Battery Charger & Supply
Showing all 6 results
-
Battery Charger & Supply, Consumable Electronics
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
- Main Stem: Cast Iron
- Voltage Input: DC12V
- Weight: 8lbs
- Inlet/ Outlet Port Fitting: 3/4
- Rated Power:175w
- Rate Current: 13A
- Max Flow: 40L/minute
- No-Load: 4500RPM
- used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
- Max Suction Distance:5m
- Head:10m
- Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
- Base Size: 3-1/2″ X 4-1/4″
- Power Corded 6ft Aprox
Features:
- With Inner Bypass Valve And Excellent Quality
- Work With Diesel; Machine Oil And Transformer Oil
- It Works By Vehicle Battery; With Good Self Priming Function
- Power 175W 12V DC Convenient To Carry And Use On Vehicle &Boat
- Suitable For Small Gas Station And Mobile Machinery Shop; Tanker Etc
- Powered By DC 12V Is A High Efficiency Diesel/kerosene Pump With Small Size
- Big Flow; High Delivery Head And Vehicle Battery Driven For Easy Operating
- Pump Is Also Equipped With Filter. Pump Will Work With Diesel Oil And Oil With Similar Specs (NO LUBICATIONG OIL)
Package Include:
- 1 x Diesel Pump
- 2 x Brass Adapters
- 1 x Gasket Filter
SKU: n/a -
Battery Charger & Supply, Consumable Electronics
25W Submersible Water Pump
The pumps are suitable for use in hydroponic systems, ponds, aquariums,air conditioner, air cooler, fountains and filter systems.In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.- There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.
- Clean water pump, remove the front cover and water leaf, with little brush or water, dirt, don’t move pump shaft.
If the pump does not operate, according to the following verification:- Check whether the circuit is damaged, for another input to ensure that the pump power.
- Ensure that the inlet without dirt.
- Take out the rotor to ensure that the rotor is not damaged or blocked.
Specifications:
- LH-1020
- Power: 25W
- Flow: 1000L/H
- HIMAX: 1.8 M
- Outlet: 13mm / 17mm
- Voltage: 110V/220V
Attention:
- Please don’t burn
- Work in clear water
- Please power off before use
- Do not operate in hot water
- Do not directly use the power line to pick up the pump
Package Include:
- 1 x 25W Submersible Water Pump
SKU: n/a -
Battery Charger & Supply, Consumable Electronics
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
- Input Voltage: 100V-240V AC
- Output Voltage: 5V 2A DC
- Plug Standard: 2.1/5.5mm Plug
- Compatible: Arduino UNO & MEGA
Features:
- High quality graded AC to DC power adapter.
- Simple to use, just plug-in, charge up and play.
- Light in weight and with heavy-duty cable-wire.
- Short circuit, over-voltage and over-current protection.
- Incredibly low fault rates this power supply is a regulated centre positive power supply.
- Compatible with Dth,STB,CCTV,toys,broadband,laptop,DVD,tablet,TV tuner card,cordless phones,LCD monitor,scanner,cell phone,printers.
Package Include:
- 1 x 5V 2A Adapter
SKU: n/a -
Battery Charger & Supply, Consumable Electronics
CR2032 3V Coin Cell Battery in Pakistan
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energy density and high voltage, a single 2032 Lithium Coin battery can replace two, three or more conventional batteries. If you’re looking for CR2032 batteries that are designed to provide reliable and long-lasting power, you’re at the right place.
For More Visit:
Specifications:
- Model: CR2032
- Chemistry: Lithium
- Output Voltage: 3V
Features:
- 3 Years Shelf Life
- No mercury added
- High leak protection
- Fresh CR2032 Battery
- Have Full 3 Volts Charge
Applications:
- Key fob for cars
- Wireless doorbell for house
- CMOS battery in computers
- Glucometers
- Digital thermometers
- Digital altimeter
- Cyclocomputers
- Heart rate monitors
Caution:
- Non rechargeable
- Do not throw the cell into fire
- Keep the cell in a dark, cool and dry place
- Use finger socks or non-metallic tweezers
- If swallowed cell your doctor immediately
- Wipe the cell with dry cloth and set property confirming ends (+ -)
Package Include:
- 1 x CR2032 3V Coin Cell Battery
Best Online Shopping Website for CR2032 3V Coin Cell Battery in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Battery Charger & Supply, Consumable Electronics
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
Battery Charger & Supply, Consumable ElectronicsThermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying a dc power source to a tec, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Using this TEC TEC1-12706 Thermoelectric cooler or thermoelectric Peltier get ice cold in minutes or heat to boiling by simply reversing the polarity.TEC12706 Cooling refrigeration Plate used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink water block to avoid burned one side is cooling (Printed model number)and another side is heating (Printed no word) when working. Please radiating the heating side
Note:
Power on the device only with the proper heat-sink setup to avoid any burning/damage or malfunction of the device, use a fine heat sink (such as in CPU fans) with thermal paste, and power the device. Use a 12v dc power supply to power the tec1-12706. Use one aa battery for 10- 20 seconds to power on the device to find the hot /cold side
Features Of TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 50-60 Watt:
- Ceramics thermoelectric Cooler semiconductor module TEC1-12706
- Small module.
- Its work is characterized by side refrigeration and side fever.
- Hot and cold on both sides of the temperature difference of 68 degrees
- Connected to the 12-volt power supply cooling piece on both sides there will be the difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise, it will cause cooler internal overheating and burning.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Fitted with 6-inch insulated leads
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
SKU: n/a -
Battery Charger & Supply, Consumable Electronics
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Battery Charger & Supply, Consumable ElectronicsThermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
- Ceramics thermoelectric Cooler semiconductor module TEC1-12706
- Small module.
- Its work is characterized by side refrigeration and side fever.
- Hot and cold on both sides of the temperature difference of 68 degrees
- Connected to the 12-volt power supply cooling piece on both sides there will be the difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise, it will cause cooler internal overheating and burning.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Fitted with 6-inch insulated leads
- Life expectancy: 200,000 hours.
- Failure rate based on longtime testings: 0.2%.
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
- Product name: thermoelectric cooler plate module
- Model: TEC1-12715
- Color: white
- Couples: 127
- Voltage: 12V
- Umax: 15.4V
- Imax: 15A
- Max power consumption: 231W
- Tmax: 70°C
- Qcmax △T=0(W): 137W
- Size: 40 x 40 x 3.3mm
- Weight: 50g
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
SKU: n/a