Shop
Showing 271–285 of 1164 resultsSorted by popularity
-
Boards, Modules and Accessories, Sensors And Modules
HC-SR501 PIR Motion Sensor Module
- Passive Infrared (PIR) sensor for motion detection.
- Adjustable sensitivity and delay time via onboard potentiometers.
- Detection range up to 7 meters with a 120 degree cone angle.
- Digital output for easy integration with microcontrollers.
- Low power consumption suitable for battery-powered projects.
- Compact, lightweight design for space-constrained applications.
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
5V 8-Channel Arduino Relay Module Board
- Control up to 8 independent devices from one microcontroller or PLC
- Jumper-selectable isolation to separate relay power (JD-VCC) from logic power (VCC)
- LED status indicators for each channel for quick diagnostics
- TTL trigger inputs compatible with 3.3V and 5V controllers (Arduino, Raspberry Pi, ESP32)
- Secure screw terminals and header pins for load and signal connections
- Compact PCB with mounting holes; typical relay rating up to 10A per channel (verify datasheet)
SKU: n/a -
Motors, Drivers and Wheels
A2212 2200KV BLDC Brushless DC Motor
– High-speed 2200KV outrunner motor for fast-response applications
– Brushless design for higher torque and improved efficiency
– Precision copper windings and strong permanent magnets for reliable output
– Lightweight and compact, ideal for drones, RC planes, and robotics
– Durable metal shaft and bearings for smooth rotation and long life
– Wide compatibility with standard ESCs and LiPo batteriesSKU: n/a -
-
Integrated Circuits (ICs)
CD4011 Quad 2-Input NAND Gate IC (DIP)
– CD4011 Quad 2-Input NAND Gate IC in a compact 14-pin DIP package
– Contains four independent 2-input NAND gates for digital logic
– Wide operating voltage: 3 V to 15 V for flexible system design
– Low power consumption with high noise immunity for reliable switching
– TTL and CMOS compatible, ideal for prototyping and educational use
– Commonly used in combinational logic, control circuits, and DIY projectsSKU: n/a -
Boards, Modules and Accessories
Dual PS2 Game Joystick Button Module Shield for Arduino Uno
– Dual-channel PS2-style joystick module with two analog axes for precise motion control
– Integrated push button for additional input and interaction
– Easy plug-and-play compatibility with Arduino Uno and other Arduino boards
– Smooth, responsive analog control ideal for robotics, drones, and custom game controllers
– Compact, breadboard-friendly design for prototyping and compact projects
– Affordable and reliable choice for hobbyists, students, and professional prototypes in PakistanSKU: n/a -
Boards, Modules and Accessories
Arduino Nano USB Cable
- Stable power delivery and fast data transfer for Arduino Nano boards
- Quality copper wiring and reinforced joints for long-lasting use
- Snug, reliable plug that resists slipping during uploads
- Supports data plus charging simultaneously
- Compatible with Arduino Nano USB plug types and USB adapters
- Ideal replacement cable for programming, prototyping, and classroom projects
SKU: n/a -
Boards, Modules and Accessories, Motors, Drivers and Wheels
L293D 4-Channel Motor Driver Module
– Dual H-bridge driver for two DC motors or one bipolar stepper motor
– Logic-level inputs compatible with Arduino and Raspberry Pi
– Built-in flyback diodes and thermal protection for reliable operation
– Supports motor voltages up to 36V; ~600 mA continuous per channel, 1.2 A peak
– Simple PWM speed control and direction reversal
– Compact breakout with screw terminals and header pins for easy wiringSKU: n/a -
Accessories
10x15cm Double Sided Fiber Glass Green Veroboard
- Double-sided FR4 fiberglass veroboard with copper pads on both sides for complex circuit routing
- Large 10x15cm (100x150mm) size ideal for advanced electronics and multi-stage projects
- Professional-grade FR4 material offers excellent mechanical strength and heat resistance
- Standard 2.54mm pitch with pre-drilled holes compatible with ICs, headers, and common components
- Green solder mask provides insulation and prevents accidental shorts for reliable connections
- Perfect for Arduino projects, power circuits, audio amplifiers, robotics, and industrial applications
SKU: n/a -
Accessories
6x8cm Double Sided Fiber Glass Green Veroboard
- Double-sided copper layer veroboard with pads on both sides for enhanced connectivity
- Made from durable FR4 fiberglass material with heat-resistant properties
- Compact 6x8cm (60x80mm) size ideal for medium-sized electronic projects
- Standard 2.54mm pitch compatible with most ICs and electronic components
- Green solder mask with pre-drilled holes for easy component placement
- Perfect for DIY electronics, prototyping, Arduino projects, and educational labs
SKU: n/a -
Batteries, Cells and Power Supply
8V 2.5A Rechargeable Li-Ion Battery 7.4V Battery 18650 Cell Battery
Batteries, Cells and Power Supply8V 2.5A Rechargeable Li-Ion Battery 7.4V Battery 18650 Cell Battery
– Nominal 7.4 V Li-Ion battery pack (8.4 V fully charged)
– Rated discharge current 2 A for consistent power delivery
– Built with 18650 cells for high energy density and long run time
– Rechargeable design with long cycle life and low self discharge
– Built-in protection: overcharge, over-discharge, over-current, short circuit
– Compact, lightweight form factor for robotics, IoT, RC, and portable electronicsSKU: n/a -
Batteries, Cells and Power Supply
3.7V 1200mAh 603450 4.44Wh LiPo Rechargeable Battery
– Nominal voltage: 3.7V lithium polymer (LiPo) rechargeable cell
– Capacity: 1200mAh (4.44Wh) for long runtimes in compact devices
– Slim dimensions: approx. 6mm × 34mm × 50mm for space‑constrained designs
– High energy density and lightweight construction for IoT, wearables, and RC
– Optional PCM protection available to guard against overcharge, overdischarge, and short circuits
– Rated 300–500 charge cycles depending on usage and handlingSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
ACS712 Hall Effect Current Sensor Module 20A
- Measures AC and DC currents up to ±20A
- Output sensitivity: 100 mV/A for easy ADC conversion
- Safe galvanic isolation using Hall effect sensing
- Compatible with Arduino, ESP32, STM32 and Raspberry Pi
- Low-noise analog output and compact PCB design
- Operating voltage: 5V DC
- Ideal for robotics, power monitoring and automation
SKU: n/a -
Integrated Circuits (ICs)
556 Timer IC NE556 Dual Timer IC (DIP)
– Contains two independent NE555 timers in a single DIP package
– Ideal for timing, PWM, and oscillator circuits
– Operates in monostable and astable modes for flexible timing
– Wide supply range: 4.5 V to 16 V for versatile use
– High output drive capability suitable for LEDs and motors
– Breadboard and PCB friendly DIP package for prototypingSKU: n/a -
Boards, Modules and Accessories, Accessories
12×12 Inch Single Sided Bakelite PCB Board
– Single-sided PCB with a copper layer for easy through-hole soldering.
– Made from high-quality Bakelite (phenolic resin) for excellent insulation.
– Large 1ft x 1ft (305 x 305 mm) size for complex circuits and multi-layout prototyping.
– Heat and chemical resistant; suitable for soldering and light industrial use.
– Durable, easy to cut/drill, and customizable for DIY, education, and production.
– Ideal for through-hole components and low-volume circuit manufacturing.SKU: n/a
