Shop
Showing 436–450 of 1164 resultsSorted by popularity
-
Boards, Modules and Accessories, Sensors And Modules
CH340 USB to TTL Serial Converter Module
– Compact CH340 USB to TTL serial adapter for Arduino, ESP8266, and embedded projects
– CH340G chipset for stable USB-to-serial communication
– Selectable 3.3V or 5V TTL logic levels via jumper
– Mini USB connector with TX/RX indicator LEDs for real-time activity
– Plug and play support for Windows, macOS, and Linux
– Breadboard-friendly dimensions and easy debugging for makers in IslamabadSKU: n/a -
Intermediate Electronics Kits
Arduino Starter Kit with Component Box
– All-in-one Arduino starter kit with organized component box for easy storage and fast project setup.
– Includes Arduino UNO SMD, breadboard, jumper wires, sensors, motors, display modules and more.
– Ideal for students, hobbyists and beginners learning electronics and programming.
– Safe low-voltage components perfect for school STEM, labs and home learning in Pakistan.
– High-quality, tested parts for reliable performance and long-term use.
– Ready for tutorials, classroom projects and DIY prototypes out of the box.SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
CP2102 USB to TTL UART 5-Pin Serial Converter Module
Boards, Modules and Accessories, Sensors And ModulesCP2102 USB to TTL UART 5-Pin Serial Converter Module
- Converts USB signals to TTL-level serial signals for direct device interfacing
- Built around the reliable CP2102 USB 2.0 chipset for fast data transfer
- Supports a wide range of baud rates up to 1 Mbps for flexible communication
- Selectable 3.3V or 5V operating voltage and 5-pin header (TX, RX, 3.3V, 5V, GND)
- LED indicators for power and data activity to simplify troubleshooting
- Cross-platform driver support for Windows, Linux, and macOS
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
MAX6675 Module with K Type Thermocouple Sensor
– MAX6675 thermocouple-to-digital converter for precise temperature readings
– K-type thermocouple sensor: measures 0°C to 1024°C (32°F to 1875°F)
– SPI interface for easy connection to microcontrollers
– Built-in cold-junction compensation for accurate results
– High resolution, low noise and fast response time
– Compact, easy-to-integrate module for industrial and DIY projectsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
SW-420 Vibration Sensor Module
– High sensitivity piezoelectric or accelerometer-based detection for shocks and vibration
– Dual outputs: digital (DO) and analog (AO) for flexible interfacing
– Adjustable potentiometer to fine-tune sensitivity for different environments
– Compact, low-profile module for space-saving integration
– Compatible with Arduino, Raspberry Pi and most microcontrollers
– Ideal for security alarms, industrial monitoring, robotics and detection systemsSKU: n/a -
Boards, Modules and Accessories, RC Drones and Accessories
A2212 1400KV BLDC Brushless DC Drone Motor
Boards, Modules and Accessories, RC Drones and AccessoriesA2212 1400KV BLDC Brushless DC Drone Motor
- 1400KV rating for high-speed performance and quick acceleration
- Efficient brushless BLDC design for smooth operation and low maintenance
- High torque output for demanding tasks and responsive control
- Durable precision construction for long-lasting reliability
- Lightweight, compact form factor for easy integration into small frames
- Ideal choice for drones, RC vehicles, boats, and custom mechanical projects
SKU: n/a -
Incubator and Poultry Industry
Digital Display Eggs Incubator Timer Relay Module 6-30V
– Wide voltage range: Operates reliably across 6-30V for flexible installation.
– Bright digital display: Clear real-time monitoring of timer and relay status.
– Programmable timer: Precise control of incubation cycles with customizable settings.
– Versatile applications: Ideal for egg incubation, automation, temperature control, and industrial timing tasks.
– Durable and energy efficient: Built for continuous operation with low power consumption.
