Sensors And Modules
Showing 31–45 of 152 resultsSorted by popularity
-
Boards, Modules and Accessories, Sensors And Modules
Rain Drops Detection Sensor Module
- High-sensitivity conductive sensing board detects even light raindrops.
- Digital output for simple rain/no-rain detection with microcontrollers.
- Analog output provides a voltage proportional to rain intensity.
- Built-in potentiometer for easy sensitivity adjustment.
- Compact, lightweight design for simple mounting and integration.
- Ideal for weather monitoring, automated irrigation, and environmental projects.
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
MCP2515 CAN Bus Transceiver Controller Module
– MCP2515 CAN controller with TJA1050 transceiver for reliable CAN communication
– SPI interface for easy connection to Arduino, Raspberry Pi, STM32 and other microcontrollers
– Supports CAN baud rates up to 1Mb/s with CAN_H and CAN_L outputs
– LED indicators for power, Tx and Rx activity; compact PCB for enclosure mounting
– DB9-compatible output plus screw terminal and header pins for flexible wiring
– Ready for use with popular open-source libraries and quick setup guidesSKU: n/a -
Sensors And Modules
INMP441 High Precision Omindirectional Microphone Module
– INMP441 MEMS digital microphone for high-quality audio capture
– Omnidirectional 360° pickup for consistent sound from all directions
– Direct I2S digital output (no external ADC required)
– High SNR (~61 dBA) and wide frequency response (60 Hz to 15 kHz)
– Compact, low-power design ideal for battery-powered IoT devices
– Compatible with ESP32, Raspberry Pi, and other I2S-supported MCUsSKU: n/a -
Sensors And Modules, Wireless Communication
NRF24L01 Base Adapter Board Module
– Compact NRF24L01 Base Module for reliable 2.4GHz wireless communication
– Compatible with Arduino and Raspberry Pi via SPI
– Low power consumption ideal for battery-powered projects
– High data rate up to 2 Mbps for fast data transfer
– Effective range up to 100 meters in open space
– Perfect for DIY electronics, sensor networks, robotics; order now in IslamabadSKU: n/a -
Sensors And Modules, Wireless Communication
Mini Solar Panel Plate 6V 160mA 0.96W (110x60mm)
– Compact 6V solar panel rated at 160mA for low-power applications
– Produces approximately 0.96W (marketed as 1W) of output power
– Small 110 x 60 mm form factor for easy integration in DIY projects
– Ideal for battery charging, small solar gadgets, sensors and robotics
– Durable, eco-friendly design built to withstand outdoor use
– Lightweight and affordable option for hobbyists, students and makersSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
8-Channel IR Reflectance Sensor Array (QTR-8RC)
– Eight infrared reflectance sensors for reliable line detection
– High-precision tracking for smooth robotic navigation
– Easy integration with Arduino and common microcontrollers
– Adjustable sensitivity for varying surfaces and lighting
– Compact, durable design ideal for competitions, research, and education
– Cost-effective solution for hobbyists, students, and professionalsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Module V2
Boards, Modules and Accessories, Sensors And ModulesVL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Module V2
- Time-of-Flight (ToF) laser distance sensing up to 2 meters
- High accuracy with up to 1 mm resolution
- Fast measurement rate for real-time applications
- Compact, low-power design ideal for battery projects
- Easy I2C interface for straightforward microcontroller integration
- Reliable performance across varied lighting and reflective surfaces
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
5V 8-Channel Arduino Relay Module Board
- Control up to 8 independent devices from one microcontroller or PLC
- Jumper-selectable isolation to separate relay power (JD-VCC) from logic power (VCC)
- LED status indicators for each channel for quick diagnostics
- TTL trigger inputs compatible with 3.3V and 5V controllers (Arduino, Raspberry Pi, ESP32)
- Secure screw terminals and header pins for load and signal connections
- Compact PCB with mounting holes; typical relay rating up to 10A per channel (verify datasheet)
SKU: n/a -
Sensors And Modules
MAX98357 I2S 3W Class-D Audio Amplifier Module
- MAX98357A I2S digital Class-D amplifier for direct digital audio playback
- Up to 3W output power into 4Ω speakers
- Direct I2S input, no external DAC required
- Works with ESP32, Raspberry Pi, Arduino (I2S) and other microcontrollers
- Built-in selectable gain options (3dB to 18dB)
- High efficiency with low distortion and low noise
- Integrated short-circuit and thermal protection, 2.5V to 5.5V supply
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
ACS712 Hall Effect Current Sensor Module 20A
- Measures AC and DC currents up to ±20A
- Output sensitivity: 100 mV/A for easy ADC conversion
- Safe galvanic isolation using Hall effect sensing
- Compatible with Arduino, ESP32, STM32 and Raspberry Pi
- Low-noise analog output and compact PCB design
- Operating voltage: 5V DC
- Ideal for robotics, power monitoring and automation
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
Water Level Sensor Module
– High sensitivity sensing using parallel conductors for precise water level detection
– Analog voltage output for easy integration with microcontrollers
– Clear pin labels and simple wiring for quick setup
– Slim, compact, and lightweight design for tight installations
– Corrosion-resistant construction for long-lasting performance
– Ideal for aquariums, water tanks, irrigation systems, and DIY projectsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
Micro SD Card Reader Module Arduino
- High-speed microSD reader for reliable local storage
- Compatible with Arduino, Raspberry Pi, ESP8266 and ESP32
- SPI interface for fast, stable data logging
- Supports FAT16 and FAT32 microSD cards up to 32GB
- Wide input voltage range: 3.3V to 5V for easy integration
- Compact, robust design ideal for embedded and space-constrained projects
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
BMP280 Barometric Pressure Sensor Module
- High-precision pressure, temperature and altitude measurements
- Pressure range 300–1100 hPa; temperature accuracy ±1°C
- I2C and SPI interfaces for easy integration with Arduino and Raspberry Pi
- Compact, lightweight design ideal for tight spaces
- Low power consumption for battery-powered and portable systems
- Durable and reliable for weather stations, drones, robotics and industrial use
SKU: n/a -
Sensors And Modules
MAX30102 SPO2 Pulse Oximeter Heart Rate Sensor Module
- Accurate heart rate and SpO2 monitoring using red and IR LEDs
- Dual-LED design (660nm red and 940nm infrared) for precise readings
- I2C digital interface for easy integration with microcontrollers
- Low power consumption ideal for battery-powered wearables
- Compact, lightweight module suited for fitness trackers and medical devices
- Configurable sampling rates and LED currents to balance performance and power
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
AD8232 ECG Monitoring Heart Sensor Module Kit
• Single-lead AD8232 ECG front-end for accurate heartbeat signal acquisition
• Low-power operation ideal for battery-powered and wearable projects
• Compact PCB with gold-plated pads and labeled connectors for easy setup
• Compatible with Arduino, Raspberry Pi, and most microcontrollers
• Reduces motion artifacts for clearer ECG data in mobile applications
• Great for students, DIY developers, biomedical projects, and IoT health solutionsSKU: n/a
