| Raspberry Pi 4 (Model B) |
| Kingston Class 10 (16GB) memory Card |
| Raspberry Pi 4 (Model B) Transparent Casing with Fan |
| 5v 3A(Min) charger |
| HDMI Cable |
| Heat Sink |
Boards and Programmer, Students Corner
Raspberry Pi 4 Model B with 4 GB Ram Complete Kit
| Raspberry Pi 4 (Model B) |
| Kingston Class 10 (16GB) memory Card |
| Raspberry Pi 4 (Model B) Transparent Casing with Fan |
| 5v 3A(Min) charger |
| HDMI Cable |
| Heat Sink |
₨38,000.00
Based on 0 reviews
Be the first to review “Raspberry Pi 4 Model B with 4 GB Ram Complete Kit”
Related products
-
Electronic Components, Students Corner
Max660 DIP and SMT
The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding -1.5V to -5.5V output. Using only two low-cost capacitors, the charge pump’s 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and board level voltage conversion applications. The MAX660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input. A frequency control (FC) pin selects either 10kHz typ or 80kHz typ (40kHz min) operation to optimize capacitor size and quiescent current. The oscillator frequency can also be adjusted with an external capacitor or driven with an external clock. The MAX660 is a pin compatible, high-current upgrade of the ICL7660. The MAX660 is available in both 8-pin DIP and small outline packages in commercial, extended, and military temperature ranges.
Features:-
• Small Capacitors
• 0.65V Typ Loss at 100mA Load
• Low 120µA Operating Current
• 6.5Ω Typ Output Impedance
• Guaranteed ROUT < 15Ω for C1 = C2 = 10µF
• Pin-Compatible High-Current ICL7660 Upgrade
• Inverts or Doubles Input Supply Voltage
• Selectable Oscillator Frequency: 10kHz/80kHz
• 88% Typ Conversion Efficiency at 100mA (IL to GND)
SKU: n/a -
Boards and Programmer, Students Corner
Motor Driver L298N
L298N driver module, with ST L298N chip can directly drive two 3-30V DC motors, and provide 5V output interface, can circuit chip to 5V power supply, compatible with 3.3 VMCU control, You can easily control the speed and direction of the DC motor, you can also control the 2-phase stepper motor, essential for smart car.Product parameters:1 driver chip: L298N dual h-bridge driver chip
VMS supply area 2-terminal driver part: + 5V ~ + 35V
3 units of the maximum current Io: 2A / bridge
4 logic part of the terminal power range of Vss supply: 4.5-5 5V
5 logical parts of the operating current range: 0 ~ 36mA
6. Control signal input voltage range: 4.5-5.5V low 0V high
7 maximum power consumption: 20W
8 storage temperature: -25 ~ + 130
9 dimensions of controller board: 55mm x 60mm x 30mm
10 weight of controller board: 33g
11.Other features: control direction indicator, power indicator, current detection, logic part of the board to take the power interface.Package Included: Metal Melting Torch Mini Gold Furnace Graphite:SKU: n/a -
Boards and Programmer, Students Corner
Raspberry Pi Zero WH (Wireless) With Pre-Soldered Header in Pakistan
Boards and Programmer, Students CornerRaspberry Pi Zero WH (Wireless) With Pre-Soldered Header in Pakistan
The Brand New Raspberry Pi Zero WH Wireless (with Pre-Soldered Header) is an ultra-low-cost and ultra-small variant of the original Raspberry Pi. It’s tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi-based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features onboard Wireless Internet & Bluetooth for all your connectivity needs!
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there’s plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, which you’ll need to solder your own headers too. With its small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!Unlike it’s larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There’s also no DSI screen port, no ethernet, no analog audio and no full-sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.It’s perfect for everyone who doesn’t own a soldering iron or who wants the soldering legwork done for them.What can you do with the Raspberry Pi Zero WH.!What can’t you do? Am I right?! The small size of the Zero W makes it perfect for projects with minimal wiggle-room. In such projects, some people have no need for GPIO pins — they simply solder directly to the board. However, there are many instances where you do want a header on your Zero W, for example in order to easily take advantage of the GPIO expander tool for Debian Stretch on a PC or MacSpecifications:
- Broadcom BCM2835 1GHz processor
- 512MB RAM
- Mini HDMI and USB On-The-Go port
- Micro USB power
- HAT-compatible 40-pin header
- Composite video and reset headers
- CSI camera connector
- 802.11b/g/n Wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Package Include-
- 1 x Raspberry Pi Zero WH (Wireless) With Pre-Soldered Header
Best Online Shopping Website for Raspberry Pi Zero in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Boards and Programmer, Students Corner
Motor Driver L293D
This L293D Motor Driver Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically, this means using this chip you can use DC motors and power supplies of up to 36 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. a motor.
The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction of the motor drivers. The output enables the L293D is directly connected to PWM outputs of the Arduino.
Features of L293D Motor Driver Shield for Arduino:-
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
SKU: n/a - 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
There are no reviews yet.