-17%

12V 2A Rechargeable Li-Ion Battery 11.1V Battery 18650 Cell Battery with BMS

Availability:

Out of stock


  • Rechargeable 11.1V Li-ion battery pack with integrated BMS protection
  • Built from 18650 cells in a 3-cell series (3S) configuration
  • Maximum charging voltage approximately 12.6V; charge current up to 2A
  • Suits robotics, Arduino, DC motor and portable electronics projects
  • Recharge with a suitable 12.6V 3S Li-ion charger only
  • Compact DC power source for DIY, STEM and educational builds
WhatsAppChat on WhatsApp

₨ 1,500 ₨ 1,800

Out of stock

Factory tested, sent sealed Film your unboxing so we can quickly replace anything damaged, missing or wrong. Returns, refunds and warranty

The 12V 2A Rechargeable Li-Ion Battery 11.1V Battery 18650 Cell Battery with BMS is a rechargeable lithium-ion battery pack designed for robotics, electronics, portable devices, DIY projects, and other applications requiring a compact DC power source.

The battery pack uses 18650 lithium-ion cells in an 11.1V nominal configuration and includes an integrated BMS (Battery Management System) for battery protection and cell management. Its nominal 11.1V output makes it suitable for many applications commonly powered by a 12V-class battery supply.

Key Features

  • 11.1V nominal rechargeable Li-ion battery pack
  • Built using 18650 lithium-ion cells
  • 3-cell series (3S) configuration
  • Integrated BMS for battery protection
  • Rechargeable battery design
  • Compact and portable
  • Suitable for robotics and electronics projects
  • Useful for Arduino and embedded applications
  • Suitable for DC motor projects
  • Designed for portable power applications

Technical Specifications

  • Product Type: Rechargeable Li-Ion Battery Pack
  • Battery Chemistry: Lithium-Ion (Li-Ion)
  • Cell Type: 18650
  • Nominal Voltage: 11.1V
  • Maximum Charging Voltage: Approximately 12.6V
  • BMS: Included
  • Charging Current: Up to 2A, subject to the specific battery/BMS configuration
  • Configuration: 3-cell series (3S)
  • Output: DC
  • Rechargeable: Yes
  • Application: Robotics, electronics, portable equipment, and DIY projects

Working Principle

The battery pack consists of three 18650 lithium-ion cells connected in series. Each Li-ion cell has a nominal voltage of approximately 3.7V, resulting in a combined nominal voltage of 11.1V.

When fully charged, the 3-cell pack reaches approximately 12.6V. The integrated BMS monitors the cells and provides protection functions such as overcharge, over-discharge, and over-current/short-circuit protection, depending on the specific BMS configuration.

The battery supplies DC power to the connected equipment and should be recharged using a suitable 12.6V 3S Li-ion charger.

Applications

  • Arduino and microcontroller projects
  • 2WD and 4WD robot cars
  • Self-balancing robots
  • DC motor projects
  • Robotics and automation
  • IoT and embedded electronics
  • Portable electronic devices
  • LED and lighting projects
  • DIY power systems
  • STEM and educational projects
  • Battery-powered control systems
  • Portable electronics projects

Advantages

  • Rechargeable and reusable
  • Uses commonly available 18650 cell technology
  • 11.1V nominal voltage suitable for many 12V-class applications
  • Integrated BMS provides battery protection
  • Compact and portable power source
  • Suitable for motor-driven projects
  • Useful for robotics and electronics
  • Convenient for DIY and educational projects

Usage Tips

  • Use a proper 12.6V 3S Li-ion charger to charge the battery pack.
  • Do not charge the battery with a standard 12V adapter unless it is specifically designed as a suitable 3S Li-ion charger.
  • Observe correct battery polarity when connecting the pack.
  • Do not short-circuit the battery terminals.
  • Avoid puncturing, crushing, or physically damaging the battery.
  • Keep the battery away from excessive heat, fire, and water.
  • Disconnect the battery when the project is not being used for extended periods.
  • The actual capacity and continuous discharge capability depend on the 18650 cells and BMS used.
  • A 2A charging rating does not necessarily mean the battery can continuously deliver 2A to a load; charging current and discharge current are separate specifications.

Note: Images are for Illustration Purposes Only.

What should I check before buying this 11.1V battery pack?

Match the pack to your project’s voltage and current needs, and plan for a proper 3S charger. The pack is 11.1V nominal and reaches about 12.6V when full, so it suits many 12V-class loads.

  • Voltage: your device should accept an 11.1V nominal supply and up to about 12.6V at full charge.
  • Charger: use a 12.6V 3S Li-ion charger. A plain 12V adapter is not a substitute.
  • Current: the 2A figure is the charging current. Continuous discharge depends on the 18650 cells and BMS inside the pack.
  • Connections: check polarity and the connector type on the pack before wiring it into your robot or project.
  • Protection: the BMS handles overcharge, over-discharge and over-current or short-circuit protection, depending on its configuration.

The pack is listed at Rs. 1,500, price checked in October 2026, and is in stock. If you are building your own pack instead, single cells are available as a Li-Ion 3.7V 18650 rechargeable battery cell (2000mAh), and a TP4056 Type-C charging protection module covers single-cell charging. More background is in our guide to cell prices in Pakistan.

How do I charge and look after the battery pack?

Charge it only with a suitable 12.6V 3S Li-ion charger, and disconnect it from your project when you are not using it.

  1. Connect the charger with correct polarity and do not exceed the pack’s rated charging current.
  2. Do not charge with a standard 12V adapter unless it is designed as a 3S Li-ion charger.
  3. Keep the pack away from excessive heat, fire and water, and never puncture, crush or short-circuit it.
  4. Store it disconnected during long breaks between projects.

For a small single-cell build, a TP4056 module handles charging and protection. For low-current breadboard work, a 9V alkaline battery with clip is a simpler option. Browse the full batteries, cells and power supply range for more.

Frequently Asked Questions

What is the difference between the 11.1V rating and the 12V in the product name?

The pack uses three 18650 cells in series, so its nominal voltage is 11.1V. When fully charged it reaches approximately 12.6V. That is why it is described as a 12V-class battery and works in many projects that expect a 12V supply, as long as the device can take the full-charge voltage.

Can I charge this battery with a normal 12V adapter?

No. Use a proper 12.6V 3S Li-ion charger. A standard 12V adapter is not designed as a 3S Li-ion charger and should not be used unless it is specifically made for that purpose. Charging current is up to 2A, subject to the battery and BMS configuration.

What does the built-in BMS actually protect against?

The integrated Battery Management System monitors the cells and provides protection such as overcharge, over-discharge and over-current or short-circuit protection, depending on the specific BMS configuration. It manages the three cells in the pack, but it does not replace correct wiring, polarity checks and safe handling on your side.

Does the 2A rating mean it can run a 2A motor?

Not necessarily. The 2A figure refers to charging current. Charging current and discharge current are separate specifications, and the continuous discharge capability depends on the 18650 cells and BMS used in the pack. Check your motor’s current draw against the pack before relying on it.

How is the battery delivered in Pakistan?

College Road Electronics is based on College Road, Rawalpindi and delivers nationwide across Pakistan at a flat-rate shipping charge of Rs 350. The pack is in stock at Rs. 1,500, price checked in October 2026. Students can also get parts and guidance for school, college and university projects.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop