You need a battery for a school project, a power bank build, or a solar setup. The market is full of options, and prices vary a lot depending on chemistry, capacity and brand.
This guide breaks down cell price in Pakistan for the most common types you will actually use. It covers dry cells, alkaline AA, 18650 lithium-ion, and the protection modules that keep lithium packs safe. Every price here is from our current stock, so you know what to expect before you order.
What is the cell price in Pakistan?
Cell price in Pakistan ranges from Rs. 50 for a single AA alkaline cell to Rs. 450 for a BMS module. AAA 4-packs cost Rs. 420, 18650 lithium-ion cells are Rs. 250 each, and AA holders start at Rs. 100. We deliver across Pakistan.
What should you check before buying a battery cell in Pakistan?
Before you look at cell price in Pakistan, match the cell to your device. Voltage, size and chemistry matter more than brand.
- Voltage: Most small devices use 1.5V dry or alkaline cells. Lithium-ion cells are 3.7V nominal. Never swap one for the other without checking.
- Size: AAA (R03), AA (LR6), and 18650 are the common sizes. An 18650 will not fit an AA holder.
- Chemistry: Alkaline cells are single-use. Lithium-ion cells are rechargeable and need a proper charger and protection.
- Capacity: For lithium cells, mAh tells you runtime. Higher mAh usually means higher price.
- Protection: Lithium packs need a BMS or protection circuit. Do not skip this.
In Pakistan, heat is a real factor. Store cells away from direct sun and do not leave them in a hot car. A cell that gets very hot will lose capacity faster.
Dry battery cell AAA price in Pakistan

The Dry battery cell AAA (4 Pcs Pack) WJX1K07 costs Rs. 420 for four cells. That works out to about Rs. 105 per cell.
These are 1.5V AAA (R03) dry cells. They suit low-drain devices like remote controls, wall clocks, toys, calculators and small LED lights. They are not rechargeable.
If you need a few spares for home or a school project, a 4-pack is convenient. For high-drain devices like cameras or motorised toys, alkaline cells will last longer.

Power Plus Premium Gold AA cell price in Pakistan

The Power Plus Premium Gold AA Battery Cell 1.5V is Rs. 50 per cell. It is a single AA alkaline cell.
Alkaline cells hold voltage better under load than zinc-carbon dry cells. That makes them a better pick for Arduino projects, sensors, toys and remotes. The Premium Gold series is leak-resistant and has a shelf life of up to 5 years when stored properly.
At Rs. 50 each, these are a good everyday choice. Buy a few extra so you are not stuck mid-project.

18650 lithium-ion cell price in Pakistan

The Li-Ion 3.7V 18650 Rechargeable Battery Cell (1500mAh) is Rs. 250. This is one of the most popular cells for DIY projects in Pakistan.
It is a 3.7V nominal lithium-ion cell with 1500mAh capacity. It fits standard 18650 holders and is used in flashlights, power banks, robotics, IoT devices and custom battery packs. It supports hundreds of charge and discharge cycles when used with a compatible charger.
Remember: lithium-ion cells need a proper CC/CV charger. Do not charge them with a random adapter. If you are building a pack, use a BMS.

Battery holders and accessories: small parts, big difference
The 4 x AA Battery Cell Holder 4-Cell Holder is Rs. 100. It holds four AA cells in series and is a simple way to power Arduino boards, small robots and DIY power banks.
For higher-current connections, the Electric Terminal Block Connector 100A is Rs. 850. It is rated for 100A continuous current and uses fire-resistant nylon housing with screw clamps. It suits power distribution in control panels and larger battery builds.
Do not overlook these small parts. A loose holder or a weak terminal can cause voltage drops and intermittent faults that are hard to trace.
BMS modules: protect your lithium pack

A BMS (Battery Management System) protects lithium cells from overcharge, over-discharge and short circuits. Two common options are the 4S and 5S modules.
The 4S 16.8V 40A Li-Ion Cell BMS Charging Protection Module costs Rs. 450. It supports 4S packs up to 16.8V and handles up to 40A continuous discharge. It has cell balancing, overcharge cutoff around 4.25V per cell, and over-discharge cutoff around 2.7V per cell.
The 5S 18/21V 20A Li-Ion Cell BMS Charging Protection Module is also Rs. 450. It is for 5S packs with nominal 18.5V and up to 21V charged. It handles 20A continuous discharge and includes balancing and multi-level protection.
Pick the BMS that matches your pack configuration. A 4S BMS will not work correctly on a 5S pack.

