Shop
Showing 196–210 of 1164 resultsSorted by popularity
-
Integrated Circuits (ICs)
74157 Quad 2-Input Multiplexer MUX IC (DIP)
– Quad 2-Input Multiplexer: 4 independent 2-to-1 selection channels
– TTL-compatible inputs and outputs for standard digital logic
– Common select and enable pins simplify control for all channels
– Fast switching with low propagation delay for timing-sensitive designs
– DIP package for easy breadboard prototyping and PCB integration
– Ideal for data routing, microprocessor interfacing, arithmetic logic, and lab experimentsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
KY-022 IR Infrared Receiver Module 38kHz
- High-sensitivity IR detection for reliable remote signal reception.
- Wide receiving angle captures signals from multiple directions.
- Built-in 38kHz demodulation circuit for easy decoding.
- Simple 3-pin interface: VCC, GND, OUT—easy microcontroller integration.
- Compact, low-power design suitable for battery-operated projects.
- Ideal for remote controls, home automation, robotics, and DIY electronics.
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
Voltage Sensor Module 0-25V DC
- Measures DC voltage from 0 to 25V for broad applications
- Provides proportional 0-5V analog output for microcontrollers
- Simple 3-pin interface (VCC, GND, Signal) for easy wiring
- High accuracy and stability with ±1% precision
- Compact, lightweight design ideal for battery monitoring
- Includes overvoltage protection to safeguard connected devices
SKU: n/a -
Sensors And Modules, Wireless Communication
NRF24L01 Base Adapter Board Module
– Compact NRF24L01 Base Module for reliable 2.4GHz wireless communication
– Compatible with Arduino and Raspberry Pi via SPI
– Low power consumption ideal for battery-powered projects
– High data rate up to 2 Mbps for fast data transfer
– Effective range up to 100 meters in open space
– Perfect for DIY electronics, sensor networks, robotics; order now in IslamabadSKU: n/a -
Boards, Modules and Accessories, Wireless Communication
NRF24L01 2.4GHz RF Wireless Transceiver Module
Boards, Modules and Accessories, Wireless CommunicationNRF24L01 2.4GHz RF Wireless Transceiver Module
– Compact, low-power 2.4GHz wireless transceiver ideal for IoT and maker projects
– Supports data rates of 250 kbps, 1 Mbps, and 2 Mbps
– Up to 100 m range with an external antenna
– Easy SPI interface for Arduino, Raspberry Pi, and other microcontrollers
– Energy-saving low power mode for long battery life
– Affordable, well-documented module with extensive tutorials and librariesSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
TTP223 Capacitive Touch Sensor Module
- High-sensitivity capacitive touch detection using TTP223 sensor.
- Wide voltage range: 3.3V to 5V, compatible with Arduino and other microcontrollers.
- Digital output: simple VCC, GND, OUT pinout for fast integration.
- Low power consumption, ideal for battery-powered projects.
- Compact low-profile board (approx. 24 x 18 x 3 mm) fits tight spaces.
- Momentary touch switch behavior for touch buttons, keypads, and interactive systems.
