The 100μF 16V Electrolytic Polarized Capacitor is a general-purpose aluminum electrolytic capacitor designed for electronic circuits requiring moderate capacitance and voltage filtering. With a capacitance of 100μF and a maximum rated voltage of 16V DC, it is commonly used for power supply filtering, voltage smoothing, signal coupling, and energy storage applications.
As a polarized capacitor, it must be connected with the correct positive and negative polarity. It is suitable for use in power supplies, Arduino projects, audio circuits, control circuits, DIY electronics, and general-purpose electronic repairs.
Key Features
- Capacitance: 100μF
- Rated voltage: 16V DC
- Polarized electrolytic capacitor
- Aluminum electrolytic construction
- Suitable for DC filtering and smoothing
- Useful for power supply applications
- Compact through-hole component
- Suitable for PCB assembly and prototyping
- Useful for electronics repair and DIY projects
Technical Specifications
- Component Type: Electrolytic Capacitor
- Capacitance: 100μF
- Rated Voltage: 16V DC
- Polarity: Polarized
- Construction: Aluminum Electrolytic
- Mounting Type: Through-Hole
- Application: Filtering, smoothing, coupling, and energy storage
- Polarity Marking: Negative terminal is marked on the capacitor body
- Voltage Type: DC
Working Principle
A capacitor stores electrical energy in an electric field between its internal electrodes. The 100μF capacitance determines its ability to store charge.
In power supply circuits, this capacitor can help smooth voltage fluctuations and reduce unwanted ripple. It can also temporarily supply or absorb charge when the circuit voltage changes, helping stabilize the power supply.
Because it is polarized, the capacitor must be installed with the positive and negative terminals connected correctly. Reversing the polarity can cause the capacitor to overheat, leak, or fail.
Applications
- DC power supply filtering
- Voltage smoothing
- Ripple reduction
- Arduino and microcontroller projects
- Audio circuits
- Amplifier circuits
- Motor driver circuits
- Electronic control circuits
- Power supply decoupling
- DIY electronics projects
- PCB repair and replacement
- General-purpose electronic circuits
Advantages
- 100μF capacitance provides useful energy storage
- 16V voltage rating suitable for many low-voltage DC circuits
- Effective for power supply filtering and smoothing
- Compact and easy to install
- Widely useful in electronics projects
- Suitable for prototyping and PCB repair
- Polarized design clearly indicates connection orientation
Usage Tips
- Always observe the polarity when installing the capacitor.
- Connect the positive terminal to the positive side of the circuit and the negative terminal to the negative side.
- Do not exceed the 16V rated voltage.
- Check the capacitor’s polarity markings before soldering.
- Allow the capacitor to discharge before handling or replacing it in a powered circuit.
- Use a capacitor with an appropriate voltage rating for the application.
- Keep the capacitor away from excessive heat during soldering.
Note: Images are for Illustration Purposes Only.
How do I choose the right capacitor for my circuit?
Match the capacitance value to your circuit’s needs and pick a voltage rating at least 20% higher than the maximum voltage in your design. For a 12V supply, a 16V capacitor is the minimum; 25V or higher is safer.
Consider these points when selecting a capacitor:
- Capacitance: 100μF suits power supply filtering, smoothing, and audio coupling. For low-frequency decoupling, 10μF to 100μF works well.
- Voltage rating: The 16V DC rating is fine for 5V, 9V, and 12V circuits. Never exceed 16V.
- Polarity: Electrolytic capacitors are polarized. If your circuit may reverse voltage, use a non-polarized type instead.
- Size and mounting: This through-hole capacitor fits standard PCB holes and breadboards.
For higher voltage needs, see the 10μF 50V Electrolytic Polarized Capacitor. For resistor selection, browse Metal Film Resistors (1kΩ – 10MΩ) (1/4 Watt) or Metal Film Resistors (1Ω – 820Ω) (1/4 Watt). Find more passives in the Resistors, Capacitors, Inductors etc. category.
What should I check before installing this capacitor?
Before soldering, confirm the polarity marking on the capacitor body. The negative stripe indicates the negative lead. Connect the positive lead to the more positive point in the circuit.
Follow these steps for safe installation:
- Discharge the capacitor if it was previously used. Use a resistor to avoid a spark.
- Identify the positive and negative holes on your PCB or breadboard.
- Insert the capacitor with the negative stripe aligned to the negative side.
- Solder quickly to avoid heat damage. Keep the iron on the joint for no more than a few seconds.
- Check for solder bridges and trim excess leads.
Reversing polarity can cause the capacitor to overheat, leak, or fail. If you are unsure, test the circuit with a low voltage first.
Frequently Asked Questions
What is the price of the 100μF 16V electrolytic polarized capacitor?
The 100μF 16V electrolytic polarized capacitor is priced at Rs. 10. This price was checked in October 2026. It is a low-cost component suitable for prototyping and repairs. Order online for delivery across Pakistan.
Can I use this capacitor for Arduino projects?
Yes, this capacitor is commonly used in Arduino and microcontroller projects for power supply filtering, voltage smoothing, and decoupling. Its 16V rating is safe for 5V and 12V circuits. Just observe polarity when connecting it to your board or breadboard.
What happens if I connect this capacitor backwards?
Connecting a polarized capacitor backwards can cause it to overheat, leak, or fail. The negative terminal is marked on the capacitor body. Always match the negative stripe to the negative side of the circuit. If unsure, double-check before applying power.
Do you deliver this capacitor across Pakistan?
Yes, College Road Electronics delivers nationwide across Pakistan with flat-rate shipping of Rs. 350. The capacitor is in stock and can be shipped to your address. Delivery times vary by location, but orders are processed promptly.












Hamza Sajid (verified owner) –
Hamza Sajid –