Electronics Components
Showing 1–15 of 25 resultsSorted by popularity
- Boards, Modules and Accessories, Accessories
400 Tie Points Half Sized Solderless Breadboard
– 400 tie points for small-to-medium circuits
– Half-size solderless breadboard ideal for beginners and prototyping
– Dual power rails for easy power distribution
– Nickel-plated contacts for secure, reliable connections
– Durable, heat-resistant ABS plastic housing
– Compatible with Arduino, Raspberry Pi, sensors; reusable and no soldering requiredSKU: n/a - STEM & DIY Learning Kits
Arduino Upgraded Learning Kit With Component Box
– Complete Arduino UNO SMD board with ATmega328P microcontroller for reliable Arduino IDE compatibility.
– Large F240 component box with sensors, modules, motors and organized storage.
– High-quality MB102 breadboard, 80+ jumper wires, USB cable and multiple power options.
– Includes LCD, servo, stepper, relays, ultrasonic, DHT11 and input devices for diverse projects.
– Step-by-step manuals, example projects and community support for beginner-friendly learning.
– Ideal for education, DIY, prototyping, STEM lessons and makerspace workshops.SKU: n/a - Accessories
1N4001 Rectifier Diode (50V 1A)
– General-purpose 1N4001 silicon rectifier diode (50V, 1A)
– Continuous forward current: 1A; Peak surge current: 30A
– Low forward voltage drop (~1.1V) for efficient rectification
– DO-41 axial lead package for easy through-hole mounting
– Ideal for AC to DC conversion, power supplies and battery chargers
– Common use: reverse polarity protection and hobby electronics projectsSKU: n/a - Accessories
2N2222 NPN Transistor (60V 0.8A)
– General-purpose NPN BJT for switching and amplification
– Collector-Emitter Voltage: 60V
– Collector Current: up to 0.8A
– Fast switching speed, ideal for PWM and digital logic
– Compact TO-92 package for breadboards and PCBs
– Great for robotics, relay drivers, LED and motor controlSKU: n/a - Sensors And Modules
LM35DZ Temperature Sensor
- Linear Celsius output: 10mV per °C for direct temperature readings
- High accuracy: ±0.5°C at 25°C for reliable measurements
- Operating range: 0°C to 100°C; supply 4V to 30V
- Low power consumption: typically less than 60µA to minimize self-heating
- Compact TO-92 package for easy mounting in circuits
- No external calibration required; simple integration with microcontrollers
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and other microcontrollers
SKU: n/a - Buck, Boost Converters and Regulators
LM317 Adjustable Voltage Regulator DC-DC
– Adjustable output voltage: 1.25V to 37V
– Output current up to 1.5A
– Built-in current limiting and thermal protection
– High stability and reliable performance
– Ideal for power supplies, battery chargers, and LED drivers
– TO-220 package, easy to mount and heat-sinkSKU: n/a - Integrated Circuits (ICs)
7486 Quad 2-Input XOR Gate IC (DIP)
- Quad 2-input XOR gates in a single DIP-14 package
- Standard TTL logic (74xx) with typical +5V operation
- Fast switching and reliable logic thresholds for digital circuits
- Ideal for parity generation, adders, encoders, and error detection
- Breadboard and PCB friendly DIP-14 package for prototyping
- Interfaces easily with other TTL/CMOS logic with proper level considerations
SKU: n/a - Integrated Circuits (ICs)
7485 4-Bit Magnitude Comparator IC (DIP)
– Compares two 4-bit binary numbers (A and B)
– Outputs A B logic signals
– TTL-compatible logic levels for reliable operation
– Cascadable design for comparisons of larger bit-widths
– DIP package ideal for breadboards and prototyping
– Suitable for sorting, ALU functions, and decision circuitsSKU: n/a - Integrated Circuits (ICs)
7474 Dual D-Type Flip-Flop IC (DIP)
- Dual independent edge-triggered D-type flip-flops in a single DIP-14 package.
- Captures and stores the D input on the rising edge of the clock.
- Asynchronous Preset (PR) and Clear (CLR) inputs for forced set/reset.
- Complementary Q and Q9 outputs for true and inverted signals.
- Standard TTL operation at +5V with fast switching and low propagation delay.
- Breadboard and PCB friendly 14-pin DIP, easy interfacing with 74xx logic.
SKU: n/a - Integrated Circuits (ICs)
7447 BCD to 7-Segment Decoder/Driver IC (DIP)
- Converts 4-bit BCD (A, B, C, D) into seven-segment outputs for digits 0-9.
- Designed for common-anode 7-segment LED displays.
- Open-collector, active-LOW segment outputs (a–g) to directly sink current with resistors.
- TTL-compatible inputs and fast switching at 5 V supply.
- Includes LT (Lamp Test), BI̅ (Blanking Input), and RBI/RBO for blanking and leading-zero suppression.
- Breadboard-friendly DIP-16 package for rapid prototyping and educational projects.
SKU: n/a - Integrated Circuits (ICs)
7408 Quad 2-Input AND Gate IC (DIP)
- Four independent 2-input AND gates in a single DIP-14 package
- Standard TTL 74xx family device; operates on 5V supply
- High-speed switching for dependable digital logic performance
- Inputs and outputs compatible with common TTL and CMOS devices
- Breadboard- and PCB-friendly DIP-14 package for easy prototyping
- Ideal for education, lab kits, microcontroller interfacing, and control logic
SKU: n/a - Integrated Circuits (ICs)
7404 Hex Inverter NOT Gate IC (DIP)
- 7404 Hex Inverter NOT Gate IC with six independent logic inverters
- TTL 74xx family, standard-performance logic for reliable results
- Operates from 4.75 V to 5.25 V (typical 5 V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- High-speed switching for waveform shaping and timing circuits
- Ideal for prototyping, educational labs, and DIY electronics projects
SKU: n/a