SKU: n/a -
Boards and Programmers
ESP32U WiFi + BLE Bluetooth Board Type-C (38 Pin) (Pre-Soldered)
– ESP32-based IoT development board with built-in Wi-Fi (802.11 b/g/n) and Bluetooth Low Energy (BLE)
– USB Type-C interface for power and programming
– 38 GPIO pins for sensors, displays, and peripherals
– Dual-core ESP32 processor with up to 240 MHz clock speed
– Pre-soldered header pins for immediate breadboard and jumper wire use
– Supports Arduino IDE, ESP-IDF, and MicroPython for flexible programmingSKU: n/a -
Boards and Programmers
Arduino Uno R3 DIP ATMEGA328P Development Board
– Socketed ATmega328P DIP microcontroller for easy removal and replacement
– 14 digital I/O pins with 6 PWM outputs
– 6 analog inputs and built-in UART, SPI, I2C interfaces
– USB programming (ATmega16U2 or CH340), auto-reset, Arduino IDE compatible
– Multiple power options: USB, barrel jack (7–12V), or Vin with onboard 5V regulation
– Power LED, TX/RX LEDs, reset button; ideal for education, prototyping, robotics, and IoTSKU: n/a -
Boards, Modules and Accessories, Accessories
Aluminum Water Cooling Block 40*40*12mm
- High-quality aluminum alloy construction for fast heat dissipation
- Compact dimensions: 40×40×12mm for tight spaces
- Dual water inlet and outlet ports for easy tubing connection
- Lightweight, corrosion-resistant design suitable for long-term use
- Ideal for CPUs, GPUs, lasers, 3D printers and other DIY cooling projects
SKU: n/a -
Integrated Circuits (ICs)
CD4013 Dual D-Type Flip-Flop IC (DIP)
- Contains two independent, edge-triggered D-type flip-flops in one DIP package
- Each flip-flop has D, CLK, Set, Reset inputs and complementary Q and Q̅ outputs
- Wide supply voltage: 3V to 15V for flexible system integration
- Low power CMOS technology with high noise immunity for stable operation
- Ideal for frequency division, counters, data latching, and timing circuits
- Standard DIP package for easy breadboard prototyping and PCB mounting
SKU: n/a -
Integrated Circuits (ICs)
LM393 Dual Comparator IC (DIP)
- Dual precision voltage comparators in a single DIP package
- Wide supply range: 2V to 36V (single supply) or ±1V to ±18V (dual supply)
- Open-collector outputs for easy logic interfacing
- Low power consumption, ideal for battery-powered projects
- Fast response and high accuracy for threshold detection
- Breadboard-friendly DIP package for prototyping and education
SKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories, RC Drones and Accessories
IMAX RC B3 Pro Compact LiPo Battery Balance Charger
Batteries, Cells and Power Supply, Boards, Modules and Accessories, RC Drones and AccessoriesIMAX RC B3 Pro Compact LiPo Battery Balance Charger
– Compact LiPo balance charger for 2S (7.4V) and 3S (11.1V) battery packs
– Built-in cell balancing to extend battery life and prevent cell damage
– LED indicators for easy, real-time charge status monitoring
– Plug-and-play operation with no complicated setup required
– Lightweight, portable design ideal for field charging and travel
– Safe and reliable charging with protection against overcharge and imbalanceSKU: n/a -
Intermediate Electronics Kits
4WD Arduino Smart Robotic Car Kit (UnAssembled)
– 4-wheel drive metal chassis with four gear motors and rubber tires for strong traction
– Arduino UNO SMD board and Uno USB cable for easy programming
– L298N motor driver and motor shield compatibility for reliable motor control
– HC-SR04 ultrasonic sensor and 2 IR line-tracking sensors for obstacle avoidance and line following
– Includes batteries (3 x 18650), charger, IR remote, SG-90 servo, jumpers, and connectors
– Unassembled STEM kit ideal for hands-on learning, coding, and robotics customizationSKU: n/a -
Sensors And Modules, Wireless Communication
UBlox NEO-6M GPS Module V2 with Antenna
- High-precision GPS positioning with typical 2.5 meter accuracy.
- Fast satellite acquisition with startup time under 35 seconds in open sky.
- Multi-constellation support: GPS, GLONASS, and Galileo for improved reliability.
- Compact form factor for easy integration into drones, vehicles, and IoT devices.
- UART serial interface (TX/RX) compatible with Arduino, Raspberry Pi and other microcontrollers.
- Built-in antenna for straightforward setup; supports external antenna for challenging reception.
SKU: n/a -
Boards and Programmers
Arduino Nano V3 Type-C Development Board (Solderless)
- Based on ATmega328P microcontroller for reliable performance
- USB Type-C connector for modern power and programming
- Solderless design — breadboard-friendly and ideal for prototyping
- Runs at 5V with a 16 MHz clock for Arduino-compatible projects
- 22 I/O pins supporting PWM, ADC, UART, SPI and I2C
- Preloaded with Arduino bootloader; compatible with Arduino IDE and libraries
SKU: n/a
