Shop
Showing 346–360 of 1164 resultsSorted by popularity
-
Integrated Circuits (ICs)
74139 Dual 1-of-4 Decoder/Demultiplexer IC (DIP)
– Dual 2-to-4 decoder/demultiplexer (two independent sections)
– Active-LOW, mutually exclusive outputs for clear chip-selects
– Separate enable inputs for each decoder for independent control or cascading
– TTL-compatible inputs; typical 5V operation with fast switching
– Breadboard-friendly DIP-16 package for prototyping and labs
– Ideal for address decoding, data routing, and control logicSKU: n/a -
Boards, Modules and Accessories
TCS34725 RGB Color Sensor Module
- High-accuracy TCS34725 RGB color sensor module with digital color recognition.
- Built-in IR blocking filter for precise color readings under mixed lighting.
- Integrated white LED for consistent illumination and ambient light measurement.
- I2C communication for easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Compact TCS34725 sensor breakout board ideal for robotics, smart lighting, and embedded projects.
- Perfect for students, engineers, and hobbyists—available to buy online in Pakistan.
SKU: n/a -
Boards, Modules and Accessories
Pixhawk 2.4.8 32-Bit Flight Arm Controller Kit for Drone
– Professional-grade flight control for drones, UAVs, and robotics
– Open-source firmware support: ArduPilot and PX4 for full customization
– Built-in IMU with gyroscope, accelerometer, and HMC5883L magnetometer for accurate navigation
– GPS waypoint navigation and long-range telemetry support for autonomous missions
– High-performance STM32F427 processor with I2C, UART, CAN, and PWM interfaces
– Compact, lightweight design with failsafe, redundancy, and extensible ports for GPS, cameras, and gimbalsSKU: n/a -
Boards, Modules and Accessories
ZMPT101B AC Voltage Sensor Module Single Phase
– High-precision ZMPT101B AC voltage sensor module for Arduino and microcontroller projects.
– Accurate AC voltage measurement for home automation, energy monitoring, and IoT systems.
– Easy analog output compatible with Arduino ADC (requires simple calibration).
– Compact, robust module ideal for DIY electronics and industrial monitoring.
– Simple wiring: VCC, GND and analog output to ADC pin for fast integration.
– Available to buy online in Pakistan for fast delivery and reliable performance.SKU: n/a -
Boards, Modules and Accessories
AC-DC Power Supply Adapter 24V 1A
- Compact 24V 1A AC-DC adapter for LED strips, mini motors, routers, and small electronics.
- Stable 24V DC output for clean, consistent power delivery.
- Built-in over-voltage and over-current protection to safeguard devices.
- Durable casing with plug-and-play setup for easy replacement or upgrade.
- Perfect for DIY projects, automation kits, and home gadgets requiring 24V input.
- Lightweight, space-saving design fits tight installations and workbenches.
SKU: n/a -
Boards, Modules and Accessories
DC SPDT 5-Pin Relay 6V / 12V
– Compatible with both 5V and 12V DC control voltages
– Available in SPDT and DPDT contact configurations
– Durable copper coil and robust casing for long life
– Strong contact rating to handle moderate to high loads
– Compact form factor for PCB and relay module integration
– Ideal for Arduino projects, automotive circuits, and automationSKU: n/a -
Boards, Modules and Accessories
Fast Charging Adapter Module Type-C USB PD65W DC8-32V 3.25A 65W
– Up to 65W Power Delivery output for rapid device charging
– USB Type-C PD with 3.25 A output for phones, tablets, and laptops
– Wide DC8-32V input for car, truck, and RV use
– Built-in surge protection and temperature control for safe charging
– Slim, durable aluminum alloy housing, weighs just 45 g for easy travel
– Universal USB C compatibility reduces cable clutter and supports many devicesSKU: n/a -
Boards, Modules and Accessories, Display Modules and LCDs
16×4 Green LCD Character Display Module
- 16×4 alphanumeric LCD module with green backlight for clear visibility
- Displays 4 rows of 16 characters for organized text output
- Available in I2C and SPI versions for flexible communication
- Easy integration with Arduino and Raspberry Pi projects
- Ideal for DIY electronics, data loggers, status monitors, and sensor displays
- Durable, affordable, and beginner-friendly for students and hobbyists
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
ADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
Boards, Modules and Accessories, Sensors And ModulesADS1115 16-Bit ADC 4-Channel Programmable Gain Amplifier Module
• 16-bit high-resolution ADC for ultra-precise measurements
• 4 analog input channels (single-ended) or 2 differential channels
• Built-in programmable gain amplifier (PGA) for amplifying weak signals
• I2C interface for easy connection to Arduino, Raspberry Pi, and ESP boards
• Low power consumption suitable for battery-powered projects
• Onboard comparator for real-time monitoring and alertsSKU: n/a -
Boards and Programmers, Boards, Modules and Accessories
Arduino Mega 2560 With Logo (Original) with Free USB Cable
Boards and Programmers, Boards, Modules and AccessoriesArduino Mega 2560 With Logo (Original) with Free USB Cable
- Original Arduino Mega 2560 with logo for authentic performance
- Free USB cable included for easy connection and programming
- 54 digital I/O pins and 16 analog inputs for large projects
- Powered by the ATmega2560 microcontroller for reliable processing
- Compatible with a wide range of Arduino shields and accessories
- Ideal for robotics, home automation, industrial control, and prototyping
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
Speed Measuring Sensor Module (LM393)
– High-precision optical speed detection using the LM393 comparator
– Adjustable sensitivity with onboard potentiometer for varying surfaces and light
– Clean digital pulse output for easy microcontroller interfacing
– Compact design with simple GPIO connections and mounting holes
– Ideal for robotics, motor control, RPM monitoring and feedback systems
– Operates from 5V and works in temperatures from -20°C to 70°CSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
YF-S201 Water Flow Sensor
– Pulse output signal for straightforward interfacing with microcontrollers (Arduino, Raspberry Pi, etc.).
– High accuracy for reliable water flow measurements.
– Wide flow range: 1–30 L/min, suitable for irrigation and monitoring.
– Compact, durable design for easy installation and long-term use.
– Low power consumption, ideal for battery-powered systems (5V operation).
– Compatible with clean, non-corrosive liquids such as water; great for DIY and industrial projects.SKU: n/a -
Accessories
102 1nF 1000pF 0.001μF Non-Polar Ceramic Capacitor
- Capacitance Value: 1000pF (1nF / 0.001μF) with marking code 102
- Non-Polarized Design: Can be connected in any orientation for easy installation
- Stable Ceramic Dielectric: Reliable performance across wide range of applications
- Compact Through-Hole Package: Ideal for PCB mounting and breadboard prototyping
- High-Frequency Applications: Perfect for RF circuits, oscillators, filtering, and timing circuits
- Low Leakage Current: Suitable for signal coupling, decoupling, and noise suppression
- Long Operational Lifespan: High reliability for Arduino projects and general-purpose circuit design
SKU: n/a -
Integrated Circuits (ICs)
CD4075 Triple 3-Input OR Gate IC (DIP)
- CMOS-based Triple 3-Input OR Gate IC with three independent logic gates in a single DIP-14 package
- Wide supply voltage range of 3V to 18V, making it compatible with a broad range of digital circuits and systems
- Ultra-low power consumption thanks to CMOS technology, ideal for battery-powered and portable devices
- High noise immunity ensures stable and reliable performance in electrically noisy environments
- Buffered outputs with high fan-out capability to drive multiple logic inputs simultaneously
- Easy to prototype with standard breadboards and through-hole PCB designs using the DIP package
- Fully compatible with the 4000 series CMOS logic family for seamless system integration
SKU: n/a -
BMS Modules and Accessories
3S 12V 10A Li-Ion Cell BMS Charging Protection Module
- Professional 3S 12V BMS module for 3-series lithium-ion battery pack protection
- 10A continuous discharge current support for medium power applications
- Complete safety protection: overcharge, over-discharge, overcurrent, and short circuit
- Built-in cell balancing function maintains equal voltage across all cells
- Compact PCB design with easy connection interface for B+/B- and P+/P- terminals
- Perfect for 18650 battery packs, DIY power banks, LED systems, and robotics projects
SKU: n/a
