Shop
Showing 61–75 of 1176 resultsSorted by popularity
- Accessories
Hot Glue Gun Rods/Sticks (Big/Small)
– Premium hot glue sticks for both big and mini glue guns
– Smooth, even melting with minimal stringing
– Strong, fast-setting bond on wood, plastic, fabric, cardboard and more
– Compatible with most standard and mini hot glue guns
– Clean application for crafts, repairs, electronics and DIY projects
– Easy to use for hobbyists, students and professionalsSKU: n/a - Integrated Circuits (ICs)
L293D Dual H-Bridge Motor Driver IC (DIP)
– L293D Dual H-Bridge Motor Driver IC in a 16-pin DIP package for easy prototyping
– Drives 2 DC motors or 1 stepper motor with independent direction control
– Bidirectional motor control (forward and reverse) with PWM speed input
– Up to 600mA continuous output per channel, 1.2A peak
– Wide supply voltage range: 4.5V to 36V
– Built-in clamp diodes for back EMF protection; TTL/CMOS compatible inputsSKU: n/a - Boards, Modules and Accessories, Boards and Programmers
Arduino Nano V3 Board Type-C (Pre-Soldered)
– Pre-soldered header pins for immediate plug-and-play use
– USB Type-C port for modern power and data connectivity
– Built-in ATmega328P microcontroller for reliable performance
– Compatible with Arduino IDE, CH340 driver, and Nano shields
– Ideal for robotics, IoT, embedded systems, and classroom projects
– Compact form factor for tight spaces and fast prototypingSKU: n/a - Integrated Circuits (ICs)
74151 8-Input Multiplexer IC (DIP)
– High-speed 8-input multiplexer from the 74-series TTL logic family
– Select one of eight data inputs using three select lines (A, B, C)
– Strobe (enable) input for controlled operation
– Provides true (Y) and complementary (W) outputs
– Standard Dual In-Line Package (DIP) for easy breadboard and PCB prototyping
– Ideal for data routing, ALUs, communication systems, and digital learningSKU: n/a - Integrated Circuits (ICs)
74138 3-to-8 Line Decoder/Demultiplexer IC (DIP)
- TTL-based 3-to-8 line decoder and demultiplexer
- Accepts a 3-bit binary input and provides eight active-low outputs
- Three enable inputs (two active-low, one active-high) for flexible control and cascading
- Fast switching, low power consumption from TTL technology
- Standard 16-pin DIP package, breadboard and PCB friendly
- Ideal for memory addressing, I/O selection, and digital logic projects
SKU: n/a - Boards, Modules and Accessories
3x 18650 Battery Case Cell Holder
- Holds three standard 18650 lithium-ion cells securely
- Pre-attached leads and wires for quick, tool-free connection
- Durable, heat-resistant plastic frame for repeated use
- Lightweight and stackable for clean, compact builds
- Ideal for DIY projects, robotics, flashlights, and electronics
- No soldering required – insert cells and start powering your project
SKU: n/a - Boards, Modules and Accessories, Accessories
DC Female Power Jack Connector
– Durable DC power jack female for 2.1mm x 5.5mm male plugs
– Tight-grip DC female connector for stable power flow
– Universal 2.1mm DC power jack fits most electronics
– Easy-to-solder DC power socket female for DIY and repairs
– Reliable DC female power plug for CCTV, Arduino, and routers in Pakistan
– Affordable, long-lasting connector for everyday useSKU: n/a - Integrated Circuits (ICs)
7448 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD inputs into outputs for driving 7-segment LED displays
– TTL logic family, operates at 5 V typical
– Includes lamp test, blanking input and ripple blanking features
– Designed for standard common anode 7-segment LED indicators
– 16-pin DIP package, breadboard and through-hole friendly
– Ideal for educational projects, counters, clocks and microcontroller displaysSKU: n/a - Accessories
2x 18650 Battery Cell Holder with Cover and On/Off Switch
• Holds 2 × 18650 Li-ion batteries (not included) for approx. 7.4V nominal
• Built-in ON/OFF rocker switch for easy power control
• Snap-on protective cover prevents dust and accidental contact
• Durable ABS enclosure with pre-soldered red (+) and black (-) leads
• Compact and lightweight (approx. 78 × 42 × 20 mm); ideal for portable use
• Ready for DIY electronics, robotics, Arduino, Raspberry Pi, and lighting projectsSKU: n/a - Boards, Modules and Accessories, Boards and Programmers
ESP32 S3 N16R8 WiFi + Bluetooth Development Board
Boards, Modules and Accessories, Boards and ProgrammersESP32 S3 N16R8 WiFi + Bluetooth Development Board
- Dual-core Xtensa LX7 processor up to 240 MHz for high-performance embedded tasks
- Built-in Wi-Fi (802.11 b/g/n) and Bluetooth 5.0 (LE) for robust wireless connectivity
- 16MB Flash and 8MB PSRAM (N16R8) for larger firmware and AI models
- AI acceleration support optimized for voice and image recognition on the edge
- USB Type-C for power, programming, and on-board debugging
- Multiple GPIOs and rich peripherals (SPI, I2C, UART, ADC, DAC) compatible with Arduino, ESP-IDF, and MicroPython
SKU: n/a - Boards, Modules and Accessories, Accessories
Screw Terminal Block Connector 2-Pin and 3-Pin
– Available in 2-pin and 3-pin configurations to suit different wiring needs
– Simple screw terminal design for quick, secure wire connections
– Durable plastic housing and metal screw contacts for long-lasting reliability
– Compact, space-saving form factor for tight installations
– Color-coded terminals and marked pins for easy identification
– High voltage rated for both low and high power applicationsSKU: n/a - Boards, Modules and Accessories
N20 Mini DC Gear Motor Mounting Bracket Holder
– Precision fit for N20 12mm mini DC gear motors
– Durable construction: metal or plastic options
– Compact and lightweight for tight builds
– Pre-drilled mounting holes for secure attachment
– Vibration-resistant hold to keep motor aligned
– Ideal for robotics, automation, Arduino and Raspberry Pi projectsSKU: n/a - Boards, Modules and Accessories
Mini DC Toy Motor 5V
- Compact 5V DC motor ideal for small toys and models
- High-speed rotation for energetic play
- Quiet, smooth operation for indoor use
- Lightweight design fits tight spaces in hobby projects
- Easy to power with low-voltage circuits and batteries
- Durable and affordable for school kits and DIY builds
SKU: n/a - Boards, Modules and Accessories
Power Plus 9V High Quality Alkaline Battery
– High energy density for reliable, long-lasting power
– Long shelf life up to 5 years, ideal for emergency kits
– Wide compatibility with smoke detectors, multimeters, toys, and more
– Durable, leak-proof construction to protect devices
– Consistent voltage output for optimal device performance
– Available in alkaline and rechargeable variants for eco-friendly optionsSKU: n/a - Accessories
2-Way DIP Switch SPST Slide Switch (2.54mm)
– Compact 2-position DIP slide switch with SPST on/off operation
– Standard 2.54mm pitch, fits breadboards and PCBs
– Gold-plated contacts for reliable conductivity and corrosion resistance
– Through-hole mounting with durable plastic housing
– Tactile sliding mechanism with clear ON/OFF markings
– Ideal for microcontroller settings, address selection, and prototypingSKU: n/a