How to choose the right cell for your project
Start with the device or project, then work backwards to the cell.
- Low-power gadgets: AAA or AA dry cells are fine. Cheap and easy.
- Arduino and sensor projects: AA alkaline cells in a holder, or a small lithium cell with a charger.
- Power banks and portable devices: 18650 lithium-ion cells. Buy from a known source and use a proper charger.
- Robotics and e-bikes: lithium packs with a BMS. Match the series count and current rating to your motor.
- Solar storage: LiFePO4 is usually the better chemistry for deep cycling, but for small DIY solar projects, 18650 packs with a BMS can work.
If you are unsure, buy one extra cell. Testing one cell before building a full pack saves time and money.
Where to buy cells and accessories in Pakistan
You can find cells at local electronics markets, but quality varies. For consistent stock and clear specifications, order online.
College Road Electronics is based on College Road, Rawalpindi. They deliver nationwide across Pakistan with flat-rate shipping of Rs. 350. Students get parts and guidance for school, college and university projects.
Browse the full Batteries and Accessories category to see all options in one place. If you are building a lithium pack, also check the BMS Modules and Accessories section.
Which one should you pick?
For everyday devices like remotes and clocks, the AAA 4-pack at Rs. 420 is the simplest choice. For Arduino and sensor projects, the Power Plus AA cell at Rs. 50 each is a solid, low-cost option.
If you are building a rechargeable project, start with the 18650 cell at Rs. 250. Add a 4S or 5S BMS at Rs. 450 if you are making a multi-cell pack. Do not forget a holder and a proper charger.
Match the cell to your project, buy one extra, and store them cool and dry. That is the practical way to get good value from cell price in Pakistan.
Products in this guide
Dry battery cell AAA (4 Pcs Pack) WJX1K07
Electric Terminal Block Connector 100A
50kg Aluminum Weighing Load Cell Sensor
Power Plus Premium Gold AA Battery Cell 1.5V
Li-Ion 3.7V 18650 Rechargeable Battery Cell (1500mAh)
4S 16.8V 40A Li-Ion Cell BMS Charging Protection Module
5S 18/21V 20A Li-Ion Cell BMS Charging Protection Module
Frequently asked questions
What is the price of an 18650 cell in Pakistan?
The Li-Ion 3.7V 18650 Rechargeable Battery Cell (1500mAh) is Rs. 250 at College Road Electronics. Higher-capacity 18650 cells may cost more. Always buy from a source that states the real capacity, because some sellers overstate mAh ratings.
Are dry battery cells rechargeable?
No. Dry battery cells like the AAA WJX1K07 are single-use. Recharging them can cause leakage or rupture. If you need a rechargeable option, use lithium-ion cells such as the 18650 with a compatible charger. Alkaline AA cells like the Power Plus Premium Gold are also single-use.
Do I need a BMS for a lithium battery pack?
Yes. A BMS protects lithium cells from overcharge, over-discharge and short circuits. It also balances cell voltages to extend pack life. The 4S 16.8V 40A and 5S 18/21V 20A modules are two options at Rs. 450 each. Choose the one that matches your pack configuration.
What is the difference between a 4S and 5S BMS?
A 4S BMS supports four cells in series, up to 16.8V fully charged. A 5S BMS supports five cells, up to 21V. The series count must match your battery pack. Using the wrong BMS can damage cells or fail to protect them properly.
How long do alkaline AA cells last in storage?
The Power Plus Premium Gold AA cell has a shelf life of up to 5 years when stored properly. Keep them in a cool, dry place. Heat and humidity reduce shelf life. In Pakistan, avoid storing cells in direct sunlight or in hot vehicles.
Where can I buy battery cells and accessories in Pakistan?
College Road Electronics in Rawalpindi stocks cells, holders, BMS modules and terminals. They deliver nationwide with flat-rate shipping of Rs. 350. Students can get guidance for project parts. Check the Batteries and Accessories category for current stock and prices.


