Jumper Wires and JST Connectors etc.
Showing 16–30 of 34 resultsSorted by popularity
- Jumper Wires and JST Connectors etc.
26AWG High Quality Black Wire for DIY Projects (1meter)
– 26AWG single-core black wire, 1 meter length
– Pure copper conductor for reliable conductivity
– Flexible PVC insulation for durability and safe handling
– Ideal for breadboards, Arduino, Raspberry Pi, and small electronics
– Easy to strip and solder, beginner-friendly for prototyping
– Perfect for jumpers, repairs, sensor modules, and internal wiringSKU: n/a - Jumper Wires and JST Connectors etc.
2-Pin JST SM Connector Wire Cable Pair (2.54mm Pitch)
– 2-Pin JST SM male and female connector pair for quick connections.
– Standard 2.54mm pitch for broad compatibility with PCBs and modules.
– Pre-attached red (positive) and black (negative) wires for easy wiring.
– Secure locking design prevents accidental disconnections.
– Wire length approximately 15 to 20 cm per side for flexible placement.
– Durable plastic housing and reliable pin alignment for long-lasting use.SKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.0mm Pitch (4-Pin)
- JST PH 4-Pin Female Connector with 2.0mm pitch for multi-signal and power connections
- 15cm cable length ideal for compact robotics, drones, and embedded systems
- Plug-and-play design with no soldering required on connector side
- Compatible with JST PH male headers on Arduino, ESP32, and PCB modules
- Secure locking mechanism prevents accidental disconnection during operation
- Flexible insulated wires rated up to 2A per line for low-voltage DC applications
SKU: n/a - Jumper Wires and JST Connectors etc.
10cm Male-to-Female Pin-to-Hole Jumper Wires Set 20pcs/40pcs
- 10cm male-to-female jumper wires with pre-crimped pin and socket ends
- Available in 20pcs and 40pcs sets
- Fits standard 2.54mm header pins and breadboards
- No soldering needed for standard pin-header connections
- Multiple colours for easy circuit identification
- For Arduino, ESP32, Raspberry Pi, sensors and robotics
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.54mm (5-Pin) (Straight / Right Angle)
– JST Male Connector with 2.54mm pitch for standard PCB headers
– 5-pin configuration supports multiple signal or low-power lines
– Available in straight (vertical) and right-angle (horizontal) orientations
– Durable metal contacts and high-quality plastic housing for reliable conductivity
– Compact form factor ideal for Arduino, robotics, drones, RC models, and sensors
– Easy to solder or crimp into PCB headers, wiring harnesses, and prototyping boardsSKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.0mm (2-Pin) (Straight)
- JST PH 2.0mm 2-pin male connector for wire-to-board PCB connections
- Available in straight mounting orientations
- Compact 2.0mm pitch design ideal for drones, robotics, and battery systems
- Secure keyed locking mechanism ensures proper polarity and reliable connection
- Through-hole mounting with tin-plated copper pins and nylon housing
- Rated for up to 2A current and 100V DC, operating temperature -25°C to +85°C
- Perfect for Arduino, ESP32, sensors, and embedded electronics projects
SKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.0mm Pitch (2-Pin)
- Pre-wired JST PH 2.0mm 2-pin female connector cable for plug-and-play electronics connections
- 15cm cable length ideal for compact Arduino, ESP32, drone, and robotics projects
- Compatible with Li-ion/LiPo batteries, sensors, motor drivers, and electronic modules
- Features secure locking fit with flexible insulated wires (typically 22-26 AWG)
- Rated up to 2A per line for reliable low-voltage DC power and signal transmission
- Ready to use with no soldering required on connector side, perfect for prototyping
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.0mm (4-Pin) (Straight)
- JST PH 2.0mm 4-pin male header connector for PCB mounting
- Available in straight (vertical) configuration
- Compact 2.0mm pitch design ideal for high-density circuit boards
- Secure locking mechanism with keyed housing prevents misconnection
- Through-hole mounting provides excellent mechanical stability
- Perfect for Arduino, ESP32, drones, robotics, and battery systems
- Rated for up to 2A per pin with reliable electrical contacts
SKU: n/a - Jumper Wires and JST Connectors etc.
