-38%

Mifare 13.56MHz RFID Classic Plain White Card

Availability:

Out of stock


  • 13.56MHz contactless RFID smart card with MIFARE Classic compatible technology
  • Plain white PVC card, ready for printing, labeling, or custom branding
  • Standard credit card style form factor that fits most card holders
  • Passive design powered by the reader field, with no battery required
  • Supports read and write with compatible MIFARE Classic readers
  • Ideal for access control, attendance, and identification systems
  • Works with Arduino, ESP32, Raspberry Pi, and other compatible platforms
WhatsAppChat on WhatsApp

₨ 50 ₨ 80

Out of stock

Quick answer

The Mifare 13.56MHz RFID Classic plain white card is a passive contactless smart card for access control, attendance and NFC projects. It costs Rs. 50, checked in September 2026, and works with compatible MIFARE Classic readers. Buy it when you need a printable 13.56MHz card for Arduino, ESP32 or Raspberry Pi builds.

Product Overview

The Mifare 13.56MHz RFID Classic Plain White Card is a contactless RFID smart card designed for identification, access control, attendance systems, automation projects, and NFC/RFID based applications. Its standard card format makes it convenient for use with compatible 13.56MHz RFID readers and modules.

The card operates wirelessly, allowing data to be read or written without physical contact. Its plain white surface is suitable for printing, labeling, or customization for identification and access control applications.

Key Features of the Mifare 13.56MHz RFID Classic Card

  • 13.56MHz contactless RFID smart card
  • MIFARE Classic compatible card technology
  • Plain white card design
  • Standard credit card style form factor
  • Contactless operation with no physical connection required
  • Suitable for RFID readers and access control systems
  • Reusable for compatible read and write applications
  • Convenient for attendance and identification projects
  • Suitable for Arduino, ESP32, Raspberry Pi, and other compatible platforms
  • Lightweight and easy to carry

Technical Specifications

  • Product Type: RFID Smart Card
  • Technology: MIFARE Classic
  • Operating Frequency: 13.56MHz
  • Communication: Contactless RFID
  • Card Type: Plain White PVC Card
  • Interface: Wireless / Contactless
  • Form Factor: Standard RFID card
  • Read/Write: Supported with compatible MIFARE Classic readers
  • Power: Passive, powered by the RFID reader field
  • Printing: Plain white surface suitable for labeling or custom printing
  • Compatibility: Compatible with suitable 13.56MHz MIFARE Classic RFID readers

How the Mifare 13.56MHz RFID Classic Card Works

The MIFARE RFID card is a passive contactless device, which means it does not require a battery. When the card is brought close to a compatible 13.56MHz RFID reader, the reader generates an electromagnetic field that powers the card’s internal chip.

The card and reader then communicate wirelessly, allowing the reader to identify the card and, where supported, access stored data according to the card’s memory structure and security configuration.

Applications

  • RFID access control systems
  • Employee and student attendance systems
  • Identification and authentication projects
  • Arduino RFID projects
  • ESP32 RFID projects
  • Raspberry Pi RFID applications
  • Door access systems
  • Electronic locking systems
  • Library and inventory systems
  • School and college automation projects
  • RFID based automation
  • IoT identification systems
  • DIY security and access control projects

Advantages

  • Contactless and convenient operation
  • No battery required
  • Compact and lightweight card format
  • Easy to use with compatible RFID readers
  • Reusable for many RFID applications
  • Plain white surface allows customization
  • Suitable for educational, commercial, and DIY projects

Usage Tips

  • Use a compatible 13.56MHz MIFARE Classic RFID reader.
  • Keep the card reasonably close to the reader’s antenna for reliable detection.
  • Avoid bending, cutting, or physically damaging the card.
  • Do not assume compatibility with every 13.56MHz RFID or NFC reader; check the supported card technology first.
  • For access control applications, configure the card and reader according to the security requirements of the system.

Note: Images are for illustration purposes only.

Which card should I pick for my project?

Pick the Mifare 13.56MHz RFID Classic plain white card when your reader or module is built for MIFARE Classic at 13.56MHz. It is the usual choice for access control, attendance and student RFID projects.

Before you order, check three things:

  • Frequency: this card is 13.56MHz, not 125kHz. A 125kHz reader will not read it.
  • Chip family: the reader must support MIFARE Classic, not just any 13.56MHz standard.
  • Purpose: plain white cards suit printing, labeling and branding. For indicator lights or buttons on the same build, see 5mm LEDs and tactile push button switches.

If your project only needs a simple ID read, this card is enough. If you need stored data and security sectors, confirm your reader supports read and write on MIFARE Classic first.

How do I install and use the card?

There is no installation in the wiring sense. The card is passive, so it has no battery and no connections. You bring it close to a compatible 13.56MHz MIFARE Classic reader, and the reader’s field powers the chip.

  1. Connect your reader or module to your Arduino, ESP32 or Raspberry Pi board.
  2. Load a sketch or library that supports MIFARE Classic.
  3. Hold the card near the reader antenna until it is detected.
  4. For access control, register the card UID in your system and set the security you need.

Keep the card flat and avoid bending or cutting it. Range depends on the reader antenna and power, so test your own setup. If you are building the reader side on a breadboard, metal film resistors cover pull-up and current limiting needs.

Price, delivery and warranty in Pakistan

The card costs Rs. 50, checked in September 2026, and is in stock. College Road Electronics delivers nationwide across Pakistan at a flat-rate shipping of Rs 350.

Orders ship from the shop on College Road, Rawalpindi. Students building school, college and university projects can ask for guidance on choosing a matching reader before ordering. For warranty terms on this card, contact the shop directly, since the product data does not list a warranty period. You can also browse more parts in the Accessories category.

Frequently Asked Questions

What is the Mifare 13.56MHz RFID Classic card used for?

It is used for access control, employee and student attendance, identification, door access, library and inventory systems, and RFID projects on Arduino, ESP32 and Raspberry Pi. The plain white surface lets you print or label each card. It is a passive card, so it needs no battery and is powered by the reader field.

Will this card work with my 13.56MHz RFID reader?

Only if your reader supports MIFARE Classic. Many 13.56MHz readers do, but some NFC readers and modules support other card types instead. Check the reader datasheet or product page for MIFARE Classic support before buying. If your reader is 125kHz, this card will not work at all.

Can I write data to this card, or is it read only?

Read and write are supported with compatible MIFARE Classic readers. You can store and update data according to the card’s memory structure and security configuration. For simple attendance or door access, reading the card ID is often enough. Set the sector keys properly if the card protects stored data.

How much does the Mifare 13.56MHz RFID Classic card cost in Pakistan?

The card is priced at Rs. 50, checked in September 2026, and is in stock. College Road Electronics delivers nationwide across Pakistan at a flat-rate shipping of Rs 350. For current pricing on larger quantities, contact the shop before placing your order.

Can I print on the plain white card?

Yes. The card has a plain white PVC surface that suits labeling, custom printing and branding. It uses the standard credit card style form factor, so it fits most card holders and common card printers. Avoid bending or cutting the card, since that can damage the internal chip and antenna.

Category:
College Road Electronics

4.81

(608 Reviews)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop