Metal Film Resistors (1Ω – 820Ω) (1/4 Watt)


  • High-precision metal film resistors with resistance values from 1Ω to 820Ω for versatile circuit applications
  • 0.25W (1/4 Watt) power rating ideal for current limiting, voltage division, and LED protection circuits
  • Superior accuracy, low noise, and excellent temperature stability compared to carbon film resistors
  • Through-hole axial lead design for easy breadboard prototyping and PCB assembly
  • Wide operating temperature range from -55°C to +155°C ensures reliable performance in demanding environments
  • Perfect for Arduino projects, microcontroller circuits, sensor interfacing, and general electronics applications
WhatsAppChat on WhatsApp

₨ 2

The Metal Film Resistors (1Ω – 820Ω) (1/4 Watt) deliver high-precision performance for professional and hobbyist electronics projects. Manufactured using advanced metal film technology, these through-hole resistors provide excellent accuracy, minimal electrical noise, superior temperature stability, and long-term reliability that exceeds standard carbon film alternatives. Whether you’re building Arduino projects, designing power supplies, or creating LED circuits, these resistors offer the quality and consistency your applications demand.

Available in resistance values spanning 1Ω to 820Ω, these 0.25W (1/4 Watt) components are perfectly suited for current limiting, voltage division, pull-up and pull-down networks, signal conditioning, LED protection, sensor interfacing, and general-purpose circuit design. Their compact axial lead configuration makes them compatible with breadboards, PCB assemblies, prototyping platforms, educational kits, and commercial electronic devices.

Key Features of Metal Film Resistors

  • High-quality metal film construction for superior performance
  • Resistance range from 1Ω to 820Ω covering common circuit requirements
  • Power rating of 1/4 Watt (0.25W) for standard applications
  • High accuracy and exceptional stability over time
  • Low electrical noise characteristics for sensitive circuits
  • Excellent temperature performance across wide operating ranges
  • Through-hole axial lead design for universal compatibility
  • Suitable for both breadboard prototyping and PCB mounting
  • Extended operational lifespan with minimal drift
  • Ideal for professional engineering and DIY electronics projects

Technical Specifications

  • Product Type: Metal Film Resistor
  • Resistance Range: 1Ω to 820Ω
  • Power Rating: 0.25W (1/4 Watt)
  • Resistor Technology: Metal Film
  • Mounting Type: Through-Hole
  • Lead Type: Axial
  • Tolerance: Typically ±1% to ±5% (varies by manufacturer)
  • Temperature Coefficient: Typically ±50 to ±100 ppm/°C (varies by manufacturer)
  • Body Type: Cylindrical
  • Operating Temperature: Typically -55°C to +155°C
  • RoHS Compliant: Yes (varies by manufacturer)

How Metal Film Resistors Work

A resistor functions by limiting the flow of electric current through a circuit, providing a specific amount of electrical resistance. As current passes through the resistor, a portion of the electrical energy is converted into heat, enabling precise control of voltage and current levels within your design.

Metal film resistors are manufactured by depositing a thin, uniform layer of metal film onto a ceramic core substrate. This advanced manufacturing process delivers several performance advantages:

  • High precision resistance values with tight tolerances
  • Excellent long-term stability with minimal value drift
  • Low noise characteristics critical for audio and sensor applications
  • Improved temperature stability across varying conditions
  • Superior reliability compared to carbon film resistors

Available Resistance Values

This product category includes metal film resistors with values spanning 1Ω to 820Ω, covering the most commonly used resistance values in electronic circuit design. Select the specific value that matches your circuit requirements, whether for current limiting, voltage division, or impedance matching applications.

Common Applications

  • Arduino, Raspberry Pi, and microcontroller projects
  • LED current limiting and protection circuits
  • Voltage divider networks for signal scaling
  • Sensor signal conditioning and interfacing
  • Pull-up and pull-down resistor networks
  • Audio electronics and amplifier circuits
  • Power supply filtering and regulation
  • Embedded system design and development
  • Educational electronics and STEM projects
  • PCB manufacturing, repair, and prototyping

Advantages Over Carbon Film Resistors

  • Higher precision and tighter tolerance specifications
  • Significantly lower electrical noise generation
  • Exceptional temperature stability across operating ranges
  • Superior long-term reliability with minimal value drift
  • Compact through-hole design for space-efficient layouts
  • Easy to solder with standard electronics assembly techniques
  • Suitable for both professional manufacturing and hobby projects
  • Comprehensive range of resistance values available

Usage Tips and Best Practices

  • Select the correct resistance value according to your specific circuit design requirements and calculations
  • Ensure the resistor’s power dissipation does not exceed 0.25W to prevent overheating and failure
  • Verify the resistor value using the color band code or a multimeter before installation in your circuit
  • Avoid prolonged exposure to excessive heat during soldering, which may damage the resistor or alter its value
  • Store resistors in a dry, cool environment to maintain optimal performance and prevent corrosion
  • Use appropriate resistor values for current-limiting and voltage-divider applications based on Ohm’s Law calculations
  • Allow adequate spacing around resistors on PCBs to facilitate heat dissipation

Note: Images are for illustration purposes only.