– User-friendly interface: Simple controls for fast setup and dependable performance.SKU: n/a -
Boards, Modules and Accessories, Motors, Drivers and Wheels, RC Drones and Accessories
Servo CCPM Consistency Tester
Boards, Modules and Accessories, Motors, Drivers and Wheels, RC Drones and AccessoriesServo CCPM Consistency Tester
– Tests servo performance in CCPM systems for RC models
– Three testing modes: Manual, Neutral, Automatic
– Connects up to three servos or ESCs simultaneously
– Compatible with analog and digital servos and ESCs
– Compact, lightweight, and portable for field and bench use
– Simple, user-friendly operation for hobbyists and professionalsSKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (3-Pin)
- 15cm JST PH Female Connector Cable with 3-pin configuration and 2.0mm pitch
- Pre-wired harness cable for plug-and-play signal and low-power DC connections
- Compatible with Arduino, ESP32, sensors, robotics, drones, and IoT applications
- Features secure locking system to prevent accidental disconnection during operation
- Flexible stranded copper wires with PVC insulation for easy routing in tight spaces
- Supports up to 2A per line, ideal for power + signal + ground configurations
- No soldering required on connector side for quick prototyping and development
SKU: n/a -
Accessories
JST Male Connector 2.0mm (3-Pin) (Straight)
- 3-pin JST PH male header connector with compact 2.0mm pitch for high-density PCB designs
- Available in straight (vertical) mounting orientations
- Through-hole PCB mounting with secure locking interface for stable wire-to-board connections
- Rated up to 2A per pin, ideal for signal and low-power DC applications
- Perfect for Arduino, ESP32, drones, robotics, sensors, and battery-powered devices
- Features nylon housing with tin-plated brass pins for reliable electrical performance
SKU: n/a -
Accessories
Metal Ball Caster Wheel 20mm Metal Ball
- 20mm metal ball caster wheel for smooth omnidirectional movement
- 360-degree free rotation enables effortless movement in all directions
- Strong metal construction with wear-resistant steel ball design
- Low friction support ideal for robotic chassis and smart car platforms
- Compact design with pre-drilled mounting holes for easy installation
- Perfect balancing wheel for 2WD and 4WD robotics projects
SKU: n/a -
Sensors And Modules
Multirotor ESC Power Distribution Board
- Centralized power distribution from single battery to multiple ESCs for quadcopters and multirotor drones
- High current handling capacity up to 100A or more with large, secure solder pads
- Supports 4-8 ESC connections with organized layout reducing wiring clutter
- Compact and lightweight design (5g-10g) with standard drone mounting holes (30.5mm/45mm spacing)
- Available in multiple sizes: 30x30mm, 35x35mm, and 50x50mm variants
- Durable glass fiber PCB construction ensuring stable current delivery to all motors
SKU: n/a -
Accessories
Small Hot Melt Glue Gun 20W
- Compact 20W mini hot melt glue gun for precision bonding and detailed crafts
- Fast 2-5 minute heat-up time with stable 180-220°C working temperature
- Compatible with standard 7mm diameter mini glue sticks for easy availability
- Ergonomic trigger design provides smooth and controlled adhesive flow
- Built-in PTC heating element ensures constant temperature and safe operation
- Perfect for DIY projects, electronics repair, and household fixes
SKU: n/a -
Beginner STEM Kits
STEM Magnet Science 12 in 1 DIY Learning Kit
– Build 12 hands-on magnetic experiments to explore attraction, repulsion, fields, and motion
– Learn core STEM concepts: magnetism, polarity, force, and simple motors
– Includes magnetic bars and discs, iron filings, compass, frames, rods, clips, screws, and instruction manual
– Clear step-by-step guide for beginners and classroom use
– Safe, non-toxic components and child-friendly design (keep small parts away from children under 3)
– Portable kit ideal for home learning, classrooms, after-school projects, and science fairsSKU: n/a -
Accessories
27μF 160V Electrolytic Polarized Capacitor
- Capacitance: 27μF for effective filtering and smoothing
- Voltage Rating: 160V DC for high-voltage applications
- Polarized electrolytic design for efficient energy storage
- Radial lead package for easy through-hole PCB mounting
- Stable electrical characteristics for continuous operation
- Ideal for power supplies, audio, control, and repair projects
SKU: n/a
