Boards, Modules and Accessories
Showing 106–120 of 618 resultsSorted by popularity
- Boards, Modules and Accessories, Motors, Drivers and Wheels
SG90 9g Micro Servo Motor (360 Degree Rotation)
Boards, Modules and Accessories, Motors, Drivers and WheelsSG90 9g Micro Servo Motor (360 Degree Rotation)
- Compact servo with 360-degree continuous rotation for full directional control.
- Lightweight (approx. 9g) and small form factor for tight builds.
- Durable construction for reliable, long-lasting operation.
- Simple PWM control compatible with Arduino, Raspberry Pi and other microcontrollers.
- Low power consumption, runs on 4.8V to 6V—ideal for battery projects.
- Great for wheeled robots, pan-tilt systems, conveyors and DIY automation.
SKU: n/a - Accessories
470μF 35V Electrolytic Polarized Capacitor
– 470 microfarad capacitance for strong energy storage and smoothing
– 35V rated voltage for medium-voltage DC circuits
– Polarized electrolytic design for efficient decoupling and filtering
– Radial lead package for easy PCB and breadboard mounting
– Compact size suited to space-constrained designs
– Ideal for power supplies, audio amps, regulators, and DIY projectsSKU: n/a - Sensors And Modules
LM35DZ Temperature Sensor
- Linear Celsius output: 10mV per °C for direct temperature readings
- High accuracy: ±0.5°C at 25°C for reliable measurements
- Operating range: 0°C to 100°C; supply 4V to 30V
- Low power consumption: typically less than 60µA to minimize self-heating
- Compact TO-92 package for easy mounting in circuits
- No external calibration required; simple integration with microcontrollers
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and other microcontrollers
SKU: n/a - Accessories, Boards, Modules and Accessories
AC-DC Power Supply Adapter 12V 2A
– Stable 12V DC output, 2A (24W) for consistent device performance
– Universal 100–240V AC input for worldwide compatibility
– Compact, durable design fits tight spaces and reduces heat
– Built-in short-circuit, overload, and overheat protection for safety
– Standard center-positive DC barrel connector with detachable power cord for easy setup
– Ideal for LED strips, routers, security cameras, and DIY electronics projectsSKU: n/a - Accessories
433MHz Antenna for LoRa Ra-02 Module
– Optimized for the 433 MHz ISM band specially for LoRa RA-02 modules
– Extends transmission and reception range over PCB or onboard antennas
– High efficiency design with low signal loss and stable radiation pattern
– Compact, lightweight and easy to integrate into small enclosures
– Plug-and-play compatibility with RA-02 antenna interface
– Durable RF conductor with insulated coating, typically black finishSKU: n/a - Boards and Programmers
Arduino Uno R3 SMD Development Board
– Compact Arduino Uno R3 with ATmega328P in SMD package for durable, space-saving designs
– 14 digital I/O pins (6 PWM) and 6 analog inputs for versatile sensor and actuator control
– USB interface for easy programming and serial communication
– Compatible with Arduino IDE, shields, modules, and popular libraries
– Can be powered by USB or external 7–12V adapter; built-in regulator and auto-reset
– Ideal for prototyping, robotics, IoT projects, education, and hobby electronicsSKU: n/a - Accessories
BC557 PNP Transistor (45V 0.1A)
- General-purpose PNP bipolar junction transistor for low-power circuits
- Maximum collector-emitter voltage: 45V
- Maximum collector current: 100mA (0.1A)
- Low-noise performance and high DC current gain (hFE 110–800)
- Power dissipation: 500mW in TO-92 package
- Ideal for switching, signal processing, and small-signal amplification
SKU: n/a - Accessories
DC Barrel Power Jack Male Connector Wire
– Standard 5.5mm x 2.1mm male DC plug for wide compatibility
– Pre-wired with red and black color-coded leads to save time
– High-conductivity copper wires for stable DC power delivery
– Robust, bend-resistant build and secure fit to prevent disconnection
– Ideal for Arduino, Raspberry Pi, ESP32, CCTV, LED strips, routers and DIY projects
– Ready-to-use solution that eliminates soldering and speeds up installationsSKU: n/a - Motors, Drivers and Wheels
33mm Rubber Wheel for N20 DC Gear Motor
– Precision 33mm rubber wheel designed for N20 DC gear motors
– Smooth traction and reduced vibration for consistent motion
– Snug, no-slip fit for easy assembly and secure attachment
– Durable rubber compound for indoor and light outdoor use
– Ideal for robotics, RC vehicles, educational kits and prototypes
– Compact size for tight builds and small drive systemsSKU: n/a - Accessories
1000μF 25V Electrolytic Polarized Capacitor
• 1000µF capacitance for effective filtering and energy storage
• 25V DC rated for low to medium-voltage circuits
• Polarized electrolytic design with low ESR for reduced ripple
• Radial lead, through-hole package for easy PCB mounting
• Compact, durable construction for long operational life
• Ideal for power supplies, audio, motor driver, and microcontroller projectsSKU: n/a - Boards, Modules and Accessories, Accessories
10cm JST Female Connector Cable 2.54mm Pitch (4-Pin)
– 4-pin JST female connector for secure plug-and-play connections
– 100mm pre-soldered wires for quick installation
– Standard 2.54mm pitch compatible with JST male connectors
– Durable insulation and flexible copper conductors for stable signals
– Ideal for Arduino, sensors, displays, stepper motors, robotics, and drones
– Ready-made wiring solution that eliminates manual solderingSKU: n/a - Accessories
26AWG High Quality Blue Wire for DIY Projects (1meter)
- 26AWG copper conductor wire ideal for electronics prototyping and DIY circuits
- 1 meter length perfect for Arduino projects, breadboarding, and microcontroller wiring
- High-quality PVC insulation ensures durability and resistance to oxidation
- Blue color coding for easy identification in complex wiring setups
- Flexible and easy to solder for reliable electrical connections
- Suitable for low-current signal wiring and educational STEM projects
SKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
5A XL4015 Step-Down Buck Converter Module 4-38V to 0.8-30V
Boards, Modules and Accessories, Buck, Boost Converters and Regulators5A XL4015 Step-Down Buck Converter Module 4-38V to 0.8-30V
– High current output up to 5A for demanding loads
– Wide input range: 4V to 38V DC
– Adjustable output: 0.8V to 30V via potentiometer
– Up to 96% conversion efficiency to minimize heat
– Built-in overcurrent and thermal protection for safety
– Compact, durable design with integrated heat sinkSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TCRT5000 5-Channel IR Sensor Line Tracking Module
Boards, Modules and Accessories, Sensors And ModulesTCRT5000 5-Channel IR Sensor Line Tracking Module
– 5-channel TCRT5000 IR sensor module for reliable line tracking
– Fast infrared detection ideal for racing and maze-solving robots
– Simple pin labels and Arduino compatibility for quick setup
– Compact, lightweight design for easy mounting on robot bases
– Accurate detection of black lines on white surfaces for smooth control
– Perfect for DIY projects, robotics competitions, and automation prototypesSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
DC Gear Motor 280RPM and 630RPM (JGA25-371)
Boards, Modules and Accessories, Motors, Drivers and WheelsDC Gear Motor 280RPM and 630RPM (JGA25-371)
- Available in 280RPM and 630RPM speed variants
- High torque micro DC motor with integrated gearbox for precise motion
- Compact JGA25-371 form factor ideal for tight spaces and small robots
- Quiet and efficient operation for automation and DIY projects
- Durable construction for reliable, long-lasting performance
- Suitable for robotics, prototyping, conveyors and custom automation builds
SKU: n/a
