universal compatibility and durable connection
– Smart charging with auto-adjust current, smart cut-off, and LED status indicators
– Multiple safety protections: overcharge, short-circuit, over-discharge recovery, overheat, and reverse polarity
– Compact, lightweight ABS construction with spring-loaded contacts for secure fitSKU: n/a -
Boards, Modules and Accessories, Accessories
10cm JST Female Connector Cable 2.54mm Pitch (3-Pin)
– Ready-to-use 3-pin JST female connector with 100mm pre-attached wires
– Compatible with 3-pin JST male connectors (2.54mm pitch)
– Flexible, durable insulation and high-conductivity copper cores
– Ideal for Arduino, sensors, servos, LEDs, drones, robotics, and RC models
– Plug-and-play connection for fast prototyping and repairs
– Provides secure, stable signal and power transmissionSKU: n/a -
Intermediate Electronics Kits
2WD Acrylic Robot Car Chassis
– Compact 2WD robot car chassis ideal for beginners and hobbyists
– Durable transparent acrylic base plate for secure mounting
– Includes two DC geared motors, two wheels and a caster wheel
– Universal compatibility with Arduino, Raspberry Pi and motor drivers
– Easy assembly with nuts, screws and motor mounts included
– Great starter platform for line following, obstacle avoidance and STEM projectsSKU: n/a -
Integrated Circuits (ICs)
ULN2003 Stepper Motor Driver IC (DIP)
– 7 Darlington transistor arrays in one DIP IC
– Each channel sinks up to 500 mA and withstands 50 V
– Built-in freewheeling diodes for inductive load protection
– Open-collector outputs compatible with TTL and CMOS
– Standard DIP package ideal for breadboards and prototyping
– Ideal for stepper motors, relays, solenoids, and LED driversSKU: n/a -
Boards, Modules and Accessories
1x 18650 Battery Case Single Cell Holder
– Secure connection keeps a single 18650 battery safe and reliable
– Ideal for DIY projects like power banks, flashlights, and robotics
– Affordable, value-for-money 18650 battery holder
– Versatile use in electronics projects and home automation
– Easy to install with standard mounting holes
– Durable construction for repeated useSKU: n/a -
Boards, Modules and Accessories, Motors, Drivers and Wheels
TB6612FNG Dual Stepper Motor Driver Module (Pre-Soldered)
Boards, Modules and Accessories, Motors, Drivers and WheelsTB6612FNG Dual Stepper Motor Driver Module (Pre-Soldered)
– Compact dual H-bridge driver for two DC motors or one bipolar stepper motor
– Operating voltage: 2.5V to 13.5V
– Peak output current: 3.2A per channel with thermal shutdown protection
– Low standby current and efficient operation to reduce heat
– Easy-to-read pinout and breakout board for fast wiring
– Compatible with Arduino, Raspberry Pi, and most microcontrollers
– Includes datasheet and wiring guide for quick setupSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
35mm Piezoelectric Ceramic Brass Disc (XHXDZ-35MM)
Boards, Modules and Accessories, Sensors And Modules35mm Piezoelectric Ceramic Brass Disc (XHXDZ-35MM)
– 35mm piezoelectric ceramic disc with brass backing
– Brass plate bonded to piezoelectric ceramic layer
– Converts AC or pulsed DC signals into audible or ultrasonic sound
– Compact, lightweight and easy to mount in housings or PCBs
– Low power consumption ideal for buzzers and sensors
– Perfect for Arduino, microcontroller and DIY electronics projectsSKU: n/a -
Integrated Circuits (ICs)
7490 Decade Counter IC (DIP)
– 4-bit binary decade counter that counts from 0 to 9
– Configurable as divide-by-2, divide-by-5, or divide-by-10
– TTL compatible with fast switching and asynchronous master reset inputs
– Packaged in a standard DIP for easy breadboard and PCB prototyping
– Ideal for clocks, timers, frequency dividers, and seven-segment display driversSKU: n/a -
Boards, Modules and Accessories, Boards and Programmers
ESP32 S3 44Pin Terminal Adapter Expansion Breakout Module
Boards, Modules and Accessories, Boards and ProgrammersESP32 S3 44Pin Terminal Adapter Expansion Breakout Module
– Breaks out all 44 ESP32-S3 pins into labeled screw terminals
– Secure, solderless connections for sensors, actuators, and modules
– Clearly labeled GPIO, power (3.3V/5V), and GND connections
– Compact, durable PCB design for prototyping and permanent installations
– Ideal for IoT, home automation, robotics, and industrial projects
– Enables rapid wiring, easy maintenance, and quick module swapsSKU: n/a -
Boards, Modules and Accessories, Accessories
Small Dotted Veroboard (6.4cm x 14.5cm)
- Compact 6.4cm x 14.5cm dotted veroboard for small projects
- Pre-perforated copper tracks for easy soldering and reliable connections
- Perfect for DIY electronics, Arduino projects, and circuit prototyping
- Simple to use—ideal for hobbyists, students, and engineers
- Durable construction suitable for repeated soldering and adjustments
- Great for LED circuits, sensors, motor control, and rapid prototyping
SKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories
2x 18650 Battery Case Cell Holder
- Holds two 18650 lithium-ion batteries side by side for compact battery packs.
- Spring-loaded contacts for secure, reliable electrical connection.
- No soldering required thanks to solder-free terminals and easy installation.
- Compact, lightweight design ideal for portable electronics and handheld projects.
- Durable ABS construction with mounting options for flexible installation.
- Versatile use in DIY, prototyping, consumer electronics, and emergency power solutions.
SKU: n/a -
Accessories
Mini DC Motor 3-Blade Propeller Fan
– Compact, lightweight mini DC motor paired with a 3-blade propeller
– High-speed performance delivers noticeable airflow in small designs
– Low power consumption; runs from batteries or low-voltage DC sources
– Easy propeller attachment for smooth, balanced rotation
– Ideal for DIY electronics, school science experiments, and demonstrations
– Great for small cooling systems, RC projects, and ventilation in enclosuresSKU: n/a -
Boards, Modules and Accessories, Accessories
2-Pin JST SM Connector Wire Cable Pair (2.54mm Pitch)
– 2-Pin JST SM male and female connector pair for quick connections.
– Standard 2.54mm pitch for broad compatibility with PCBs and modules.
– Pre-attached red (positive) and black (negative) wires for easy wiring.
– Secure locking design prevents accidental disconnections.
– Wire length approximately 15 to 20 cm per side for flexible placement.
– Durable plastic housing and reliable pin alignment for long-lasting use.SKU: n/a
