Motor and Robotics
Showing 1–15 of 17 results
-
Boards and Programmer, Electronic Components, Motor and Robotics, Students Corner
2WD Arduino Smart Robotic Car Kit
Boards and Programmer, Electronic Components, Motor and Robotics, Students Corner2WD Arduino Smart Robotic Car Kit
Unleash your creativity with our 2WD Arduino Smart Robotic Car Kit. Perfect for beginners and enthusiasts alike, it offers an exciting platform to build and program your own intelligent robot. Dive into the world of robotics today!
SKU: n/a -
Motor and Robotics, Students Corner
5V 4-phase 28YBJ-48 Stepper motor with ULN2003 Driver Board
Description:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board
Motor:
Diameter: 28mm
Voltage: 5V
Step angle: 5.625 x 1/64
Reduction ratio: 1/64
ULN2003 driver board:
A, B, C, D LED indication Four-phase stepper motor work status
Size: 31x35mm
Package included:
1 x ULN2003 driver board
1 x 28BYJ-48 stepper motor
SKU: n/a -
Motor and Robotics, Students Corner
775 DC Spindle Motor
775 DC Spindle Motor Specifications:
- Shaft: approx. 5mm
- Current position: 4.7A
- Charging power: 20.4W
- Rated Voltage: 12V-36V
- Installation hole diameter: M4
- Speed: 4000 ~ 12000 rev / min
- Motor Diameter: Approx. 45mm
- Motor step height: approx. 5mm
- For: 1610/2417/3018 CNC Router Machine
- Stepped Motor Diameter: Approx. 17.4mm
- Motor length: approx. 67mm (without shaft)
- Motor shaft length: approx. 16mm
- Distance between terminals: approx. 34mm
- Mounting hole Pitch: approx. 29mm
- 12V charging current: 1.7A (starting current 2.2A)
- It is recommended to use 12 to 24V for Longer Life.
Package Include:
- 1 x 775 DC Spindle Motor
Best Online Shopping Website for 775 DC Spindle High Speed Motor in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Motor and Robotics, Students Corner
D2-1 Smart Intelligent Trcking Line Follower Sensor Obstacle Avoidance Module For Arduino Reflectance Optical Switch Robot Car
Motor and Robotics, Students CornerD2-1 Smart Intelligent Trcking Line Follower Sensor Obstacle Avoidance Module For Arduino Reflectance Optical Switch Robot Car
Features:
1. Using photosensitive resistance device, high sensitivity and stable performance.
2. LM393 is a dual voltage comparator integrated circuit, which consists of two independent precision voltage comparator.
3. Complet smart tracking line car kit,easy to install.
4. DC motor with gear reduction,easy to control.
5. Widely used in experiment,industry,school,electronic DIY,robots,remote control cars etc.
Description:
LM393 is a dual voltage comparator integrated circuit,using photosensitive resistance device,with gear reduction,easy to control,widely used in experiment, industry, school, electronic DIY, robots, remote control cars etc.
Specification:
Model:
Color:blue&yellow
Device:Photosensitive resistance
Motor:DC motor with gear reduction
Package Information:
Package Size: 115 x 85 x 25mm/ 4.53 x 3.35 x 0.98in
Package Weight:60g/2.12oz
Polybag Package
Package Included:
1 x D2-1 Tracking Line Car Kit
SKU: n/a -
Motor and Robotics, Students Corner
JGA25-370 400RPM 2.2KG/cm
This easy-to-mount JGA25-370 DC gearmotor is great for building robots and it comes in a variety of configurations that suit even the most exigent designs.
This motor features a D-shaped output shaft.
Specifications
- Operating voltage: between 6 V and 18 V
- Nominal voltage: 12 V
- Free-run speed at 12 V: 400 RPM
- Free-run current at 12 V: 50 mA
- Stall current at 12V: 1200 mA
- Stall torque at 12V: 2.2 kg.cm
- Gear ratio: 1:21
- Reductor size: 19 mm
- Weight: 84 g
For other variations of this motor see the JGA25-370 gearmotor selector.
Downloads
SKU: n/a -
Motor and Robotics, Students Corner
MG-90 servo
Note:
Servo all metal means spindle and gearwheel all is iron made,
– Full Ball Bearing
– Light Weight
– Less Noise
– Connector Wire Length 250mm
Products Description:
For: Mini Car / Mini Ship / Helicopter & Airplane
Model: MG90S SG90 upgraded version
Weight: 12G
Speed: 4.8V&0.10sec/60 degrees; 6.0V&0.09sec/60 degree
Torque: 4.8V&1.6KG-cm; 6.0V&1.8kg-cm
Voltage: 4.8V6.0V
Connector Wire Length 250mm
Dimension: 22.6mm x 12.1mm x 22.5mm
Dead Band Width: 5 usec
Interface Specifications: JR / FP General
Gear Material: All metal
Accessories: Multi-arm, fixing screws
Scope: Helicopters KT, fluttering, gliding, small robots, and other models
Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane
Shipping list:
4/5/10/20 * MG90S All metal Mini Micro ServoSKU: n/a -
Motor and Robotics, Students Corner
Monster Shield 15A VNH2SP30
Description
This VNH2SP30 Monster Moto Driver Shield has NH3SP30 chip which enables it to drive one DC motor. It has an extremely high current capacity of 14A per channel (peak of 30A for few seconds). The thermal heating is minimal uptill 4 to 5 amps. However it would need thermal dissipation device like heat sink or cooling fan for higher currents.
