Boards, Modules and Accessories
Showing 331–345 of 618 resultsSorted by popularity
- Accessories
JF-0530B DC 6V 1A 10mm 5N Electromagnet Solenoid Push-Pull Lock
- JF-0530B push-pull solenoid operating at 6V DC with 1A rated current for reliable low-voltage performance
- Delivers up to 5N (~0.5 kg) of force over a precise 10mm stroke length for consistent linear actuation
- Spring-return mechanism automatically resets the plunger when power is removed, ensuring repeatable push-pull cycles
- Compact metal body (~30 x 13 x 15 mm) with dual M3-compatible mounting holes for easy integration into tight enclosures
- Compatible with relay, MOSFET, and transistor driver circuits, making it ideal for Arduino and microcontroller projects
- Suitable for electronic door locks, smart home automation, vending machines, robotics, and industrial control systems
- Intermittent-duty rated with ~18-20 cm lead wires, offering safe, cost-effective electromagnetic actuation
SKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
FPV Drone Power Module V2.0 with XT60 Connectors
Boards, Modules and Accessories, RC Drones and AccessoriesFPV Drone Power Module V2.0 with XT60 Connectors
– Pre-installed XT60 connectors for low-resistance, high-current battery connections
– Accurate real-time voltage and current sensing for precise battery monitoring
– Integrated BEC (Battery Elimination Circuit) to power flight controllers and onboard electronics
– Compatible with APM, Pixhawk and most popular flight controllers
– Compact, lightweight design ideal for racing, freestyle, and long-range FPV builds
– V2.0 upgrade with improved measurement accuracy, stability, and enhanced durabilitySKU: n/a - Boards, Modules and Accessories, Sensors And Modules
FSR402 Force Sensing Resistor Pressure Sensor
– Detects pressure and force by decreasing resistance as force increases
– Thin, flexible sensor ideal for embedding in wearables and surfaces
– Analog output, easy to read with microcontrollers like Arduino or Raspberry Pi
– Suitable for light to moderate force detection, touchpads, and pressure-sensitive buttons
– Durable and reliable for repeated use in robotics, gaming, and interactive devices
– Simple to interface with voltage divider circuits for real-time measurementsSKU: n/a - Boards, Modules and Accessories
2WD Robotic Car Acrylic Sheet
- Laser-cut 2WD robotic car acrylic sheet for precise, clean edges and easy assembly.
- Pre-drilled slots and standardized mounting points for motors, wheels, sensors, and control boards.
- Lightweight yet durable acrylic provides stable support for Arduino and Raspberry Pi robot builds.
- Optimized layout for 2WD robot car chassis projects, STEM kits, and classroom use.
- Universally compatible with most robotic car accessories and Arduino-compatible chassis components.
- Ideal for hobbyists, educators, and makers building custom robot car frames and prototypes.
SKU: n/a - Boards, Modules and Accessories
PAM8403 3W 5V DC 2-Channel Audio Mini Amplifier Module
- Compact Class D amplifier module for easy integration into DIY projects.
- Operates on 5 to 12V DC for battery-powered or bench power use.
- Delivers up to 3W of clean, low-distortion audio output.
- Very low power consumption and minimal heat generation.
- Built-in volume control for quick level adjustment.
- Ideal for portable speakers, small audio systems, and electronics projects.
SKU: n/a - Boards, Modules and Accessories
ULN2003 Stepper Motor Driver Board
– Plug-and-play ULN2003 motor driver module for quick prototyping
– Compatible with 28BYJ-48 stepper motors and Arduino boards
– Robust ULN2003 driver IC, up to 500 mA per channel
– Built-in flyback diodes for protection against voltage spikes
– Quiet, stable stepping and low heat under typical loads
– Easy breadboard/shield mounting; ideal for robotics and hobby projectsSKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
XH-M604 Battery Charger Control Module 6-60V DC
Boards, Modules and Accessories, Buck, Boost Converters and RegulatorsXH-M604 Battery Charger Control Module 6-60V DC
- Intelligent charging control for safe, efficient battery charging
- Adjustable charging voltage (12V to 24V) and current (0.1A to 10A)
- Compatible with lead-acid, lithium-ion, and other rechargeable batteries
- Real-time LED indicators for charging status and full charge
- Built-in protections: overcharge, short-circuit, and reverse polarity
- Compact, easy-to-integrate design for DIY and industrial projects
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
SW-420 Vibration Sensor Module
– High sensitivity piezoelectric or accelerometer-based detection for shocks and vibration
– Dual outputs: digital (DO) and analog (AO) for flexible interfacing
– Adjustable potentiometer to fine-tune sensitivity for different environments
– Compact, low-profile module for space-saving integration
– Compatible with Arduino, Raspberry Pi and most microcontrollers
– Ideal for security alarms, industrial monitoring, robotics and detection systemsSKU: n/a - Accessories
15cm JST Female Connector Cable 2.0mm Pitch (4-Pin)
- JST PH 4-Pin Female Connector with 2.0mm pitch for multi-signal and power connections
- 15cm cable length ideal for compact robotics, drones, and embedded systems
- Plug-and-play design with no soldering required on connector side
- Compatible with JST PH male headers on Arduino, ESP32, and PCB modules
- Secure locking mechanism prevents accidental disconnection during operation
- Flexible insulated wires rated up to 2A per line for low-voltage DC applications
SKU: n/a - Motors, Drivers and Wheels
High Speed 180 Micro DC Electric Shaver Brushed Motor
- Compact 180 Micro DC Brushed Motor designed for electric shavers, trimmers, and toothbrushes
- High-speed performance delivering 10,000-20,000+ RPM depending on voltage input
- Operates on wide voltage range from 3V to 6V, with some variants up to 12V
- Small form factor ideal for portable devices and DIY electronics projects
- Low power consumption optimized for battery-operated applications
- Simple speed control through voltage variation with brushed DC mechanism
- Durable construction with high torque output suitable for driving blades and mechanical loads
SKU: n/a - Sensors And Modules
5-35V 5A PWM DC Motor Speed Controller
- Compact PWM DC motor speed controller with 5-35V DC wide voltage range compatibility
- Delivers up to 5A output current, ideal for small to medium DC motors
- Features adjustable speed knob for easy manual control using onboard potentiometer
- High efficiency PWM technology ensures minimal energy loss and low heat generation
- Perfect for DIY electronics, robotics, automation projects, and RC vehicles
- Compact design with stable performance for smooth speed variation without jerks
SKU: n/a - Sensors And Modules
Multirotor ESC Power Distribution Board
- Centralized power distribution from single battery to multiple ESCs for quadcopters and multirotor drones
- High current handling capacity up to 100A or more with large, secure solder pads
- Supports 4-8 ESC connections with organized layout reducing wiring clutter
- Compact and lightweight design (5g-10g) with standard drone mounting holes (30.5mm/45mm spacing)
- Available in multiple sizes: 30x30mm, 35x35mm, and 50x50mm variants
- Durable glass fiber PCB construction ensuring stable current delivery to all motors
SKU: n/a - Boards and Programmers, Display Modules and LCDs
ESP32 WiFi + Bluetooth Board 2.8 Inch CYD TFT Touch Screen Display
Boards and Programmers, Display Modules and LCDsESP32 WiFi + Bluetooth Board 2.8 Inch CYD TFT Touch Screen Display
– All-in-one ESP32 development board with built-in 2.8-inch full-color TFT touch screen
– Resistive touch interface for interactive user control
– Built-in dual-core ESP32 MCU with Wi-Fi and Bluetooth (BLE)
– Onboard GPIO pins, USB programming interface and low power modes
– Compatible with graphics libraries like TFT_eSPI and LVGL for GUI design
– Ideal for IoT dashboards, smart controllers, sensor displays and educationSKU: n/a
