Boards, Modules and Accessories
Showing 76–90 of 618 resultsSorted by popularity
- Boards, Modules and Accessories, Wireless Communication
HC-05 Bluetooth Module HC05 HC 05
- Reliable two-way serial (UART) Bluetooth communication for Arduino and microcontrollers
- Supports Master and Slave modes for flexible device roles
- Built-in AT command mode for easy configuration and renaming
- Default baud rate 9600, operates at 3.3V to 6V with 3.3V TTL interface
- Up to 10 meters line-of-sight range with onboard LED status indicators
- Easy pairing with Android, Windows, laptops, and smartphones
SKU: n/a - Boards, Modules and Accessories
DC 3V-6V 1:120 Gear Ratio High Speed TT Gear Motor
- Compact design fits tight spaces in robots and small machines
- High speed output for reliable movement
- Low noise and smooth operation for precise control
- Durable, heat-resistant construction for long service life
- Energy-efficient motor and gearbox for extended runtime
- Easy to install in robotics, automation, and DIY projects
SKU: n/a - Accessories
DC Barrel Power Jack Female Connector Wire
– Standard 5.5mm x 2.1mm female DC socket compatible with most adapters
– Pre-wired with red (positive) and black (negative) leads for easy polarity identification
– Solder-free design for fast installation and prototyping
– High-quality copper conductors for reliable power transfer
– Durable construction that resists bending and frequent use
– Ideal for LED strips, Arduino, CCTV, routers, and general DIY electronicsSKU: n/a - Boards, Modules and Accessories, Accessories
Big Dotted Veroboard (10cm x 24cm)
- Large 10cm x 24cm board – ideal for complex circuits and multi-project layouts.
- Dotted pre-drilled layout with standard 2.54mm pitch for flexible component placement.
- Durable phenolic construction for strength and repeated use.
- Copper-clad side for reliable solder joints and stable electrical connections.
- Versatile for prototyping, DIY electronics, education, and experimentation.
- Compatible with standard 2.54mm leaded components, ICs, resistors and capacitors.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
PCF8574 16 Pin I2C LCD Display Module
– Connect 16×2 or 20×4 character LCDs using only four pins (VCC, GND, SDA, SCL)
– Reduces wiring and saves up to 6 GPIO pins compared to parallel LCD wiring
– Built-in PCF8574 I/O expander for stable I2C communication
– Adjustable contrast via onboard potentiometer and software-controlled backlight
– Compact, plug-and-play design that fits behind the LCD
– Compatible with Arduino, Raspberry Pi, ESP32 and major development boardsSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
MG996R Metal Gear Servo Motor (180 Degree Rotation)
Boards, Modules and Accessories, Motors, Drivers and WheelsMG996R Metal Gear Servo Motor (180 Degree Rotation)
- MG996R servo motor with durable metal gears for long-lasting performance
- High torque output – up to 9.4 kg-cm at 4.8V for heavy loads
- 180-degree rotation for precise movement control in robotics and RC
- Digital control for improved responsiveness and more accurate positioning
- Wide operating voltage: 4.8V to 7.2V for flexible power options
- Perfect for robotics, RC cars, model aircraft, and DIY electronics projects
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 DIP Board with Free USB Cable
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
SKU: n/a - Accessories
2-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Charges 2 cylindrical lithium-ion cells at once with independent slots
– Compatible with 16340, 14500, and 18650 batteries
– Modern USB Type-C input for universal compatibility and durable connection
– Smart charging with auto-adjust current, smart cut-off, and LED status indicators
– Multiple safety protections: overcharge, short-circuit, over-discharge recovery, overheat, and reverse polarity
– Compact, lightweight ABS construction with spring-loaded contacts for secure fitSKU: n/a - Accessories
GL12 840 Tie Points Solderless Breadboard
- 840 tie points solderless breadboard for quick circuit prototyping without soldering
- Full-size design with 640 main tie points and 200 power rail connections
- Standard 2.54mm pitch compatible with most electronic components and ICs
- Dual power rails for organized VCC and GND distribution
- Reusable, durable design with self-adhesive backing for easy mounting
- Ideal for Arduino, ESP32, Raspberry Pi projects and educational electronics
SKU: n/a - Boards, Modules and Accessories, Accessories
9V Battery Clip Connector
– Quick snap-on connector for 9V batteries
– Secure, stable power for Arduino and LED projects
– Durable construction for reliable long-term use
– Compact, lightweight design fits tight project spaces
– Flexible leads for easy connection to circuits and devicesSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
ESP32-CAM WiFi and Bluetooth Board with OV2640 Camera Module
Boards and Programmers, Boards, Modules and AccessoriesESP32-CAM WiFi and Bluetooth Board with OV2640 Camera Module
- 2MP OV2640 camera for sharp, high-resolution images
- Built-in Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + BLE)
- Powerful ESP32-S dual-core LX6 CPU at 160/240 MHz
- 4MB PSRAM and 8MB Flash plus MicroSD slot (up to 4GB)
- Multiple GPIOs with UART, SPI, I2C and PWM interfaces
- Compact 40mm x 27mm form factor and low power consumption
SKU: n/a - Boards, Modules and Accessories, Accessories
Small Dotted Veroboard (6.4cm x 14.5cm)
- Compact 6.4cm x 14.5cm dotted veroboard for small projects
- Pre-perforated copper tracks for easy soldering and reliable connections
- Perfect for DIY electronics, Arduino projects, and circuit prototyping
- Simple to use—ideal for hobbyists, students, and engineers
- Durable construction suitable for repeated soldering and adjustments
- Great for LED circuits, sensors, motor control, and rapid prototyping
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
TCRT5000 IR Reflective Sensor Photoelectric Switch
Boards, Modules and Accessories, Sensors And ModulesTCRT5000 IR Reflective Sensor Photoelectric Switch
- Compact IR reflective photoelectric sensor in a 4-pin package
- Built-in IR LED and phototransistor for reliable short-range detection
- Detects object presence and surface contrast (black/white) for line following
- Typical detection distance up to 15 mm depending on surface
- Low power consumption and high sensitivity for robotics and automation
- Ideal for hobbyists, students, and embedded systems projects
SKU: n/a - Accessories
Metal Film Resistors (1kΩ – 10MΩ) (1/4 Watt)
- High-precision metal film resistors with resistance values from 1kΩ to 10MΩ
- Rated at 1/4 Watt (0.25W) power dissipation for reliable performance
- Tight tolerance (typically ±1%) ensures accuracy in precision circuits
- Low electrical noise and excellent temperature stability for professional applications
- Through-hole axial lead design for easy installation on PCBs and breadboards
- Perfect for Arduino, Raspberry Pi, robotics, amplifiers, and DIY electronics projects
SKU: n/a - Boards, Modules and Accessories, Accessories
7x7mm DPDT Self Lock Type On/Off Switch
- DPDT (Double Pole Double Throw) push button switch
- 6-pin terminal configuration for controlling two circuits
- Self-locking On/Off action (press to lock ON, press again to turn OFF)
- Compact 7x7mm footprint for space-constrained designs
- Durable plastic body with metal contacts for long service life
- Easy to mount on PCBs, panels or use in breadboard prototyping
SKU: n/a