Which value of metal film resistor 1/4 watt should I pick?

Pick the value your circuit calculation gives you. The 1/4 watt rating is the same across the range, so only the resistance changes.

Common starting points:

  • LED current limiting: 220Ω, 330Ω or 470Ω depending on supply voltage.
  • Pull-up and pull-down: 10kΩ is typical, but this range tops out at 820Ω, so use it where the design calls for a low value.
  • Voltage dividers and sensor interfaces: 100Ω, 120Ω, 150Ω and 180Ω cover many divider designs.
  • Base and gate resistors: 1Ω, 2.2Ω, 3.3Ω and 3.9Ω for very low values.

Values in this listing include 1Ω, 2.2Ω, 3.3Ω, 3.9Ω, 10Ω, 12Ω, 13Ω, 15Ω, 18Ω, 20Ω, 22Ω, 27Ω, 33Ω, 100Ω, 120Ω, 150Ω, 180Ω, 220Ω, 270Ω and 330Ω. Check the colour bands or a multimeter before you solder. If you are still planning the circuit, the guide on basic electronics projects for students walks through the first builds.

What should I know before ordering metal film resistors 1/4 watt?

Check the value, the power rating and the delivery details before you add to cart. Everything below comes from the product listing and our shop policy.

  • Value: confirm the resistance you need. The range is 1Ω to 820Ω, so a 10kΩ pull-up is not in this set.
  • Power: stay within 0.25W dissipation. For higher current, use a higher wattage part.
  • Mounting: through-hole axial leads fit breadboards and PCBs.
  • Price: listed at Rs. 2 per piece, checked in October 2026.
  • Delivery: nationwide across Pakistan at a flat-rate shipping of Rs. 350.
  • Support: students get parts and guidance for school, college and university projects.

You can pair these with an Adjustable Soldering Iron 60W, Solder Wire Volder 60/40 and HPET1101 PVC insulating tape 1.9mm thick for a complete bench setup. More parts are listed under Miscellaneous.

Frequently Asked Questions

What does the 1/4 watt rating mean on these resistors?

It is the maximum power the resistor can dissipate safely as heat. Keep the actual dissipation below 0.25W. If your circuit runs close to or above that figure, choose a higher wattage resistor instead. For most Arduino, LED and sensor circuits, 1/4 watt is more than enough.

Are these metal film resistors suitable for Arduino and Raspberry Pi projects?

Yes. The through-hole axial leads fit breadboards and PCBs, and the low noise and stable values suit microcontroller work. Typical uses include LED current limiting, pull-up and pull-down networks, voltage dividers and sensor interfacing. Just confirm the resistance value matches your circuit before soldering.

Can I buy a single value or do I have to take the whole set?

The listing covers values from 1Ω to 820Ω, and the product page shows the available options. Pick the specific resistance your circuit needs. If you are unsure which value to order, message us with your circuit details and we will help you choose.

How much do these resistors cost and how are they delivered?

The listed price is Rs. 2, checked in October 2026. Delivery is nationwide across Pakistan at a flat-rate shipping of Rs. 350. Orders are packed for safe transport, and students ordering for school, college or university projects can ask for guidance on the parts they need.

How do I read the value on a metal film resistor before using it?

Use the colour bands on the body, then confirm with a multimeter. Metal film resistors usually have a tolerance band, often brown for 1%. Reading the bands takes a moment and prevents a wrong value going into your board. Avoid overheating the leads when soldering, as that can shift the value.

Resistance Values (1Ω - 820Ω)

100Ω, 10Ω, 120Ω, 12Ω, 13Ω, 150Ω, 15Ω, 180Ω, 18Ω, 1Ω, 2.2Ω, 20Ω, 220Ω, 22Ω, 270Ω, 27Ω, 3.3Ω, 3.9Ω, 330Ω, 33Ω, 390Ω, 39Ω, 4.7Ω, 470Ω, 47Ω, 560Ω, 56Ω, 6.8Ω, 680Ω, 68Ω, 8.2Ω, 820Ω, 82Ω

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop