Shop
Showing 346–360 of 1164 resultsSorted by popularity
-
BMS Modules and Accessories
2S 7.4V 8A Li-Ion Cell BMS Charging Protection Module
– Supports 2S (7.4V) Li-Ion / Li-Po battery packs
– 8A continuous discharge current for medium-power devices
– Overcharge and over-discharge protection to extend cell life
– Overcurrent and short-circuit protection with automatic recovery
– Built-in cell balancing to maintain equal cell voltages
– Compact PCB design for easy installation in DIY projectsSKU: n/a -
Integrated Circuits (ICs)
CD4511 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD input into 7-segment outputs for LED displays
– CMOS design with low power consumption and wide supply range (3V to 15V)
– Includes LE (Latch Enable), LT (Lamp Test), and BI (Blanking Input) control pins
– Directly drives common cathode 7-segment LED displays without extra drivers
– Available in easy-to-use DIP-16 package for breadboard and PCB integration
– Ideal for clocks, counters, calculators, and other numeric display systemsSKU: n/a -
Integrated Circuits (ICs)
74139 Dual 1-of-4 Decoder/Demultiplexer IC (DIP)
– Dual 2-to-4 decoder/demultiplexer (two independent sections)
– Active-LOW, mutually exclusive outputs for clear chip-selects
– Separate enable inputs for each decoder for independent control or cascading
– TTL-compatible inputs; typical 5V operation with fast switching
– Breadboard-friendly DIP-16 package for prototyping and labs
– Ideal for address decoding, data routing, and control logicSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
PCF8574 I2C Expansion Board Adapter Module
- Adds 8 bidirectional digital I/O pins via I2C to microcontrollers.
- Uses PCF8574 I2C I/O expander chip for reliable GPIO expansion.
- Compatible with Arduino, ESP32, ESP8266, and Raspberry Pi.
- Configurable I2C addresses allow multiple modules on one bus.
- Wide operating voltage: 2.5V to 6V for 3.3V and 5V systems.
- Ideal for LCDs, keypads, sensor arrays, relay control, and robotics.
SKU: n/a -
Boards, Modules and Accessories
TCS34725 RGB Color Sensor Module
- High-accuracy TCS34725 RGB color sensor module with digital color recognition.
- Built-in IR blocking filter for precise color readings under mixed lighting.
- Integrated white LED for consistent illumination and ambient light measurement.
- I2C communication for easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Compact TCS34725 sensor breakout board ideal for robotics, smart lighting, and embedded projects.
- Perfect for students, engineers, and hobbyists—available to buy online in Pakistan.
SKU: n/a -
Boards, Modules and Accessories
CJMCU-9548 TCA9548A 8-Channel I2C Expansion Board
– Expand one I2C bus to 8 independent channels with the TCA9548A multiplexer.
– Compatible with Arduino, Raspberry Pi, and most microcontrollers.
– Resolve I2C address conflicts and connect multiple identical sensors or displays.
– Compact CJMCU-9548 breakout for easy integration in robotics, IoT, and embedded projects.
– Simple control via I2C commands; supports up to 8 devices with minimal interference.
– Ideal for prototyping, labs, and industrial automation in Pakistan.SKU: n/a -
Boards, Modules and Accessories
Pixhawk 2.4.8 32-Bit Flight Arm Controller Kit for Drone
– Professional-grade flight control for drones, UAVs, and robotics
– Open-source firmware support: ArduPilot and PX4 for full customization
– Built-in IMU with gyroscope, accelerometer, and HMC5883L magnetometer for accurate navigation
– GPS waypoint navigation and long-range telemetry support for autonomous missions
– High-performance STM32F427 processor with I2C, UART, CAN, and PWM interfaces
– Compact, lightweight design with failsafe, redundancy, and extensible ports for GPS, cameras, and gimbalsSKU: n/a -
Boards, Modules and Accessories
ZMPT101B AC Voltage Sensor Module Single Phase
– High-precision ZMPT101B AC voltage sensor module for Arduino and microcontroller projects.
– Accurate AC voltage measurement for home automation, energy monitoring, and IoT systems.
– Easy analog output compatible with Arduino ADC (requires simple calibration).
– Compact, robust module ideal for DIY electronics and industrial monitoring.
– Simple wiring: VCC, GND and analog output to ADC pin for fast integration.
– Available to buy online in Pakistan for fast delivery and reliable performance.SKU: n/a -
Boards, Modules and Accessories
AC-DC Power Supply Adapter 24V 1A
- Compact 24V 1A AC-DC adapter for LED strips, mini motors, routers, and small electronics.
- Stable 24V DC output for clean, consistent power delivery.
- Built-in over-voltage and over-current protection to safeguard devices.
- Durable casing with plug-and-play setup for easy replacement or upgrade.
- Perfect for DIY projects, automation kits, and home gadgets requiring 24V input.
- Lightweight, space-saving design fits tight installations and workbenches.
SKU: n/a -
Boards, Modules and Accessories
DC SPDT 5-Pin Relay 6V / 12V
– Compatible with both 5V and 12V DC control voltages
– Available in SPDT and DPDT contact configurations
– Durable copper coil and robust casing for long life
– Strong contact rating to handle moderate to high loads
– Compact form factor for PCB and relay module integration
– Ideal for Arduino projects, automotive circuits, and automationSKU: n/a -
Boards, Modules and Accessories
Fast Charging Adapter Module Type-C USB PD65W DC8-32V 3.25A 65W
– Up to 65W Power Delivery output for rapid device charging
– USB Type-C PD with 3.25 A output for phones, tablets, and laptops
– Wide DC8-32V input for car, truck, and RV use
– Built-in surge protection and temperature control for safe charging
– Slim, durable aluminum alloy housing, weighs just 45 g for easy travel
– Universal USB C compatibility reduces cable clutter and supports many devicesSKU: n/a -
Boards, Modules and Accessories, Display Modules and LCDs
16×4 Green LCD Character Display Module
- 16×4 alphanumeric LCD module with green backlight for clear visibility
- Displays 4 rows of 16 characters for organized text output
- Available in I2C and SPI versions for flexible communication
- Easy integration with Arduino and Raspberry Pi projects
- Ideal for DIY electronics, data loggers, status monitors, and sensor displays
- Durable, affordable, and beginner-friendly for students and hobbyists
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
ADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
Boards, Modules and Accessories, Sensors And ModulesADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
• 16-bit high-resolution ADC for ultra-precise measurements
• 4 analog input channels (single-ended) or 2 differential channels
• Built-in programmable gain amplifier (PGA) for amplifying weak signals
• I2C interface for easy connection to Arduino, Raspberry Pi, and ESP boards
• Low power consumption suitable for battery-powered projects
• Onboard comparator for real-time monitoring and alertsSKU: n/a -
Boards and Programmers, Boards, Modules and Accessories
Arduino Mega 2560 With Logo (Original) with Free USB Cable
Boards and Programmers, Boards, Modules and AccessoriesArduino Mega 2560 With Logo (Original) with Free USB Cable
- Original Arduino Mega 2560 with logo for authentic performance
- Free USB cable included for easy connection and programming
- 54 digital I/O pins and 16 analog inputs for large projects
- Powered by the ATmega2560 microcontroller for reliable processing
- Compatible with a wide range of Arduino shields and accessories
- Ideal for robotics, home automation, industrial control, and prototyping
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
Speed Measuring Sensor Module (LM393)
– High-precision optical speed detection using the LM393 comparator
– Adjustable sensitivity with onboard potentiometer for varying surfaces and light
– Clean digital pulse output for easy microcontroller interfacing
– Compact design with simple GPIO connections and mounting holes
– Ideal for robotics, motor control, RPM monitoring and feedback systems
– Operates from 5V and works in temperatures from -20°C to 70°CSKU: n/a
