Mini Round Shape Speaker 8Ω 1W — Overview
The Mini Round Shape Speaker 8Ω 1W is a compact audio transducer designed for hobbyists, makers, educators, and engineers building low-power sound applications. With an 8-ohm impedance and a 1-watt power rating, this small round speaker produces clear, intelligible sound for notifications, voice prompts, and simple audio playback where space and power are limited.
Key Features & Specifications
- Impedance: 8Ω (ohms)
- Rated Power: 1W
- Shape: Round, compact form factor
- Lightweight construction for easy mounting and integration
- Clear mid/high frequency response suitable for voice and effects
- Simple two-wire connection — easy to wire to amplifiers or microcontroller driver circuits
Benefits
- Compact size frees up PCB and enclosure space for other components.
- Low power requirement makes it ideal for battery-powered and portable projects.
- Clear voice and sound-effect reproduction improves user feedback in devices.
- Broad compatibility with Arduino, Raspberry Pi, ESP modules, and small audio amplifiers.
- Easy to replace or upgrade in toys, alarms, and educational kits.
Applications & Use Cases
This speaker is well suited to a wide range of small-scale audio tasks, including:
- Arduino and Raspberry Pi sound output — buzzers, alerts, and simple audio players
- Talking robots and interactive voice-enabled gadgets
- Toys and games that require sound effects or short audio clips
- Alarm and notification systems in DIY security or sensor projects
- Portable electronic projects, prototypes, and educational electronics kits
Compatibility & Integration Tips
- Works directly with low-power audio amplifiers (verify amplifier drive capability).
- For best volume and sound quality, pair with a small 1–3W amplifier module when used with microcontrollers.
- Observe correct polarity when wiring to avoid phase cancellation in multi-speaker setups.
- Mount using double-sided tape, small screws, or standoffs depending on your enclosure.
Technical Notes & Safety
- Rated for 1W continuous; avoid driving the speaker at higher power levels to prevent damage.
- Acoustic output is optimized for near-field and small-enclosure use — not intended for high-fidelity hi‑fi applications.
- Handle with care to avoid denting the cone or magnet assembly.
Note: Images are for illustration purposes only.
What should I check before buying the Mini Round Shape Speaker 8Ω 1W?
The Mini Round Shape Speaker 8Ω 1W is a small, low-power part, so the main checks are amplifier match, mounting space and how you will wire it. It suits voice prompts, alerts and short sound clips, not loud music.
- Amplifier match: the speaker is rated 8Ω and 1W. Pair it with a small amplifier module that can drive an 8Ω load, and keep the output within 1W to avoid damage.
- Size and mounting: the round body is compact and lightweight. Check the inside of your enclosure, then fix it with double-sided tape, small screws or standoffs. Leave a little air space so the cone is not pressed against a surface.
- Wiring: it uses a simple two-wire connection. Watch polarity, especially if you use more than one speaker, because reversed wiring causes phase cancellation and weaker sound.
- Power source: the low power draw suits battery-powered and portable builds, so it works well in handheld and wearable projects.
- Project extras: many student builds also need Metal Film Resistors (1kΩ – 10MΩ) (1/4 Watt), 5mm LEDs (Red, Green, Blue, Yellow, White and Red/Blue) and a Tactile Push Button Switch (Big/Small) for indicators and controls.
The speaker is priced at Rs. 100, checked in September 2026, and it is in stock. College Road Electronics is based on College Road, Rawalpindi, delivers nationwide across Pakistan at a flat rate of Rs 350, and helps students with parts and guidance for school, college and university projects. Browse more parts in the Accessories category.
Frequently Asked Questions
What is the price of the Mini Round Shape Speaker 8Ω 1W in Pakistan?
The Mini Round Shape Speaker 8Ω 1W is priced at Rs. 100 at College Road Electronics, checked in September 2026. It is in stock. Delivery is nationwide across Pakistan at a flat shipping rate of Rs 350, so you can order it along with other small parts for your project.
Can I connect this 8Ω 1W speaker directly to an Arduino or ESP32?
Not directly for good volume. A microcontroller pin cannot drive a speaker properly, so use a small amplifier module that can handle an 8Ω load and stay within 1W. The speaker then works well for alerts, voice prompts and short sound clips in Arduino, Raspberry Pi and ESP projects.
Will a 1W speaker be loud enough for my project?
It is loud enough for near-field use, such as notifications, alarms, talking robots and toys. It is not meant for high-fidelity audio or a large room. For more volume, use a small amplifier module rated for an 8Ω load and keep the drive within the 1W rating to protect the speaker.
Does College Road Electronics deliver this speaker across Pakistan?
Yes. College Road Electronics is based on College Road, Rawalpindi, and delivers nationwide across Pakistan at a flat rate of Rs 350. Students also get parts and guidance for school, college and university projects, so you can ask for help choosing matching amplifiers and components.













Anonymous (verified owner) –
Anonymous –
Anonymous (verified owner) –
Anonymous –