Also the difference in the standard Arduino Motor shield and Monster Motor shield is the change in the driving IC. In the standard Arduino Motor shield the IC used is L298 H bridge IC which has a current capacity of 1 A which is replaced by the VNH3DP30 chip with a 14A conitnuous current capacity with heat dissipation devices installed. This motor driver also has a thermal shutdown function possible as the thermal output is provided on the analog pin of arduino.
Features:
- Capable to drive two DC motors or one stepper motor
- Continuous current capacity 14 A
- Peak Current capacity 30 A
- Thermal Shutdown pin configured to provide output to Arduino Analog Pin
- Maximum Voltage is 16V
- Maximum PWM frequency is 30 Khz. For most of our Hi Torque DC motors 12 V, 10 khz PWM is recommended
Package Includes:
-
1 x VNH2SP30 DC Motor Driver Monster Moto Shield
SKU: n/a -
Motor and Robotics, Students Corner
NEMA 17 40 OZ stepper motor
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.8A at 6V, with holding torque 26Ncm (36.82oz.in).
Electrical Specification
- Manufacturer Part Number: 17HM15-0806S
- Motor Type: Unipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 26Ncm(36.82oz.in)
- Rated Current/phase: 0.8A
- Phase Resistance: 7.5ohms
- Inductance: 10mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 40mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 280g
Connection
A+O+A-B+O-B-REDBRWYELBLUORGGRNResources
- Full Datasheet: 17HM15-0806S.pdf
SKU: n/a -
Motor and Robotics, Students Corner
Sg90 Servo Motor
Description;
This is the most popular mini servo. Only weights 9 gram and gives you a 1.5kg.cm torque. Pretty strong regarding its size. Suitable for Beam type robot.
Features:
Operating speed: 0.3second/ 60degree
Stall Torque : 1.5kg/cm
Temperature range: 0 C_ 55 C
Dead band width: 10usec
Operating voltage: 4.2V~6V
Fit for ALL kind of R/C Toys
Connector Wire Length: 250mm
Package include:
1 or 2 x SG90 9G Servo MotorSKU: n/a -
Motor and Robotics, Students Corner
Stepper Motor Driver TB6600
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.
The stepper driver supports speed and direction control. You can set its micro-step and output current with 6 DIP switch. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.Note: this is an upgrade version of TB6600 Stepper Motor Driver.
Features:
- 9V-42V DC power supply.
- Output current: 0.5A-4.0A.
- Drive mode: Dual constant current PWM drive output.
- Strong anti-interference ability.
- Low vibration, low noise.
- Insulation resistance: >500MΩ at normal temperature and pressure.
- Insulation strength: 500V/min at normal temperature and pressure.
- With overheating, overcurrent, under-voltage lockout, input voltage anti-reverse protection, and other functions.
- Can drive 4-wire, 6-wire, 8-wire stepper motors.
Environmental Requirments:
- Cooling method: natural cooling or forced air cooling.
- Storage temperature: -20°C-65° C.
- Ambient humidity: <80% RH, no condensation, no frost.
- Vibration: maximum not exceeding 5.7m/S2.
- Use occasions: Avoid dust, oil and corrosive gases, and prohibit flammable gases and conductive dust.
Wiring Requirments:
- The pulse and direction signal lines and the motor and power lines are not allowed to be side by side, preferably separated by at least 10 cm.
- If one power supply is used for multiple drives, parallel connections should be made at the power supply. It is not allowed to go to one another and then to another chain connection.
- Do not plug or unplug the drive power terminal when the power is on. When the powered motor stops, there is still a large current flowing through the coil. Pulling the power terminal will burn the driver.
- It is strictly forbidden to access terminal after wire head plus tin, otherwise, the terminal may be overheated and damaged due to the contact resistance becomes larger.
- The wiring heads should not be exposed outside the terminals to prevent accidental short circuits and damage the drive.
Package Includes:
- 1 x TB6600 Stepper Motor Driver in Pakistan
SKU: n/a -
Motor and Robotics, Students Corner
TB6560 3A Stepper Motor Driver Module
Description
TB6560 is a very common and easy to use stepper motor driver for 4 wire stepper motor or hybrid stepper motor for cnc?applications.The current level is adjustable to meet your various application requirements; Automatic semi-flow adjustable; The use of high-speed optical coupling 6N137, ensuring high speed without losing step; The board printed setup instructions, no user manual can operate; Using thick fine-toothed radiator, good heat dissipation.
Specifications:
- Working voltage :DC 10V-35V.Recommend Switching Power Supply DC24V
- 6N137 high-speed OptoCoupler , to ensure a high speed without step out.
- New original Toshiba TB6560AHQ chip, low-voltage shutdown, of overheating parking and over-current protection circuit to ensure optimal performance.
- Rated output: ? 3A? ,peak 3.5A.
- For 42,57,86 Stepper within 3A? 2/4 -phase / 4 wire / 6 wire stepper motor, not fit for more than 3A stepper motor.
- Automatic half-decay.
- Excitation Mode: synchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.
- Volume: 50 x 75 x 35 ( MM)
Package Include:
- 1 x TB6560 3A Stepper Motor Driver Module
Best Online Shopping Website TB6560 3A Stepper Motor Driver Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a