- Boards, Modules and Accessories, Boards and Programmers
Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Boards, Modules and Accessories, Boards and ProgrammersArduino UNO CNC Shield V3 A4988 Driver Expansion Board
– Designed for Arduino Uno R3 for easy plug-and-play setup
– Supports up to 4 stepper drivers (X, Y, Z, A)
– Compatible with GRBL firmware and external drivers (A4988, DRV8825)
– Micro-stepping jumpers for fine motion control
– End-stop inputs for all axes and labeled pinouts for simple wiring
– Compact 70mm x 55mm board ideal for DIY CNC, laser engravers, and roboticsSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 DIP Board with Free USB Cable
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 SMD Board with Free USB Cable
– Compact Arduino Uno R3 SMD board with ATmega328P SMD microcontroller
– Free USB Type B cable included for plug-and-play programming
– 14 digital I/O (6 PWM) and 6 analog inputs for sensors and actuators
– Stable 5V operation, supports 7–12V input via barrel jack or USB
– Full Arduino IDE support and compatibility with standard libraries
– Durable surface-mount design ideal for classrooms, kits, and projectsSKU: n/a
Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Only 1 left in stock
– Designed for Arduino Uno R3 for easy plug-and-play setup
– Supports up to 4 stepper drivers (X, Y, Z, A)
– Compatible with GRBL firmware and external drivers (A4988, DRV8825)
– Micro-stepping jumpers for fine motion control
– End-stop inputs for all axes and labeled pinouts for simple wiring
– Compact 70mm x 55mm board ideal for DIY CNC, laser engravers, and robotics
₨ 350 ₨ 450
Only 1 left in stock
Arduino Uno CNC Shield V3 – Overview
Take precise control of your CNC projects with the Arduino Uno CNC Shield V3. Built for makers, hobbyists, educators, and small-scale professionals, this CNC control board for Arduino simplifies stepper motor management and integrates seamlessly with GRBL firmware. It is ideal for CNC plotters, laser engravers, small mills, 3D printer experiments, and automation demos.
Key Benefits
- Simplified wiring and labeled pinouts to speed up build time
- Plug-and-play support for A4988 and DRV8825 stepper drivers (drivers not included)
- Micro-stepping control via jumpers for smoother, quieter motion
- Support for end-stop switches on every axis to protect your machine
- Compact form factor that mounts directly to an Arduino Uno R3
Compatibility and Firmware
This Arduino CNC Shield V3 is designed specifically to work with the Arduino Uno R3 and is fully compatible with GRBL firmware. GRBL provides a reliable G-code interpreter so your machine follows precise toolpaths without complex configuration. Use common control software that supports GRBL to drive your machine from PC, Mac, or Raspberry Pi.
Supported Drivers
- A4988 (popular for budget stepper control)
- DRV8825 (higher current options and microstepping)
Features and Hardware Details
- Supports up to 4 stepper motor drivers – X, Y, Z, and A (fourth axis)
- Jumpers for micro-stepping selection (full, half, quarter, eighth, sixteenth depending on driver)
- End-stop input connectors for all axes for homing and safety
- Onboard power and reset pins for easy power management
- Clean CNC shield V3 pinout for quick troubleshooting and upgrades
- Standard header pin design for mounting to Arduino Uno R3
Specifications
- Model: CNC Shield V3
- Compatible With: Arduino Uno R3
- Drivers Supported: A4988, DRV8825 (not included)
- Motor Control: Up to 4 stepper motors
- Microstep Settings: Configurable via jumpers
- Size: 70mm x 55mm (approx.)
- Mounting: Standard header pin design
Best Uses
The Arduino Uno CNC Shield V3 is perfect for:
- CNC plotters and laser engravers
- 3-axis and 4-axis desktop CNC machines
- Arduino CNC controller builds and upgrades
- 3D printer and robotics prototyping
- Educational labs and industrial automation kits
Why Buy from Colgroad
Colgroad offers reliable Arduino-compatible electronics in Pakistan with careful testing, secure packaging, and fast delivery. We support makers and builders with quality parts, clear product information, and responsive customer service to help you get your CNC project moving faster.
Getting Started – Quick Setup Guide
- Mount the CNC Shield V3 onto an Arduino Uno R3 using the header pins.
- Install your stepper driver modules (A4988 or DRV8825) into the shield sockets, ensuring orientation is correct.
- Set micro-step jumpers according to desired resolution and driver capability.
- Wire motor coils, end-stops, and power supply following the labeled pinouts on the shield.
- Upload GRBL firmware to the Arduino Uno and connect with a GRBL-compatible control application.
- Tune motor current and steps per millimeter in firmware or software for accurate motion.
Tips and Safety
- Always disconnect power before inserting or removing driver modules.
- Set driver current limits to match your stepper motors to avoid overheating.
- Double-check motor coil wiring to prevent skipped steps or damage.
- Use proper heat sinks on drivers when running higher currents.
Order Now
Level up your CNC build with the Arduino Uno CNC Shield V3. Order your CNC Shield from Colgroad today and get reliable control, clean wiring, and GRBL compatibility for smoother, more accurate motion.
Note: Images are for illustration purposes only.
1 review for Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.80 rating from 570 reviews
- Beginner STEM Kits
T-M46 Traffic Light DIY Learning Kit
– Hands-on T-M46 Traffic Light DIY Kit for STEM learning
– Assembles into a working red, yellow, and green LED traffic signal
– Teaches timing circuits, sequencing, and basic electronics principles
– Includes PCB, LEDs, resistors, capacitors, transistors or IC, jumper wires, and battery holder
– Battery operated (3V–9V) and beginner-friendly assembly
– Ideal for classroom demos, school science fairs, and electronics hobbyistsSKU: n/a - Accessories
BC548 NPN Transistor (30V 0.1A)
– General-purpose NPN bipolar junction transistor for low-power switching and amplification
– Maximum Collector-Emitter Voltage (Vce): 30V
– Maximum Collector Current (Ic): 100mA; Power Dissipation: 500mW
– DC Current Gain (hFE): 110–800 depending on variant (A, B, C)
– TO-92 through-hole package — ideal for breadboards and prototyping
– Common uses: audio stages, LED drivers, relay drivers, signal amplification, DIY and educational projectsSKU: n/a - Sensors And Modules, Wireless Communication
Mini Solar Panel Plate 2V 225mA 0.45W (64x46mm)
- Compact mini solar panel with 2V output voltage and 225mA maximum current
- Maximum power output of 0.45W for low-power electronic projects
- Small dimensions of 64 x 46mm, perfect for portable and DIY applications
- Converts sunlight into clean, renewable electrical energy using photovoltaic technology
- Ideal for educational projects, Arduino experiments, robotics, and battery charging
- Can be connected in series or parallel to increase voltage or current output
- Lightweight, durable, and environmentally friendly solar energy solution
SKU: n/a - Integrated Circuits (ICs)
7448 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD inputs into outputs for driving 7-segment LED displays
– TTL logic family, operates at 5 V typical
– Includes lamp test, blanking input and ripple blanking features
– Designed for standard common anode 7-segment LED indicators
– 16-pin DIP package, breadboard and through-hole friendly
– Ideal for educational projects, counters, clocks and microcontroller displaysSKU: n/a - Intermediate Electronics Kits
Arduino Beginner Kit With Component Box
– Complete beginner kit including Arduino UNO R3 and a full component box
– ATmega328P microcontroller for versatile project performance
– Breadboard, jumper wires, USB cable and power supply for quick prototyping
– Sensors and modules: temperature, light, motion, ultrasonic, buzzers, relays, and motors
– Interactive inputs: push buttons, toggles, potentiometer and 16×2 LCD
– Detailed tutorials, example projects and online resources for STEM learningSKU: n/a - Boards, Modules and Accessories, Wireless Communication
RC522 13.56MHz RFID Sensor Module with Reader Card
Boards, Modules and Accessories, Wireless CommunicationRC522 13.56MHz RFID Sensor Module with Reader Card
- Supports ISO14443A/MIFARE standards for broad tag and card compatibility.
- Fast SPI interface for simple integration with Arduino, Raspberry Pi, and other MCUs.
- Read and write capabilities for flexible access control and data storage.
- Compact, low-power design ideal for battery-operated and embedded projects.
- Built-in antenna with reliable detection up to 5 cm (depending on tag and environment).
SKU: n/a
Related products
- Batteries, Cells and Power Supply, Boards, Modules and Accessories
4x 18650 Battery Case Cell Holder
– Holds four 18650 lithium-ion cells (batteries not included)
– Spring-loaded contacts for reliable electrical connection and vibration resistance
– Solder-free terminals for quick installation and removal
– Durable ABS/plastic construction for long service life
– Compact, space-saving design for portable electronics
– Flexible mounting: screw holes and adhesive backing optionsSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Stepper Motor (NEMA 17) (40mm, 48mm) Brand New
Boards, Modules and Accessories, Motors, Drivers and WheelsStepper Motor (NEMA 17) (40mm, 48mm) Brand New
- High precision 1.8° step angle (200 steps/rev) for accurate motion control.
- High torque output for reliable holding and steady performance.
- Compact NEMA 17 form factor — available in 40mm and 48mm heights.
- Bipolar 4-wire configuration for easy integration with common drivers.
- Durable metal construction built for continuous use and longevity.
- Low vibration and noise for smooth operation in printers, CNCs and robots.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 4-Channel Arduino Relay Module Board
- Control up to 4 devices independently with four relay channels.
- Supports 250V AC/10A or 30V DC/10A per channel for high-power loads.
- Optocoupler isolation protects your microcontroller from high-voltage circuits.
- LED indicators provide clear visual status for each relay channel.
- Standard 5V TTL inputs — compatible with Arduino, Raspberry Pi and most MCUs.
- Screw terminals and mounting holes for secure wiring and easy installation.
SKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
A2212 1000KV BLDC Brushless DC Drone Motor
Boards, Modules and Accessories, RC Drones and AccessoriesA2212 1000KV BLDC Brushless DC Drone Motor
- 1000KV brushless design for efficient, high-RPM performance
- Lightweight A2212 form factor for small drones and RC planes
- Smooth, low-vibration operation for stable flight and longer motor life
- Compatible with 2S to 3S LiPo batteries and common 20A ESCs
- Durable construction with standard A2212 mounting pattern for easy replacement
- Balanced thrust and runtime ideal for hobbyist multirotors and fixed-wing models
SKU: n/a
Ahmad Ali (verified owner) –
Best Components in best price
Ahmad Ali –