2-Pin JST RCY Connector Wire Cable Pair (2.54mm Pitch)
- 2-Pin JST RCY male and female connector pair for secure DC connections.
- Standard 2.54mm pitch for broad compatibility.
- Pre-attached red (positive) and black (negative) wires for correct polarity.
- Approx. 15–20cm wire length per side for flexible placement.
- Snap-fit locking mechanism to prevent accidental disconnections.
- Compact, lightweight and durable housing for repeated use.
SKU: n/a - Jumper Wires and JST Connectors etc.
40-Wire Colored Flat Ribbon Cable Jumper Wires (1 foot) (2.54mm Pitch)
Jumper Wires and JST Connectors etc.40-Wire Colored Flat Ribbon Cable Jumper Wires (1 foot) (2.54mm Pitch)
- 40 individually insulated conductors in a flat ribbon layout with standard 2.54mm pitch
- 1 foot (30.5cm) cable length, perfect for breadboard and development board connections
- Color-coded wires for quick signal identification and easy troubleshooting
- Flexible construction allows neat routing inside project enclosures and around modules
- Compatible with Arduino, Raspberry Pi, ESP32, pin headers, and IDC connectors
- Can be split for single or multi-pin connections in prototyping and robotics projects
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.54mm (6-Pin) (Straight / Right Angle)
- 6-Pin JST Male Connector with standard 2.54mm pitch for wire-to-board interfacing
- Available in two mounting styles: Straight (Vertical) and Right Angle (90° Horizontal)
- PCB-mount header design with polarized keying to prevent reverse insertion
- Compatible with Arduino, ESP32, robotics, motor drivers, and embedded systems
- Through-hole soldering with tin-plated pins, rated up to 3A per pin and 250V
- Ideal for electronics prototyping, sensor interfacing, and drone applications
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.0mm (6-Pin) (Straight)
- 6-pin JST PH male header connector with 2.0mm pitch for compact PCB designs
- Available in straight (vertical) mounting option
- Through-hole PCB mounting with secure locking system for reliable wire-to-board connections
- Supports up to 2A per pin and 100V DC, ideal for multi-signal and low-power applications
- Perfect for Arduino, ESP32, robotics, drones, sensor arrays, and IoT devices
- Vibration-resistant design with nylon housing and tin-plated brass pins
SKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.54mm Pitch (6-Pin)
- 6-pin JST female connector cable with standard 2.54mm pitch for universal compatibility
- 15cm cable length ideal for compact electronics projects and robotics applications
- Female-to-female design for easy plug-and-play connection to PCB headers
- Multi-core stranded copper wire construction for reliable signal and power transmission
- Perfect for Arduino, ESP32, sensors, motor drivers, and embedded systems
- Secure locking fit prevents accidental disconnection during operation
SKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.0mm Pitch (6-Pin)
• 6-pin JST PH female connector cable with 2.0mm pitch for multi-signal connections
• 15cm pre-wired cable assembly – plug-and-play design, no soldering required
• Compatible with JST PH male headers on Arduino, ESP32, and embedded PCBs
• Ideal for robotics, drones, sensor arrays, and motor control interfaces
• Secure locking mechanism prevents accidental disconnection during operation
• Flexible multi-core wires with up to 2A per line current rating
• Perfect for compact internal wiring in electronics and automation projectsSKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.0mm (3-Pin) (Straight)
- 3-pin JST PH male header connector with compact 2.0mm pitch for high-density PCB designs
- Available in straight (vertical) mounting orientations
- Through-hole PCB mounting with secure locking interface for stable wire-to-board connections
- Rated up to 2A per pin, ideal for signal and low-power DC applications
- Perfect for Arduino, ESP32, drones, robotics, sensors, and battery-powered devices
- Features nylon housing with tin-plated brass pins for reliable electrical performance
SKU: n/a












